Hunter 45049-01 - Manuals - manualsarea.com

Page 2 - Your new Hunter; Cautions and Warnings; READ THIS ENTIRE MANUAL CAREFULLY BEFORE BEGINNING; • To avoid possible electrical shock, before installing your fan,; Welc om e

2 45049-01 • 07/13/09 • Hunter Fan Company Table Of Contents 1 • Getting Ready . . . . . . . . . . . . . . . . . . . . . . 4 2 • Installing the Hanger Bracket . . . . . . . 5 3 • Assembling and Hanging the Fan . . . 6 4 •Wiring the Fan . . . . . . . . . . . . . . . . . . . . . . 8 5 • Installing the...

Page 3 - Inst al ler’s Choice and O ptional Ac ce ss orie s; Understanding Mounting and Installer’s Choice; To

3 45049-01 • 07/13/09 • Hunter Fan Company Inst al ler’s Choice and O ptional Ac ce ss orie s Understanding Mounting and Installer’s Choice ® Hunter’s patented 3-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of three ways, dep...

Page 4 - To install a ceiling fan, be sure you can do the following:; Gathering the Tools; You will need the following tools for installing the fan:; Checking Your Fan Parts; Installing Multiple Fans?; • Gettin g R eady

4 45049-01 • 07/13/09 • Hunter Fan Company To install a ceiling fan, be sure you can do the following: • Locate the ceiling joist or other suitable support in ceiling.• Drill holes for and install wood screws.• Identify and connect electrical wires.• Lift 40 pounds. If you need help installing the f...

Page 5 - ANGLED; OR; • Inst al lin g th e Han ger Bracket

5 45049-01 • 07/13/09 • Hunter Fan Company 2-1. Drill two pilot holes into the wood support structure through the outermost holes in the outlet box. The pilot holes should be 9/64” in diameter. Note: Your fan comes with four pre-installed neoprene noise isolators. 2-2. Thread the lead wires from the...

Page 6 - • A ssemblin g and Han g in g th e Fan

6 45049-01 • 07/13/09 • Hunter Fan Company You can assemble your fan for standard or angled mounting as shown in steps 3-1 – 3-3. For low profile mounting (ceilings less than 8 feet high), go to steps 3-6 – 3-9 on the next page. 3-1. To assemble fan to hang down from a flat or angled ceiling, place ...

Page 7 - • A ssemblin g and Han g in g th e Fan (Low Prof i le O nly); standard

7 45049-01 • 07/13/09 • Hunter Fan Company 3 • A ssemblin g and Han g in g th e Fan (Low Prof i le O nly) You can assemble your fan for standard or angled mounting as shown in steps 3-1 – 3-3 on the previous page. For low profile mounting (ceilings less than 8 feet high), see steps 3-6 – 3-10 on thi...

Page 8 - •Wirin g th e Fan

8 45049-01 • 07/13/09 • Hunter Fan Company All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. Wall switches are not included. Select an acceptable general-use switch in accordance with national a...

Page 9 - • Inst al lin g th e C anopy and C anopy Trim Rin g

9 45049-01 • 07/13/09 • Hunter Fan Company 5-1. Partially install two canopy screws (about 2 full turns) in the hanger bracket. 5-2. Raise the canopy over the hanger bracket. Align partially installed screws with key slots in canopy. 5-3. Twist canopy clockwise to secure.5-4. Install third & fou...

Page 10 - • A ssemblin g th e Bl ade s

10 45049-01 • 07/13/09 • Hunter Fan Company Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan).6-1. Your fan may include blade grommets. If your fan has grommets, insert them by hand into the holes on the blades. 6-2. Attach each blade to a blade iron using t...

Page 11 - • Li g ht/Sp eaker A ssembly Inst al l ation

11 45049-01 • 07/13/09 • Hunter Fan Company 7-1. To attach the upper switch housing, partially install two housing assembly screws into the switch housing mounting plate. 7-2. Feed the upper plug connector through the center opening of the housing. 7-3. Align the keyhole slots in the housing with th...

Page 14 - Installing the Glass Bowl; through the pull chain guide.; •Gl ass Inst al l ation

14 45049-01 • 07/13/09 • Hunter Fan Company Installing the Glass Bowl 8-1. Remove protective foam ring from threaded portion of light kit/speaker assembly. 8-2. Install B10 candelabra bulbs (40 Watt Maximum) into the sockets. 8-3. Place the glass bowl over the light kit/speaker assembly, ensuring th...

Page 15 - • The chain uses a breakaway connector that separates if the; • O p eratin g and Cleanin g Your C ei lin g Fan

15 45049-01 • 07/13/09 • Hunter Fan Company In warm weather , use downward air flow pattern In cold weather , use upward air flow pattern 9-1. Turn on electrical power to the fan.9-2. The fan pull chain controls power to the fan. The pull chain has four settings in sequence: High, Medium, Low, and O...

Page 16 - or you can install it with; Speaker; Considering Optional Accessories; the MaestroTM at least; away from all; 0 • Inst al l ation and Setup of Ma e stroTM and R emot e

16 45049-01 • 07/13/09 • Hunter Fan Company To accommodate different audio systems and devices, the Maestro™ can be installed in one of two ways. You can choose to install the Maestro™ with 3.5mm Stereo Cable or you can install it with Speaker Wire. Considering Optional Accessories Consider using So...

Page 17 - 0 • Inst al l ation and Setup of Ma e stroTM and R emot e (Continu ed); Powering the MaestroTM:; DO NOT put MaestroTM in a damp

17 45049-01 • 07/13/09 • Hunter Fan Company 10 • Inst al l ation and Setup of Ma e stro™ and R emot e (Continu ed) Powering the Maestro™: 10-1. Plug the AC adaptor into the back of the Maestro™ in the port labeled power. 10-2. Select the correct channel by sliding the switch to the desired channel. ...

Page 19 - same channel; Channel 1; 2 • Chan g in g th e chann el on th e Ma e stroTM and th e Fan

19 45049-01 • 07/13/09 • Hunter Fan Company NOTE: The Maestro™ transmitter and the fan must be on the same channel to transmit and receive properly. 12-1. To change the channel on the Maestro™, slide the channel selection switch on the lower right corner of the transmitter. 12-2. To change the chann...

Page 20 - Problem: Lights dim when turned on or do not turn on.; Check to make sure the wattage and type of light bulbs installed; Problem: Interference with wireless devices.; 3 • Trouble sho otin g

20 45049-01 • 07/13/09 • Hunter Fan Company Problem: Nothing happens; fan does not move. 1. Turn power on, replace fuse, or reset breaker.2. Loosen canopy, check all connections according to the wiring the fan section. 3. Check the plug connection in the switch housing.4. Push motor reversing switch...