Hunter 42501-01 - Manuals - manualsarea.com

Page 2 - Your new Hunter; Cautions and Warnings; • To avoid possible electrical shock, before installing your fan,; Welc om e

2 Hunter Fan Company 42501-01 • 10/24/05 Your new Hunter ® ceiling fan is an addition to your home or office that will provide comfort and performance for many years. is installation and operation manual gives you complete instructions for installing and operating your fan. We are proud of our work...

Page 3 - Inst al ler’s Choice and O ptional Ac ce ss orie s; Understanding Mounting and Installer’s Choice

3 42501-01 • 10/24/05 Hunter Fan Company Inst al ler’s Choice and O ptional Ac ce ss orie s Understanding Mounting and Installer’s Choice ® Hunter’s patented 3-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of three ways, depen...

Page 4 - To install a ceiling fan, be sure you can do the following:; Gathering the Tools; You will need the following tools for installing the fan:; Checking Your Fan Parts; • Gettin g R eady; Installing Multiple Fans?

4 Hunter Fan Company 42501-01 • 10/24/05 To install a ceiling fan, be sure you can do the following: • Locate the ceiling joist or other suitable support in ceiling.• Drill holes for and install wood screws.• Identify and connect electrical wires.• Lift 40 pounds. If you need help installing the fan...

Page 5 - • Inst al lin g th e C ei lin g Pl at e; Be sure to

5 42501-01 • 10/24/05 Hunter Fan Company 2-1. Drill two pilot holes into the wood support structure through the outermost holes in the outlet box. e pilot holes should be 9/64” in diameter. 2-2. Your fan comes with four neoprene noise isolators (“Isolators”). Position the isolators between the ceil...

Page 6 - • A ssemblin g and Han g in g th e Fan; • Wiring the Fan

6 Hunter Fan Company 42501-01 • 10/24/05 3 • A ssemblin g and Han g in g th e Fan Steps 3-3 – 3-4 #8-32 x 3/4” Screw Low Profile Washer Step 3-5 U-shaped Hole You can assemble your fan for standard mounting (steps 3-1 – 3-2) orfor low profile mounting (steps 3-3 – 3-4). 3-1. To assemble the fan to h...

Page 7 - • Wirin g th e Fan

7 42501-01 • 10/24/05 Hunter Fan Company 4 • Wirin g th e Fan All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. 4-1. Disconnect the power by turning off the circuit breakers to the outlet box an...

Page 8 - • Inst al lin g th e C anopy and C anopy Trim Rin g; -4. Loosely assemble the three canopy screws into the canopy one at

8 Hunter Fan Company 42501-01 • 10/24/05 5 • Inst al lin g th e C anopy and C anopy Trim Rin g 5-1. Holding the canopy, raise the fan off the hook.5-2. Align the slots in the canopy with the tabs on the ceiling plate.5-3. Raise the canopy over the ceiling plate. Rotate the canopy clockwise until the...

Page 9 - • A ssemblin g th e Bl ade s; insert them by hand into the holes on the blades.

9 42501-01 • 10/24/05 Hunter Fan Company 6 • A ssemblin g th e Bl ade s Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan).6-1. Your fan may include blade grommets. If your fan has grommets, insert them by hand into the holes on the blades. 6-2. Install three...

Page 10 - • Inst al lin g th e Sw itch Housin g; -2. Feed the upper plug connector through the center opening of

10 Hunter Fan Company 42501-01 • 10/24/05 7 • Inst al lin g th e Sw itch Housin g 7-1. To attach the upper switch housing, partially install two #6-32 x 3/8” housing assembly screws into the switch housing mounting plate. 7-2. Feed the upper plug connector through the center opening of the housing. ...

Page 11 - Setting Jumper Switches; • Settin g th e R emot e Transmitt er and R e ceiver

11 42501-01 • 10/24/05 Hunter Fan Company CAUTION: e remote control device complies with part 15 of the FCC rules. Changes or modifications not expressly approved by Hunter Fan Company could void your authority to operate this equipment.Operation is subject to the following two conditions: 1. is d...

Page 12 - -1. To attach the lower switch housing, connect the plug connector; • Completin g Your Inst al l ation

12 Hunter Fan Company 42501-01 • 10/24/05 9-1. To attach the lower switch housing, connect the plug connector from the motor to the plug connector from the receiver in the lower switch housing assembly. Note: Both plug connectors are polarized and will only fit together one way. Make sure the connec...

Page 13 - off and on and controlling the light and fan speed.; 0 • O p eratin g th e R emot e Control and Mountin g th e Hol der

13 42501-01 • 10/24/05 Hunter Fan Company 10-1. e remote transmitter has individual buttons for turning the fan off and on and controlling the light and fan speed. 10-2. For best operation, start the fan by pressing high, then select your desired speed. 10-3. e light button turns the light on to f...

Page 14 - 1-4. Clean wood finish blades with a furniture polishing cloth.; 1 • O p eratin g and Cleanin g Your C ei lin g Fan

14 Hunter Fan Company 42501-01 • 10/24/05 11-1. Turn on electrical power to the fan.11-2. Ceiling fans work best by blowing air downward (counterclockwise blade rotation) in warm weather to cool the room with a direct breeze. In winter, having the fan draw air upward (clockwise blade rotation) will ...

Page 15 - 2 • Trouble sho otin g; and instructions to balance the fan.

15 42501-01 • 10/24/05 Hunter Fan Company 12 • Trouble sho otin g Problem: Nothing happens; fan does not move. 1. Turn power on, replace fuse, or reset breaker.2. Loosen canopy, check all connections according to the wiring the fan section. 3. Check the plug connection in the switch housing.4. Pull ...