Hunter 43553-01 - Manuals - manualsarea.com

Page 2 - Table Of Contents; Your new Hunter; Cautions and Warnings; • READ THIS ENTIRE MANUAL CAREFULLY BEFORE BEGINNING; Welc om e

2 43553-01 • 05/15/09 • Hunter Fan Company Table Of Contents 1 • Installing the Light fixture on Fans With Removable Switch Housings . . . . . . . 4 2 • Installing the Light fixture on Fans With Non-Removable Switch Housings . . 6 3 • Installing the Light fixture on the Hunter Originals . . . . . . ...

Page 3 - Inst al l ation Metho d s of Hunt er® C ei lin g Fans Ty p e A-Z; Removable Switch Housing; Preparing the Light Fixture

3 43553-01 • 05/15/09 • Hunter Fan Company Inst al l ation Metho d s of Hunt er® C ei lin g Fans Ty p e A-Z Removable Switch Housing Non-removable Switch Housing The Hunter Original Your ® light fixture can be installed in one of three ways, depending on the type of switch housing. The steps in this...

Page 4 - WARNING: Improper installation could

4 43553-01 • 05/15/09 • Hunter Fan Company 1. Unscrew the three screws from the upper switch housing. Disconnect the 9-pin plug connectors. Remove the lower switch housing. 2. Push the plug button from inside the lower switch housing to remove the plug button and switch housing cap. NOTE: Save the p...

Page 5 - CAUTION: Be sure no bare metal wires or wire strands are; visible after making the connections.

5 43553-01 • 05/15/09 • Hunter Fan Company 1 • Inst al lin g th e Li g ht f i xture on Fans With R emovable Sw itch Housin g (Continu ed) 7. Remove the wire connectors from the two wires in the switch housing labeled “Connect Light Here” or “For Light Use.” To connect the wires, hold the bare metal ...

Page 6 - CAUTION: Be sure no bare

6 43553-01 • 05/15/09 • Hunter Fan Company 1. Uninstall the two attachment screws from the switch housing cover.2. Remove the plug or screw from the center of the switch housing cover.3. Thread the switch housing cover onto the light fixture. Align the screw holes in the light fixture with the screw...

Page 7 - Attach the light fixture to the switch housing with the two

7 43553-01 • 05/15/09 • Hunter Fan Company 2 • Inst al lin g th e Li g ht f i xture on Fans With Non-R emovable Sw itch Housin g s Cont. 9. Attach the light fixture to the switch housing with the two screws included with the light fixture, aligning the holes in the light fixture, switch housing cove...

Page 8 - making the connections.; • Inst al lin g th e Li g ht f i xture on th e Hunt er O ri g inal s

8 43553-01 • 05/15/09 • Hunter Fan Company 1. Uninstall the two screws from the switch housing plate. NOTE: Save the switch housing plate should you choose to remove the light fixture in the future. 2. Remove the wire connectors from the two wires in the switch housing labeled “Connect Light Here” o...

Page 9 - Install four purchased shades for the light fixture. For each; • Inst al lin g Bul bs and Shade s

9 43553-01 • 05/15/09 • Hunter Fan Company Shade Cup CFL bulb (included) 1. Install four purchased shades for the light fixture. For each light, loosen the three thumbscrews in the shade cup. Place the shade into the shade cup and tighten the thumbscrews. 2. Install the included CFL light bulbs.3. T...

Page 10 - Troubleshooting; your ceiling fan manual for locating assembly and wiring.; This Light Fixture Weighs 4 lbs.; • Trouble sho otin g

10 43553-01 • 05/15/09 • Hunter Fan Company Troubleshooting Light does not come on.1. Make sure bulbs are installed properly.2. Make sure breakers or fuses are on.3. Verify that the light power lead is connected at the ceiling. Refer to your ceiling fan manual for locating assembly and wiring. Glass...