Hunter 21958 - Manuals - manualsarea.com

Page 2 - Welc om e; Your new Hunter; Cautions and Warnings; READ THIS ENTIRE MANUAL CAREFULLY BEFORE BEGINNING; • To avoid possible electrical shock, before installing your fan,

2 42863-01 • 06/22/11 • Hunter Fan Company © 2011 Hunter Fan Company Welc om e Your new Hunter ® ceiling fan is an addition to your home or office that will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and opera...

Page 3 - Step 1 - Choose the Fan Site; Choose a fan site where:; Checklist for Existing Fan Site; Pre parin g th e Fan Sit e

3 42863-01 • 06/22/11 • Hunter Fan Company 7’ Minimum Blades to Floor 8’ Minimum Ceiling Height 30” From Wall or Nearest Obstruction Step 1 - Choose the Fan Site Proper ceiling fan location and attachment to the building structure are essential for safety, reliable operation, maximum efficiency, and...

Page 4 - Step 2 - Cut the Ceiling Hole; • Installing the

4 42863-01 • 06/22/11 • Hunter Fan Company Pre parin g th e Fan Sit e (c ontinu ed) CAUTION: All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. Steps 2 – 3 Step 4 Step 5 Step 2 - Cut the Ceiling ...

Page 5 - Inst al ler’s Choice and O ptional Ac ce ss orie s; Understanding Mounting and Installer’s Choice; To reduce the risk of personal

5 42863-01 • 06/22/11 • Hunter Fan Company Inst al ler’s Choice and O ptional Ac ce ss orie s Understanding Mounting and Installer’s Choice ® Hunter’s patented 2-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of two ways, depen...

Page 6 - To install a ceiling fan, be sure you can do the following:; Gathering the Tools; You will need the following tools for installing the fan:; Checking Your Fan Parts; Installing Multiple Fans?; • Gettin g R eady

6 42863-01 • 06/22/11 • Hunter Fan Company To install a ceiling fan, be sure you can do the following: • Locate the ceiling joist or other suitable support in ceiling.• Drill holes for and install wood screws.• Identify and connect electrical wires.• Lift 40 pounds. If you need help installing the f...

Page 7 - • Inst al lin g th e C ei lin g Pl at e

7 42863-01 • 06/22/11 • Hunter Fan Company CAUTION: To avoid possible electrical shock, before installing your fan, disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. If you cannot lock the circuit breakers in the off position, securely fa...

Page 8 - For Standard or Angled mounting:; • A ssemblin g and Han g in g th e Fan

8 42863-01 • 06/22/11 • Hunter Fan Company WARNING: Fan may fall if not assembled as directed in these installation instructions. 3-1. Unbundle the wires from the fan. For Standard or Angled mounting: 3-2. To assemble fan to hang down from a flat or angled ceiling, insert the downrod through the can...

Page 9 - Dual Switch Wiring:; • Wirin g th e Fan

9 42863-01 • 06/22/11 • Hunter Fan Company Dual Switch Wiring Wire Connector All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. Wall switches are not included. Select an acceptable general-use sw...

Page 10 - • Inst al lin g th e C anopy

10 42863-01 • 06/22/11 • Hunter Fan Company 5-1. Partially install two canopy screws (about 2 full turns) in the hanger bracket. 5-2. Raise the canopy over the hanger bracket. Align partially installed screws with key slots in canopy. 5-3. Twist canopy counterclockwise to secure.5-4. Install third c...

Page 12 - • Completin g Your Inst al l ation

12 42863-01 • 06/22/11 • Hunter Fan Company 7-2. Thread the plug connector from the mounting plate through the gasket. Partially install the gasket to the mounting plate with the two screws. 7-3. Place the upper switch housing over the two screws and turn counterclockwise so that the screws fit secu...

Page 13 - To Change Airflow Direction; • The chain uses a breakaway connector that separates if the; • O p eratin g and Cleanin g Your C ei lin g Fan

13 42863-01 • 06/22/11 • Hunter Fan Company To Change Airflow Direction Turn the fan off and let it come to a complete stop. Pull the reversing switch pull chain. Restart fan. In warm weather , use downward air flow pattern In cold weather , use upward air flow pattern 8-1. Turn on electrical power ...

Page 14 - Hunter fans have the power to cut your cooling costs up to 40%.; Beat the High Cost of Cooling

14 42863-01 • 06/22/11 • Hunter Fan Company Hunter fans have the power to cut your cooling costs up to 40%. Beat the High Cost of Cooling The air movement created by a Hunter ceiling fan lets you set your thermostat higher and still stay comfortable. Every degree you raise the thermostat saves up to...

Page 15 - • Trouble sho otin g

15 42863-01 • 06/22/11 • Hunter Fan Company Problem: Nothing happens; fan does not move. 1. Turn power on, replace fuse, or reset breaker.2. Loosen canopy, check all connections according to the wiring the fan section. 3. Check the plug connection in the switch housing.4. Pull the pull chain to ensu...