Hunter 44134 - Manuals - manualsarea.com

Page 2 - Table of Contents

44067-01 • 08/03/2012 2 Table of Contents At A Glance Know Your Thermostat � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 3 Setup Setting Day and Time � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � ...

Page 3 - settings. Most settings have been preset for optimal performance.; If you need any assistance with installation or setup of your; Know Your Thermostat

©2012 Hunter Fan Company 3 Your thermostat has been pre-programmed from the factory with no programming necessary. We recommend using these pre-programmed settings for a few days before altering them as they offer maximum energy saving benefits. If you do decide to alter your programs, use the chart...

Page 4 - Your Hunter programable thermostat:

44067-01 • 08/03/2012 4 1. Enters Schedule Setup for altering scheduled programs. 2. Sets the Save Away feature for when you will not be home during a regularly programmed time. 3. Confirms completion of an action or returns you to the Home screen. 4. Allows access to the advanced features of the th...

Page 6 - Uses a condensing unit for cooling and a

44067-01 • 08/03/2012 6 1. Holds 2 “AA” Batteries. 2. HE/HG Switch - allows you to set your furnace to Gas/Oil or Electric, based on the type of system you have. 3. Allows your thermostat to operate your HVAC system* properly by indicating the system type that you have. *Conventional System: Uses a ...

Page 9 - Wed; Filter; At Home

Page 10 - Setting Day and Time

44067-01 • 08/03/2012 10 Setting Day and Time Once you install the batteries, the thermostat will prompt you to set the current day and time. 1. You will notice that “Mon” will be flashing at the top left of your screen. Use the or buttons to move to your current day of the week and press the Next b...

Page 12 - Scheduling Introduction

44067-01 • 02/09/2012 12 • The schedule time can be set in 15 minute increments, and remains the same for both Heat and Cool programs. • The scheduled temperature can be set in increments of 1°F (1°C). • After 15 minutes without a key press, the thermostat will return to the home display screen and ...

Page 13 - Personal Scheduling Charts; Default Schedule

©2012 Hunter Fan Company 13 Personal Scheduling Charts Day Away Asleep Home Weekdays Start Time: 8:00am End Time: 6:00pm Heat Temp: 63 O F (17 O C) Cool Temp: 82 O F (28 O C) Start Time: 10:00pm End Time: 6:00am Heat Temp: 67 O F (19 O C) Cool Temp: 76 O F (24 O C) Heat Temp: 71 O F (22 O C) Cool Te...

Page 14 - Setting Your Schedule

44067-01 • 08/03/2012 14 Setting Your Schedule 1. Press the Schedule Button to enter Scheduling mode. 2. Use the or buttons to select “On” and then Next to move forward to Scheduling. Note: If you do not wish to use the scheduling option on your thermostat, refer to page 20, step 2. 3. Monday thru F...

Page 18 - Temporary Temperature Change

44067-01 • 08/03/2012 18 Temporary Temperature Change With Temporary Temperature Change you have the ability to alter the temperature for only the current running schedule for one day.1. Press the or button once to activate the screen, the backlight will come on. 2. Use the or buttons again to selec...

Page 19 - Temporary Schedule Change

Page 20 - Turning Off Scheduling

44067-01 • 08/03/2012 20 Turning Off Scheduling To turn off your schedule and have the thermostat permanently set to one temperature:1. Press the Schedule button once. 2. Use the or button to switch to Off and select Done/ Home . 3. The screen will show “Updated!” and return you to the home screen. ...

Page 22 - Save Away

44067-01 • 08/03/2012 22 Save Away The Save Away feature allows you to set a lower or higher temperature for time you will be away from your home outside of your normal Away schedule. This can include days you will be away for vacation, or a few hours away from your home. The Save Away feature can b...

Page 24 - Alerts

44067-01 • 08/03/2012 24 Alerts This chapter will outline the various alerts the thermostat will report to you and how to respond to them. 1. Low Battery: This icon will appear when your batteries are starting to run low on power and should be changed to avoid system interruptions, (Figure 1) Change...

Page 25 - aux

Page 26 - Menu Options

44067-01 • 08/03/2012 26 Menu Options Under your Menu options you have the ability to reset your filter counter, change your day/time settings, and change first and second stage spans. To change each setting, you will need to hit the Next button to move through each feature.To access these options:1...

Page 27 - yn

Page 30 - Additional Features; Armchair Programming; minutes after it has been shut down.; System Protection; or if you just want to reset and start over, press and hold the and; Reset

44067-01 • 08/03/2012 30 Additional Features There is no need to stand at the wall where the thermostat is mounted while programming or changing settings. Simply remove the thermostat from the wall and make the necessary changes in the comfort of a chair. You can also set your programming and settin...

Page 31 - Troubleshooting and Support; Check battery position and battery life.

©2012 Hunter Fan Company 31 Troubleshooting and Support Problem: No display. Solution: 1. Check battery position and battery life. Problem: Program does not change at desired setting. Solution: 1. Check the time in all programs for proper am/pm time.2. Ensure thermostat is not in “Save Away” mode.3....

Page 33 - Technical Support; Hours of operation are from 7:00 am to 7:00 pm Monday - Friday and

©2012 Hunter Fan Company 33 Technical Support If you need any assistance with installation or setup of your new Hunter thermostat, please call us. Our technical support staff is ready to help! USA: 1-888-830-1326 Canada: 1-866-268-1936 Hours of operation are from 7:00 am to 7:00 pm Monday - Friday a...

Page 34 - Year Limited Warranty

44067-01 • 08/03/2012 34 1 Year Limited Warranty Hunter Fan Company Thermostats LIMITED WARRANTY The Hunter Fan Company warrants your Hunter Thermostat to be free from defects in material or workmanship for a period of one year from the date of sale to the original user or consumer purchaser. If you...