Hunter 42444-01 - Manuals

Hunter 42444-01 – Manual in PDF format online.

Manuals:

Manual

Manual Hunter 42444-01

Summary

Page 2 - Welc om e; Cautions and Warnings

2 42444-01 • 11/01/10 • Hunter Fan Company © 2010 Hunter Fan Company Welc om e Your new Hunter ® ceiling fan is an addition to your home or office that will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and opera...

Page 3 - Step 1 - Choose the Fan Site; • The fan blades are at least 7 feet above the floor and the ceiling is; Checklist for Existing Fan Site; Pre parin g th e Fan Sit e

3 42444-01 • 11/01/10 • Hunter Fan Company 7’ Minimum Blades to Floor 8’ Minimum Ceiling Height 30” From Wall or Nearest Obstruction Step 1 - Choose the Fan Site Proper ceiling fan location and attachment to the building structure are essential for safety, reliable operation, maximum efficiency, and...

Page 4 - Step 2 - Cut the Ceiling Hole; • Installing the

4 42444-01 • 11/01/10 • Hunter Fan Company Pre parin g th e Fan Sit e (c ontinu ed) CAUTION: All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. Steps 2 – 3 Step 4 Step 5 Step 2 - Cut the Ceiling ...

Page 5 - Inst al ler’s Choice and O ptional Ac ce ss orie s; Understanding Mounting and Installer’s Choice

5 42444-01 • 11/01/10 • Hunter Fan Company Inst al ler’s Choice and O ptional Ac ce ss orie s Understanding Mounting and Installer’s Choice ® Hunter’s patented 3-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of three ways, dep...

Page 6 - To install a ceiling fan, be sure you can do the following:; Gathering the Tools; You will need the following tools for installing the fan:; Checking Your Fan Parts; • Gettin g R eady

6 42444-01 • 11/01/10 • Hunter Fan Company To install a ceiling fan, be sure you can do the following: • Locate the ceiling joist or other suitable support in ceiling.• Drill holes for and install wood screws.• Identify and connect electrical wires.• Lift 40 pounds. If you need help installing the f...

Page 7 - • Inst al lin g th e C ei lin g Pl at e

7 42444-01 • 11/01/10 • Hunter Fan Company CAUTION: To avoid possible electrical shock, before installing your fan, disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. If you cannot lock the circuit breakers in the off position, securely fa...

Page 8 - WARNING: Fan may fall if not assembled as directed in these; CAUTION: The adapter has a special coating on the threads. Do; Assemble securely with three low profile screws.; • A ssemblin g and Han g in g th e Fan

8 42444-01 • 11/01/10 • Hunter Fan Company WARNING: Fan may fall if not assembled as directed in these installation instructions. 3-1. Unbundle the wires from the fan.For Standard or Angled mounting:3-2. Insert the downrod through the canopy and canopy trim ring. Feed the wires from the fan through ...

Page 9 - Single Switch Wiring:; • The black wire (ungrounded) from the ceiling to the black; CAUTION: Be sure no bare wire or wire strands are visible after; ceiling plate into the outlet box.; • Wirin g th e Fan

9 42444-01 • 11/01/10 • Hunter Fan Company All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician.Wall switches are not included. Select an acceptable general-use switch in accordance with national an...

Page 10 - WARNING: The slots in the canopy must remain engaged while; Note: Should you need to remove the trim ring, press firmly on; • Inst al lin g th e C anopy and C anopy Trim Rin g

10 42444-01 • 11/01/10 • Hunter Fan Company WARNING: Failure to complete the following steps could cause the fan to fall. Note: It is recommended you use a magnetic tip screwdriver for the following steps. 5-1. Rotate the hanger ball so the tab in the canopy is secure in the hanger ball groove. Note...

Page 11 - WRONG; • A ssemblin g th e Bl ade s

11 42444-01 • 11/01/10 • Hunter Fan Company Our blade assembly enables you to lock the blades in place without tools and to remove the blades easily for cleaning. 6-1. Align the three holes in the blade with the three blade iron posts. 6-2. Using two hands, squeeze the blade and blade iron together ...

Page 12 - . To attach the lower switch housing assembly to the fan, partially

12 42444-01 • 11/01/10 • Hunter Fan Company Note: In compliance with US federal energy regulations, this ceiling fan contains a device that restricts its light output. Exceeding the wattage limit marked on the MAX wattage sticker affixed to the light socket(s) may result in fire hazard or improper o...

Page 13 - Installing the Glass Bowl; -8. Thread the fan pull chain through the grommet hole in the side of

13 42444-01 • 11/01/10 • Hunter Fan Company 7 • Completin g Your Inst al l ation With a Bow l Li g ht Fi xture (Continu ed) Installing the Glass Bowl 7-6. Install candelabra bulbs (60 Watt Maximum) into the sockets.7-7. Thread the light and fan pull chains through the hole in the center of the glass...

Page 14 - Uninstalling the Light Fixture; between the black wire and the red wire.

14 42444-01 • 11/01/10 • Hunter Fan Company 7 • Completin g Your Inst al l ation With or Without a Bow l Li g ht Fi xture (Continu ed) Uninstalling the Light Fixture 7-12. To uninstall the light fixture, first disconnect the plug connectors between the black wire and the red wire. 7-13. Disconnect t...

Page 15 - • O p eratin g and Cleanin g Your C ei lin g Fan

15 42444-01 • 11/01/10 • Hunter Fan Company In warm weather, use downward air flow pattern In cold weather, use upward air flow pattern 8-1. Turn on electrical power to the fan.8-2. The fan pull chain controls power to the fan. The pull chain has four settings in sequence: High, Medium, Low and Off....

Page 16 - enclosed balancing kit to balance the fan.; Problem: Lights shut off suddenly, but fan is still operating; the fan in a location without a dimming control.; • Trouble sho otin g

16 42444-01 • 11/01/10 • Hunter Fan Company Problem: Nothing happens; fan does not move 1. Turn power on, replace fuse, or reset breaker.2. Loosen canopy, check all connections according to the wiring the fan section.3. Check the plug connection in the switch housing.4. Push motor reversing switch f...