Hunter 7 - Manuals - manualsarea.com

Page 2 - Makes Installation Fast & Easy; Blades; Installation is complete!

45051-01 • 05/12/11 • Hunter Fan Company 90% Pre-A ssembled O ut O f Th e Box! Makes Installation Fast & Easy 1. Install mounting bracket and make wiring connections 2. Attach EasyLock TM Blades Please follow the detailed installation instructions inside this manual Installation is complete!

Page 3 - Cautions and Warnings; READ THIS ENTIRE MANUAL CAREFULLY BEFORE BEGINNING; • To avoid possible electrical shock, before installing your fan,; Welc om e; *5 Minute time interval

2 45051-01 • 05/12/11 • Hunter Fan Company © 2011 Hunter Fan Company Your new Hunter ® ceiling fan is an addition to your home or office that will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and operating your ...

Page 4 - Pre parin g th e Fan Sit e; Step 1 - Choose the Fan Site; Choose a fan site where:; Checklist for Existing Fan Site

3 45051-01 • 05/12/11 • Hunter Fan Company Pre parin g th e Fan Sit e 7’ Minimum Blades to Floor 8’ Minimum Ceiling Height 30” From Wall or Nearest Obstruction Step 1 - Choose the Fan Site Proper ceiling fan location and attachment to the building structure are essential for safety, reliable operati...

Page 5 - Step 2 - Cut the Ceiling Hole; • Installing the

4 45051-01 • 05/12/11 • Hunter Fan Company Pre parin g th e Fan Sit e (c ontinu ed) CAUTION: All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. Steps 2 – 3 Step 4 Step 5 Step 2 - Cut the Ceiling ...

Page 6 - Inst al ler’s Choice and O ptional Ac ce ss orie s; Understanding Mounting and Installer’s Choice; To

5 45051-01 • 05/12/11 • Hunter Fan Company Inst al ler’s Choice and O ptional Ac ce ss orie s Understanding Mounting and Installer’s Choice ® Hunter’s patented 2-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of two ways, depen...

Page 7 - To install a ceiling fan, be sure you can do the following:; Gathering the Tools; You will need the following tools for installing the fan:; Checking Your Fan Parts; Installing Multiple Fans?; • Gettin g R eady

6 45051-01 • 05/12/11 • Hunter Fan Company To install a ceiling fan, be sure you can do the following: • Locate the ceiling joist or other suitable support in ceiling.• Drill holes for and install wood screws.• Identify and connect electrical wires.• Lift 40 pounds. If you need help installing the f...

Page 8 - ANGLED; OR; • Inst al lin g th e Han ger Bracket

7 45051-01 • 05/12/11 • Hunter Fan Company 2-1. Drill two pilot holes into the wood support structure through the outermost holes in the outlet box. The pilot holes should be 9/64” in diameter. Note: Your fan comes with four pre-installed neoprene noise isolators. 2-2. Thread the lead wires from the...

Page 9 - • Wiring the Fan; • A ssemblin g and Han g in g th e Fan

8 45051-01 • 05/12/11 • Hunter Fan Company 3-1. To assemble fan to hang down from a flat or angled ceiling, place the canopy and canopy trim ring around the adapter so that they rest on the fan assembly. 3-2. Feed the wires from the fan through the downrod. Note: Make sure all the wires are on the s...

Page 10 - • The black wire (ungrounded) from the ceiling to the black; -6. Turn the wire connectors upward and push them carefully back; •Wirin g th e Fan

9 45051-01 • 05/12/11 • Hunter Fan Company All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. Wall switches are not included. Select an acceptable general-use switch in accordance with national a...

Page 11 - • Inst al lin g th e C anopy and C anopy Trim Rin g

10 45051-01 • 05/12/11 • Hunter Fan Company 5-1. Partially install two canopy screws (about 2 full turns) in the hanger bracket. 5-2. Raise the canopy over the hanger bracket. Align partially installed screws with key slots in canopy. 5-3. Twist canopy clockwise to secure.5-4. Install third and four...

Page 12 - Open; • A ssemblin g th e Bl ade s

11 45051-01 • 05/12/11 • Hunter Fan Company 11 Our exclusive Easy Lock ™ blade assembly enables you to lock the blades in place without tools and to remove the blades easily for cleaning. 6-1. Open the locking mechanism.6-2. Align the holes in the blade with the blade iron.6-3. Close the locking mec...

Page 13 - • The chain uses a breakaway connector that separates if the; To Change Airflow Direction; • O p eratin g and Cleanin g Your C ei lin g Fan

12 45051-01 • 05/12/11 • Hunter Fan Company In warm weather , use downward air flow pattern In cold weather , use upward air flow pattern 7-1. Turn on electrical power to the fan.7-2. The fan pull chain controls power to the fan. The pull chain has four settings in sequence: High, Medium, Low and Of...

Page 14 - • Trouble sho otin g

13 45051-01 • 05/12/11 • Hunter Fan Company Problem: Nothing happens; fan does not move. 1. Turn power on, replace fuse, or reset breaker.2. Loosen canopy, check all connections according to the wiring the fan section. 3. Check the plug connection in the switch housing.4. Push motor reversing switch...