Hunter 45003-01 - Manuals - manualsarea.com

Page 2 - Your new Hunter; Cautions and Warnings; READ THIS ENTIRE MANUAL CAREFULLY BEFORE BEGINNING; • To avoid possible electrical shock, before installing your fan,; Welc om e

2 45003-01 • 07/02/2009 • Hunter Fan Company Table of Contents 1 • Getting Ready ................................................... 4 2 • Installing the Hanger Bracket ................... 5 3 • Assembling and Hanging the Fan .......... 6 4 • Wiring the Fan .............................................

Page 3 - Inst al ler’s Choice and O ptional Ac ce ss orie s; Understanding Mounting and Installer’s Choice; To reduce the risk of personal

3 45003-01 • 07/02/2009 • Hunter Fan Company Inst al ler’s Choice and O ptional Ac ce ss orie s Understanding Mounting and Installer’s Choice ® Hunter’s patented mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of two ways, depending on c...

Page 4 - • Gettin g R eady; To install a ceiling fan, be sure you can do the following:; Gathering the Tools; You will need the following tools for installing the fan:; Checking Your Fan Parts; Installing Multiple Fans?

4 45003-01 • 07/02/2009 • Hunter Fan Company 1 • Gettin g R eady To install a ceiling fan, be sure you can do the following: • Locate the ceiling joist or other suitable support in ceiling.• Drill holes for and install wood screws.• Identify and connect electrical wires.• Lift 40 pounds. If you need...

Page 5 - • Inst al lin g th e Han ger Bracket; ANGLED; OR

5 45003-01 • 07/02/2009 • Hunter Fan Company 2 • Inst al lin g th e Han ger Bracket 2-1. Drill two pilot holes into the wood support structure through the outermost holes in the outlet box. The pilot holes should be 9/64” in diameter. Note: Your fan comes with four pre-installed neoprene noise isola...

Page 6 - • A ssemblin g and Han g in g th e Fan

6 45003-01 • 07/02/2009 • Hunter Fan Company 3-1. To assemble fan to hang down from a flat or angled ceiling, place the canopy and canopy trim ring around the adapter so that they rest on the fan assembly. 3-2. Feed the wires from the fan through the downrod. Note: Make sure all the wires are on the...

Page 7 - •Wirin g th e Fan; qualified electrician.; • The black wire (ungrounded) from the ceiling to the black; -6. Turn the wire connectors upward and push them carefully back

7 45003-01 • 07/02/2009 • Hunter Fan Company 4 •Wirin g th e Fan All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. Wall switches are not included. Select an acceptable general-use switch in acco...

Page 8 - • Inst al lin g th e C anopy and C anopy Trim Rin g; screws with key slots in canopy.

8 45003-01 • 07/02/2009 • Hunter Fan Company 5 • Inst al lin g th e C anopy and C anopy Trim Rin g 5-1. Partially install two canopy screws (about 2 full turns) in the hanger bracket. 5-2. Raise the canopy over the hanger bracket. Align partially installed screws with key slots in canopy. 5-3. Twist...

Page 9 - • A ssemblin g th e Bl ade s

9 45003-01 • 07/02/2009 • Hunter Fan Company 6 • A ssemblin g th e Bl ade s Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan).6-1. Your fan may include blade grommets. If your fan has grommets, insert them by hand into the holes on the blades. 6-2. Attach ea...

Page 10 - • Completin g Your Inst al l ation With a Bow l Li g ht Fi xture; Your Hunter fan comes with an integrated light fixture assembly.; assembly screws into the switch housing mounting plate.

10 45003-01 • 07/02/2009 • Hunter Fan Company 7 • Completin g Your Inst al l ation With a Bow l Li g ht Fi xture Your Hunter fan comes with an integrated light fixture assembly. WARNING: Use only the light fixture supplied with this fan model. 7-1. To attach the upper switch housing, partially insta...

Page 12 - Installing the Glass Bowl; -8. Place the glass bowl over the heater vent, ensuring the threaded

12 45003-01 • 07/02/2009 • Hunter Fan Company 7 • Completin g Your Inst al l ation With a Bow l Li g ht Fi xture (Continu ed) Installing the Glass Bowl 7-7. First install B10 candelabra bulbs (40 Watt Maximum) into the sockets. 7-8. Place the glass bowl over the heater vent, ensuring the threaded po...

Page 13 - • A ssemblin g th e R emot e Control and Mountin g th e Crad le; To install the remote cradle on a switch plate,

13 45003-01 • 07/02/2009 • Hunter Fan Company 8 • A ssemblin g th e R emot e Control and Mountin g th e Crad le 8-1. To install the battery, remove the back cover of the remote. Insert the included 12-volt alkaline battery (Type 23A, MN-21 or equivalent) inside the remote, matching polarity on the b...

Page 14 - Setting the DIP switches; removed when changing DIP switch settings. Refer to Step 8-1.

14 45003-01 • 07/02/2009 • Hunter Fan Company 8 • A ssemblin g th e R emot e Control and Mountin g th e Crad le (Continu ed) Setting the DIP switches You will only have to change the DIP switch settings in the remote if you are using more than one remote controlled fan in the same area and want to c...

Page 15 - • O p eratin g and Cleanin g Your C ei lin g Fan; AUTO RESUME FEATURE

15 45003-01 • 07/02/2009 • Hunter Fan Company 9 • O p eratin g and Cleanin g Your C ei lin g Fan Normal Operation: The heater must be turned off. Heater Function: make sure the ceiling fan is turned off AUTO RESUME FEATURE This fan contains a receiver with an auto resume feature. The receiver rememb...

Page 16 - Problem: Lights dim when turned on or do not turn on; Check to make sure wattage of light bulbs installed match the; Problem: If the light on this fan shuts off suddenly.; 0 • Trouble sho otin g

16 45003-01 • 07/02/2009 • Hunter Fan Company Problem: Nothing happens; fan does not move. 1. Turn power on, replace fuse, or reset breaker.2. Loosen canopy, check all connections according to the wiring the fan section. 3. Check the plug connection in the switch housing.4. Push motor reversing swit...