Hunter 42426-01 - Manuals

Hunter 42426-01 – Manual in PDF format online.

Manuals:

Manual

Manual Hunter 42426-01

Summary

Page 2 - Cautions and Warnings; READ THIS ENTIRE MANUAL CAREFULLY BEFORE BEGINNING; • To avoid possible electrical shock, before installing your fan,; Welc om e

2 42426-01 • 03/29/10 • Hunter Fan Company © 2010 Hunter Fan Company Your new Hunter ® ceiling fan is an addition to your home or office that will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and operating your ...

Page 3 - Pre parin g th e Fan Sit e; Step 1 - Choose the Fan Site; Choose a fan site where:; Checklist for Existing Fan Site

3 42426-01 • 03/29/10 • Hunter Fan Company Pre parin g th e Fan Sit e 7’ Minimum Blades to Floor 8’ Minimum Ceiling Height 30” From Wall or Nearest Obstruction Step 1 - Choose the Fan Site Proper ceiling fan location and attachment to the building structure are essential for safety, reliable operati...

Page 4 - Step 2 - Cut the Ceiling Hole; • Installing the

4 42426-01 • 03/29/10 • Hunter Fan Company Pre parin g th e Fan Sit e (c ontinu ed) CAUTION: All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. Steps 2 – 3 Step 4 Step 5 Step 2 - Cut the Ceiling ...

Page 5 - Inst al ler’s Choice and O ptional Ac ce ss orie s; Understanding Mounting and Installer’s Choice; To

5 42426-01 • 03/29/10 • Hunter Fan Company Inst al ler’s Choice and O ptional Ac ce ss orie s Understanding Mounting and Installer’s Choice ® Hunter’s patented 3-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of three ways, dep...

Page 6 - To install a ceiling fan, be sure you can do the following:; Gathering the Tools; You will need the following tools for installing the fan:; Checking Your Fan Parts; Installing Multiple Fans?; • Gettin g R eady

6 42426-01 • 03/29/10 • Hunter Fan Company To install a ceiling fan, be sure you can do the following: • Locate the ceiling joist or other suitable support in ceiling.• Drill holes for and install wood screws.• Identify and connect electrical wires.• Lift 40 pounds. If you need help installing the f...

Page 7 - • Inst al lin g th e C ei lin g Pl at e

7 42426-01 • 03/29/10 • Hunter Fan Company CAUTION: To avoid possible electrical shock, before installing your fan, disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. If you cannot lock the circuit breakers in the off position, securely fa...

Page 8 - For Standard or Angled mounting:; -2. Insert the downrod through the canopy and canopy trim ring.; For low profile mounting, the downrod is replaced with the; • A ssemblin g and Han g in g th e Fan

8 42426-01 • 03/29/10 • Hunter Fan Company WARNING: Fan may fall if not assembled as directed in these installation instructions. 3-1. Unbundle the wires from the fan. For Standard or Angled mounting: 3-2. Insert the downrod through the canopy and canopy trim ring. Feed the wires from the fan throug...

Page 9 - Setting DIP switches; • Settin g th e R emot e Transmitt er and R e ceiver

9 42426-01 • 03/29/10 • Hunter Fan Company CAUTION: The remote control device complies with part 15 of the FCC rules. Changes or modifications not expressly approved by Hunter Fan Company could void your authority to operate this equipment.Operation is subject to the following two conditions: 1. Thi...

Page 10 - • Wirin g th e Fan

10 42426-01 • 03/29/10 • Hunter Fan Company 5 • Wirin g th e Fan All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. 5-1. Make sure the power is still off.5-2. To connect the wires, hold the bare ...

Page 11 - • Inst al lin g th e C anopy and C anopy Trim Rin g

11 42426-01 • 03/29/10 • Hunter Fan Company WARNING: Failure to complete the following steps could cause the fan to fall. Note: It is recommended you use a magnetic tip screwdriver for the following steps. 6-1. Rotate the hanger ball so the tab in the canopy is secure in the hanger ball groove. Note...

Page 12 - • A ssemblin g th e Bl ade s

12 42426-01 • 03/29/10 • Hunter Fan Company Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan).7-1. Your fan may include blade grommets. If your fan has grommets, insert them by hand into the holes on the blades. 7-2. Attach each blade to a blade iron using t...

Page 13 - -3. Turn the housing counterclockwise until the housing assembly; -4. To attach the lower switch housing, connect the upper plug; • Completin g Your Inst al l ation With a Multi St aked Li g ht Fi xture

13 42426-01 • 03/29/10 • Hunter Fan Company Plug Connector Detail WARNING: Use only the light fixture supplied with this fan model. 8-1. To attach the upper switch housing, partially install two #6-32 x 3/8” housing assembly screws into the switch housing mounting plate. 8-2. Align the keyhole slots...

Page 14 - Glass shade style and number of lights may vary.; In compliance with US federal energy regulations this

14 42426-01 • 03/29/10 • Hunter Fan Company Note: Glass shade style and number of lights may vary. 8-6. To install each shade, first loosen the three thumbscrews.8-7. Raise the shade to the light fixture. Tighten the thumbscrews securely. 8-8. Install B10 candelabra-based light bulbs (60 Watt maximu...

Page 15 - • O p eratin g th e R emot e Control and Mountin g th e Hol der

15 42426-01 • 03/29/10 • Hunter Fan Company 9-1. The remote has individual buttons for setting fan speed and light intensity. Refer to the figure on the right. Note: For best operation, start the fan by pressing high, then select your desired speed. 9-2. The light button turns the light. Push the li...

Page 16 - • The chain uses a breakaway connector that separates if the; To Change Airflow Direction; 0 • O p eratin g and Cleanin g Your C ei lin g Fan

16 42426-01 • 03/29/10 • Hunter Fan Company In warm weather , use downward air flow pattern In cold weather , use upward air flow pattern 10-1. Turn on electrical power to the fan.10-2. The fan pull chain controls power to the fan. The pull chain has four settings in sequence: High, Medium, Low and ...

Page 17 - 1 • Trouble sho otin g

17 42426-01 • 03/29/10 • Hunter Fan Company Problem: Nothing happens; fan does not move 1. Turn power on, replace fuse, or reset breaker.2. Loosen canopy, check all connections according to the wiring the fan section. 3. Check the plug connection in the switch housing.4. Push motor reversing switch ...