Hunter 42774-01 - Manuals - manualsarea.com

Page 2 - Cautions and Warnings; READ THIS ENTIRE MANUAL CAREFULLY BEFORE BEGINNING; • To avoid possible electrical shock, before installing your fan,; Welc om e

2 42774-01 • 06/12/09 • Hunter Fan Company © 2009 Hunter Fan Company Your new Hunter ® ceiling fan is an addition to your home or office that will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and operating your ...

Page 3 - Pre parin g th e Fan Sit e; Step 1 - Choose the Fan Site; Choose a fan site where:; Checklist for Existing Fan Site

3 42774-01 • 06/12/09 • Hunter Fan Company Pre parin g th e Fan Sit e Step 1 - Choose the Fan Site Proper ceiling fan location and attachment to the building structure are essential for safety, reliable operation, maximum efficiency, and energy savings. Choose a fan site where: • No object can come ...

Page 4 - Step 2 - Cut the Ceiling Hole; the hole to install the support brace and outlet box.; Step 3 - Install a Support Brace, If Necessary; your ceiling fan, go to your fan manual and continue with Section; • Installing the

4 42774-01 • 06/12/09 • Hunter Fan Company Pre parin g th e Fan Sit e (c ontinu ed) Step 2 - Cut the Ceiling Hole 2-1. Locate the site for the ceiling hole directly below the joist or support brace that will hold the outlet box and fan.2-2. Cut a 4” diameter hole through the drywall or plaster of th...

Page 5 - Inst al ler’s Choice and O ptional Ac ce ss orie s; Understanding Mounting and Installer’s Choice; To

5 42774-01 • 06/12/09 • Hunter Fan Company Inst al ler’s Choice and O ptional Ac ce ss orie s Understanding Mounting and Installer’s Choice ® Hunter’s patented 3-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of three ways, dep...

Page 6 - To install a ceiling fan, be sure you can do the following:; Gathering the Tools; You will need the following tools for installing the fan:; Checking Your Fan Parts; Installing Multiple Fans?; • Gettin g R eady

6 42774-01 • 06/12/09 • Hunter Fan Company To install a ceiling fan, be sure you can do the following: • Locate the ceiling joist or other suitable support in ceiling.• Drill holes for and install wood screws.• Identify and connect electrical wires.• Lift 40 pounds. If you need help installing the f...

Page 7 - • Inst al lin g th e C ei lin g Pl at e

7 42774-01 • 06/12/09 • Hunter Fan Company CAUTION: To avoid possible electrical shock, before installing your fan, disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. If you cannot lock the circuit breakers in the off position, securely fa...

Page 8 - -1. To assemble the housing to the hanger adapter, align the three; • A ssemblin g th e Top Housin g

8 42774-01 • 06/12/09 • Hunter Fan Company 3-1. To assemble the housing to the hanger adapter, align the three raised tabs on the hanger adapter with the three narrow notches in the top housing. Make certain the housing sits flat on the adapter. 3-2. Install three (3) assembly screws (#8-32) and tig...

Page 9 - For Standard or Angled mounting:; • A ssemblin g and Han g in g th e Fan

9 42774-01 • 06/12/09 • Hunter Fan Company Steps 4-5 – 4-6 Low Profile Screw Low Profile Washer Steps 4-2 – 4-3 Downrod Canopy Canopy Trim Ring Set Screw WARNING: Fan may fall if not assembled as directed in these installation instructions. 4-1. Unbundle the wires from the fan. For Standard or Angle...

Page 10 - fsdfsdf; Single Switch Wiring:; • The black wire (ungrounded) from the ceiling to the black; ceiling plate into the outlet box.; • Wirin g th e Fan

10 42774-01 • 06/12/09 • Hunter Fan Company fsdfsdf All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70-1999. If you are unfamiliar with wiring, use a qualified electrician. Wall switches are not included. Select an acceptable general-use switch in accordance w...

Page 11 - • Inst al lin g th e C anopy and C anopy Trim Rin g

11 42774-01 • 06/12/09 • Hunter Fan Company 6-1. Holding the canopy, raise the fan off the hook.6-2. Align the slots in the canopy with the tabs on the ceiling plate.6-3. Raise the canopy over the ceiling plate. Rotate the canopy clockwise until the tabs on the ceiling plate totally engage with the ...

Page 12 - -1. Attach each blade to the fan using three blade assembly; • A ssemblin g th e Bl ade s

12 42774-01 • 06/12/09 • Hunter Fan Company 7-1. Attach each blade to the fan using three blade assembly screws. Blade Assembly Screw Step 7-1 7 • A ssemblin g th e Bl ade s

Page 13 - • Inst al lin g th e Sw itch Housin g

13 42774-01 • 06/12/09 • Hunter Fan Company 8-1. Assemble the bottom cover by aligning the small rectangular hole in the cover with the fan reversing switch and the round hole in the cover with the pull chain switch. Holding the cover at an angle, you must first place the rectangular hole in the rev...

Page 14 - • The chain uses a breakaway connector that separates if the; To Change Airflow Direction; • O p eratin g and Cleanin g Your C ei lin g Fan

14 42774-01 • 06/12/09 • Hunter Fan Company In warm weather , use downward air flow pattern In cold weather , use upward air flow pattern 9-1. Turn on electrical power to the fan.9-2. The fan pull chain controls power to the fan. The pull chain has four settings in sequence: High, Medium, Low and Of...

Page 15 - 0 • Trouble sho otin g

15 42774-01 • 06/12/09 • Hunter Fan Company Problem: Nothing happens; fan does not move. 1. Turn power on, replace fuse, or reset breaker.2. Loosen canopy, check all connections according to the wiring the fan section. 3. Check the plug connection in the switch housing.4. Push motor reversing switch...