Hunter Indoor Ceiling Fan - Manuals

Page 2 - gathering the tools

41814-01 01/14/2003 © 2003 Hunter Fan Company 2 22 2 2 Your new Hunter ® ceiling fan is an addition to your home or office that will provide comfort and performance for many years. Thisinstallation and operation manual gives you complete instructionsfor installing and operating your fan.We are proud...

Page 3 - preparing the fan site; choosing the fan site; preparing a new fan site

© 2003 Hunter Fan Company 41814-01 01/14/2003 3 33 3 3 A A A A An n n n ng gg ggllllle M e M e M e M e Mo o o o ou n u n u n u n u nttttti n i n i n i n i ng gg gg (Figure 3) hangs from a vaulted or angled ceiling. F FF FFiiiiig gg ggu r u r u r u r u re 3 - A e 3 - A e 3 - A e 3 - A e 3 - An n n n ...

Page 4 - installing the ceiling plate

41814-01 01/14/2003 © 2003 Hunter Fan Company 4 44 4 4 cutting the ceiling hole 1. Locate the site for the hole directly below the joist or supportbrace that will hold the outlet box and fan. 2. Cut a 4" diameter hole through the drywall or plaster of theceiling as shown in Figure 6. You will us...

Page 5 - assembling the fan; assembling the fan for a standard or angled ceiling

© 2003 Hunter Fan Company 41814-01 01/14/2003 5 55 5 5 4. Align the slotted holes (refer to Figure 10) in the ceiling platewith the pilot holes in the wood support structure. Note: Theisolation pads should be flush against the ceiling.For Angled Ceilings: Be sure to orient the ceiling plate so thatt...

Page 7 - installing the canopy trim ring; removing the canopy trim ring; assembling the blades

© 2003 Hunter Fan Company 41814-01 01/14/2003 7 77 7 7 For Flush Mounting: The arrows on the low profile washer andon the ceiling plate should be pointing in the same directionand should be pointing towards the tab hole on the canopy. 2. Hook the tab hole over the tab on the ceiling plate as shown i...

Page 8 - installing the light fixture; attaching the upper switch housing

41814-01 01/14/2003 © 2003 Hunter Fan Company 8 88 8 8 F FF FFiiiiig gg ggu r u r u r u r u re 24 - A e 24 - A e 24 - A e 24 - A e 24 - Atttttttttta aa aaccccch h h h h i n i n i n i n i ng t g t g t g t g th h h h he b e b e b e b e bllllla aa aad d d d d e t e t e t e t e to t o t o t o t o th h h...

Page 9 - installing without the light fixture

© 2003 Hunter Fan Company 41814-01 01/14/2003 9 99 9 9 7. Thread the two wires from the light fixture through the centerhole in the lower switch housing. 8. Connect the black wire from the light fixture to the black/whitewire from the lower switch housing.Connect the white wire from the light fixtur...

Page 10 - installing the lower switch housing; operating your ceiling fan

41814-01 01/14/2003 © 2003 Hunter Fan Company 1 0 1 0 1 0 1 0 1 0 installing the lower switch housing 1. Connect the upper plug connector from the motor to the lowerplug connector in the lower switch housing assembly. See Fig-ure 30NOTE: Both plug connectors are polarized and will only fit to-gether...

Page 11 - cleaning your ceiling fan; caring for finishes; troubleshooting

© 2003 Hunter Fan Company 41814-01 01/14/2003 1 1 1 1 1 1 1 1 1 1 cleaning your ceiling fan caring for finishes For cleaning, a soft brush or lint-free cloth should be used to pre-vent scratching the finish. A vacuum cleaner brush nozzle can re-move heavier dust. Surface smudges or an accumulation o...