Hunter 21322 - Manuals - manualsarea.com

Page 2 - Your new Hunter; Cautions and Warnings; READ THIS ENTIRE MANUAL CAREFULLY BEFORE BEGINNING; • To avoid possible electrical shock, before installing your fan,; Welc om e

2 42857-01 • 12/04/08 • Hunter Fan Company Table Of Contents 1 • Getting Ready . . . . . . . . . . . . . . . . . . . . . . 4 2 • Installing the Hanger Bracket . . . . . . . 5 3 • Assembling and Hanging the Fan . . . 6 4 •Wiring the Fan . . . . . . . . . . . . . . . . . . . . . . 7 5 • Installing the...

Page 3 - Mountin g and O ptional Ac ce ss orie s; Understanding Mounting; To reduce the risk of

3 42857-01 • 12/04/08 • Hunter Fan Company Mountin g and O ptional Ac ce ss orie s Understanding Mounting Hunter’s patented mounting system provides you maximum ease in installing your fan. This fan was designed to be mounted only on flat ceilings and can be used on ceilings less than 8 feet high. C...

Page 4 - To install a ceiling fan, be sure you can do the following:; Gathering the Tools; You will need the following tools for installing the fan:; Checking Your Fan Parts; Installing Multiple Fans?; • Gettin g R eady

4 42857-01 • 12/04/08 • Hunter Fan Company To install a ceiling fan, be sure you can do the following: • Locate the ceiling joist or other suitable support in ceiling.• Drill holes for and install wood screws.• Identify and connect electrical wires.• Lift 40 pounds. If you need help installing the f...

Page 5 - • Inst al lin g th e Han ger Bracket

5 42857-01 • 12/04/08 • Hunter Fan Company 2 • Inst al lin g th e Han ger Bracket CAUTION: To avoid possible electrical shock, before installing your fan, disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. If you cannot lock the circuit br...

Page 6 - • A ssemblin g and Han g in g th e Fan; to the square faces out of the large opening in the metal bracket.; -3. Install two locking screws through the holes in the side of the

6 42857-01 • 12/04/08 • Hunter Fan Company 3 • A ssemblin g and Han g in g th e Fan Step 3-2 #8-32 x 1” Screw Green Ground Wire 3-1. Position the square hanger so that the green ground wire attached to the square faces out of the large opening in the metal bracket. 3-2. Holding the wires out of the ...

Page 7 - •Wirin g th e Fan

7 42857-01 • 12/04/08 • Hunter Fan Company 4 •Wirin g th e Fan All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. 4-1. Disconnect the power by turning off the circuit breakers to the outlet box a...

Page 8 - • Inst al lin g th e Motor Housin g; housing and into the hanger bracket. Securely tighten all screws.

8 42857-01 • 12/04/08 • Hunter Fan Company 5 • Inst al lin g th e Motor Housin g 5-1. Place the fan housing over the motor. 5-2. Align the keyholes in the fan housing with the two partially installed canopy screws in the hanger bracket. Rotate the fan housing to situate the screws in the narrow ends...

Page 9 - • A ssemblin g th e Bl ade s

9 42857-01 • 12/04/08 • Hunter Fan Company Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan).6-1. Your fan may include blade grommets. If your fan has grommets, insert them by hand into the holes on the blades. 6-2. Attach each blade to a blade iron using th...

Page 10 - assembly screws into the switch housing mounting plate.; -5 . If you want to install the light fixture

10 42857-01 • 12/04/08 • Hunter Fan Company Your Hunter fan comes with an integrated light fixture assembly and an optional switch housing cap and plug button. This feature gives you the option of installing the fan with OR without the included light fixture. The steps below direct you whether or no...

Page 12 - Installing the Glass Bowl; -14. Place the cover plate up against the

12 42857-01 • 12/04/08 • Hunter Fan Company Installing the Glass Bowl 7-8. First install B10 candelabra bulbs (60 Watt Maximum) into the sockets. 7-9. If the fandangle is attached to the extra pull chain, remove it now.7-10. Attach the extra pull chain (included) to the fan pull chain using the plas...

Page 13 - Uninstalling the Light Fixture; between the black wire and the black/white wire.

13 42857-01 • 12/04/08 • Hunter Fan Company 7 • Completin g Your Inst al l ation With or Without a Bow l Li g ht Fi xture (Continu ed) Uninstalling the Light Fixture 7-16. To uninstall the light fixture, first disconnect the plug connectors between the black wire and the black/white wire. 7-17. Disc...

Page 14 - • The chain uses a breakaway connector that separates if the; • O p eratin g and Cleanin g Your C ei lin g Fan

14 42857-01 • 12/04/08 • Hunter Fan Company In warm weather , use downward air flow pattern In cold weather , use upward air flow pattern 8-1. Turn on electrical power to the fan.8-2. The fan pull chain controls power to the fan. The pull chain has four settings in sequence: High, Medium, Low, and O...

Page 15 - Problem: Lights dim when turned on or do not turn on; Check to make sure the wattage and type of light bulbs installed; • Trouble sho otin g

15 42857-01 • 12/04/08 • Hunter Fan Company Problem: Nothing happens; fan does not move. 1. Turn power on, replace fuse, or reset breaker.2. Loosen canopy, check all connections according to the wiring the fan section. 3. Check the plug connection in the switch housing.4. Push motor reversing switch...