Hunter 42888-01 - Manuals - manualsarea.com

Page 2 - Cautions and Warnings; READ THIS ENTIRE MANUAL CAREFULLY BEFORE BEGINNING; • To avoid possible electrical shock, before installing your fan,; Welc om e

2 42888-01 • 03/01/10 • Hunter Fan Company © 2010 Hunter Fan Company Your new Hunter ® ceiling fan is an addition to your home or office that will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and operating your ...

Page 3 - Step 1 - Choose the Fan Site; Choose a fan site where:; Checklist for Existing Fan Site; Pre parin g th e Fan Sit e

3 42888-01 • 03/01/10 • Hunter Fan Company 7’ Minimum Blades to Floor 8’ Minimum Ceiling Height 30” From Wall or Nearest Obstruction Step 1 - Choose the Fan Site Proper ceiling fan location and attachment to the building structure are essential for safety, reliable operation, maximum efficiency, and...

Page 4 - Step 2 - Cut the Ceiling Hole; • Installing the

4 42888-01 • 03/01/10 • Hunter Fan Company Pre parin g th e Fan Sit e (c ontinu ed) CAUTION: All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. Steps 2 – 3 Step 4 Step 5 Step 2 - Cut the Ceiling ...

Page 5 - Mountin g and O ptional Ac ce ss orie s; Understanding Mounting; To reduce the risk of

5 42888-01 • 03/01/10 • Hunter Fan Company Mountin g and O ptional Ac ce ss orie s Understanding Mounting Hunter’s patented mounting system provides you maximum ease in installing your fan. This fan was designed to be mounted only on flat ceilings and can be used on ceilings less than 8 feet high. C...

Page 6 - To install a ceiling fan, be sure you can do the following:; Gathering the Tools; You will need the following tools for installing the fan:; Checking Your Fan Parts; Installing Multiple Fans?; • Gettin g R eady

6 42888-01 • 03/01/10 • Hunter Fan Company To install a ceiling fan, be sure you can do the following: • Locate the ceiling joist or other suitable support in ceiling.• Drill holes for and install wood screws.• Identify and connect electrical wires.• Lift 40 pounds. If you need help installing the f...

Page 7 - • Inst al lin g th e Han ger Bracket

7 42888-01 • 03/01/10 • Hunter Fan Company CAUTION: To avoid possible electrical shock, before installing your fan, disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. If you cannot lock the circuit breakers in the off position, securely fa...

Page 8 - -3. Install two locking screws through the holes in the side of the; • A ssemblin g and Han g in g th e Fan

8 42888-01 • 03/01/10 • Hunter Fan Company Step 3-2 #8-32 x 1” Screw Green Ground Wire 3-1. Position the square hanger so that the green ground wire attached to the square faces out of the large opening in the metal bracket. 3-2. Holding the wires out of the way, lift the motor assembly and place th...

Page 9 - •Wirin g th e Fan

9 42888-01 • 03/01/10 • Hunter Fan Company All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. Wall switches are not included. Select an acceptable general-use switch in accordance with national a...

Page 10 - housing and into the hanger bracket. Securely tighten all screws.; • Inst al lin g th e Motor Housin g

10 42888-01 • 03/01/10 • Hunter Fan Company 5-1. Place the fan housing over the motor. 5-2. Align the keyholes in the fan housing with the two partially installed canopy screws in the hanger bracket. Rotate the fan housing to situate the screws in the narrow ends of the keyholes. 5-3. Install the tw...

Page 11 - • A ssemblin g th e Bl ade s

11 42888-01 • 03/01/10 • Hunter Fan Company Step 6-1 (Detail) Grommet Blade Assembly Screws Use with grommet Use without grommet Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan).6-1. Your fan may include blade grommets. If your fan has grommets, insert them...

Page 12 - -3. Turn the housing counterclockwise until the housing assembly; -4. To attach the lower switch housing, connect the upper plug; • Completin g Your Inst al l ation With a Multi St aked Li g ht Fi xture

12 42888-01 • 03/01/10 • Hunter Fan Company Plug Connector Detail WARNING: Use only the light fixture supplied with this fan model. 7-1. To attach the upper switch housing, partially install two #6-32 x 3/8” housing assembly screws into the switch housing mounting plate. 7-2. Align the keyhole slots...

Page 13 - Glass shade style and number of lights may vary.

13 42888-01 • 03/01/10 • Hunter Fan Company Note: Glass shade style and number of lights may vary. 7-6. To install each shade, first loosen the three thumbscrews.7-7. Raise the shade to the light fixture. Tighten the thumbscrews securely. 7-8. Install the included B10 candelabra-based light bulbs (6...

Page 14 - • The chain uses a breakaway connector that separates if the; To Change Airflow Direction; • O p eratin g and Cleanin g Your C ei lin g Fan

14 42888-01 • 03/01/10 • Hunter Fan Company In warm weather , use downward air flow pattern In cold weather , use upward air flow pattern 8-1. Turn on electrical power to the fan.8-2. The fan pull chain controls power to the fan. The pull chain has four settings in sequence: High, Medium, Low and Of...

Page 15 - • Trouble sho otin g

15 42888-01 • 03/01/10 • Hunter Fan Company Problem: Nothing happens; fan does not move. 1. Turn power on, replace fuse, or reset breaker.2. Loosen canopy, check all connections according to the wiring the fan section. 3. Check the plug connection in the switch housing.4. Push motor reversing switch...