Page 3 - WARNING
01/07 ID# M6611043 3 Owner must ensure that all players know and follow these rules for safe operation of the system. WARNING • DO NOT HANG on the rim or any part of the system including backboard, support braces or net. • During play, especially when performing dunk type activities, keep player's f...
Page 4 - MOVING SYSTEM; SAFETY INSTRUCTIONS; sections to separate during play and/or transport of the system.
4 ID# M6611043 01/07 2 2 1 3 TO ADJUST BACKBOARD: 1. While holding handle, remove pin. 2. Move elevator up or down to desired height. 3. Replace pin full length to lock system at desired height. 511679 05/05 1 2 4 3 MOVING SYSTEM Adjust basketball backboardheight to lowest position. While holding po...
Page 5 - NOTICE TO ASSEMBLERS; inspect for loose small parts.
01/07 ID# M6611043 5 IMPORTANT! Remove all contents from boxes. Be sure to check inside pole sections; hardware and additional parts are packed inside. NOTICE TO ASSEMBLERS Adult Assembly Required. Dispose of ALL packaging materials promptly. As with all products, periodically inspect for loose smal...
Page 7 - PARTS LIST - See Hardware Identifier; NOTE; Hardware kit is designed for more than one
01/07 ID# M6611043 7 Item Qty. Part No. Description 1 1 266000 Base 2 2 908184 Strut, Pole to Base 3 1 804833 Exacta Height Assembly 4 1 FR908006 Top Pole Section 5 1 FR918107 Middle Pole Section 6 1 FR908179 Bottom Pole Section 7 2 108183 Wheel Bracket 8 2 266200 Wheel, 4 Inch 9 2 108182 Rod, Axle ...
Page 11 - TOOLS REQUIRED FOR THIS SECTION; SECTION A: ASSEMBLE THE BASE; and Sockets
01/07 ID# M6611043 11 TOOLS REQUIRED FOR THIS SECTION SECTION A: ASSEMBLE THE BASE And/Or: This is what your system will look like when you’ve finishedthis section. 1/2” 9/16” (2 each) Wrenches 1/2” and 9/16” (2) Socket Wrenches and Sockets Extension Phillips-Head Screwdriver
Page 12 - Check the following pre-assembled handle areas for tightness:
12 ID# M6611043 01/07 Check the following pre-assembled handle areas for tightness: Screw P/N 204803, Nut P/N 203100, Carriage Bolts P/N 203103. Carriage Bolt P/N 203103 Nut P/N 203100 Nut P/N 203100 Handle, RightP/N 204856 Handle, LeftP/N 204855 Screw P/N 204803 Carriage Bolt P/N 203103 Height Adju...
Page 13 - • Support Pushnut/Axle
01/07 ID# M6611043 13 2. Complete wheel assembly as shown in Figure A. Secure wheel bracket (7), wheel (8), axle (9), and pushnuts (13) to the tank (1) with a single bolt (18) and washer (51). Repeat procedure for opposite wheel. 7 8 9 13 13 18 1 Fig. A Do not install bothbolts into the wheelassembl...
Page 14 - WOOD SCRAP; HOLE; Identify pole sections.
14 ID# M6611043 01/07 6 5 4 4. WOOD SCRAP (NOT SUPPLIED) 5 4 While maintaining alignment, bounce middle pole section (5) into top section (4)using a wood scrap as shown until the top pole no longer moves toward the poleidentification sticker on the middle pole. Identification Sticker Align dimple of...
Page 17 - DO NOT TIGHTEN
01/07 ID# M6611043 17 7 48 8. Rotate non-secured ends of tank struts (2) outward to mounting holes in tank asshown. Secure ends of tank struts (2) to wheel bracket (7), as shown. Repeat foropposite side. 2 2 14 47 9. Secure cover (28) to tank struts (2) usingbolts (47) and nuts (14) as shown. 28 TWO...
Page 20 - SECTION B: ATTACH THE BACKBOARD; Phillips-Head Screwdriver; Upper Elevator tube; Identify elevator tubes.; TOWARDS BOARD
20 ID# M6611043 01/07 TOOLS REQUIRED FOR THIS SECTION SECTION B: ATTACH THE BACKBOARD Phillips-Head Screwdriver This is what your system will look like whenyou’ve finished this section. Wrenches (2 each) 1/2”, 9/16”, and 3/4” (2) Socket Wrenches and Sockets And/Or 1/2” 9/16” Extension 3/4” Sawhorse ...
Page 22 - COMPLETED ASSEMBLY
22 ID# M6611043 01/07 Support pole on sawhorse. Attach triangle plates (37) and elevator tubes (35 & 32)to top pole (4) using bolts (40 & 29) and nuts (31). Install pole cap (38). 2. 35 31 29 35 31 31 30 30 40 37 37 32 4 USE CAUTION; ELEVATORASSEMBLY IS HEAVY. TWO PEOPLE REQUIRED FORTHIS PRO...
Page 23 - make sure
01/07 ID# M6611043 23 3. Install handle assembly to lower elevator tubes (32) using bolt (29), spacers (36),and nut (31) as shown. 29 35 31 35 36 36 4 Before going on tonext step, make sure adjustable systemassembly is set to the10’ (3.05 m) setting. NOTE:
Page 26 - Install Slam Jam Rim to Backboard
26 ID# M6611043 01/07 8. 56 58 59 54 55 Install Slam Jam Rim to Backboard 34 57 55 59 58 A B C D E A Fit rim (34) securely into bracket (54) as shown. Allow T-bolt (55) to slip through centerhole in rim (34). B Install reinforcement bracket (56) onto T-bolt (55) as shown. C Install spring (57) onto ...
Page 27 - SAND; OUTSIDE VIEW
01/07 ID# M6611043 27 10. Roll completed assembly to desired position. Filltank with water (approx. 34 gallons (129 Liters))or sand (approx. 300 lbs. (136 kg)) and rotate thecap (41) into base (1). ADD TWO GALLONS (7.6LITERS) OF NON-TOXICANTIFREEZE IN SUB-FREEZING CLIMATES. CAUTION! DO NOT LEAVEASSE...
Page 28 - SECTION C: APPLY HEIGHT AND MOVING LABEL & HEIGHT ADJUSTMENT; DO NOT ALLOW; Peel protective
28 ID# M6611043 01/07 1. Apply height adjustment and moving label (46) to front of pole as shown. 2. A. While holding handle, remove pin (24). B. Move elevator up or down to desired height. C. Replace pin (24) full length to lock system at desired height. SECTION C: APPLY HEIGHT AND MOVING LABEL &am...
Page 31 - Manual del Propietario del Sistema; Système portable - Manuel de; FRANÇAIS; Assemblage exclusivement réservé à un adulte.
31 01/07 ID# M6611043 Gebrauchsanleitung für tragbare Systeme Kundendienstzentrale • N53 W24700 South Corporate Circle • Sussex, WI 53089 • U.S.A. Manual del Propietario del Sistema Portátil Centro de Servicio al Cliente • N53 W24700 South Corporate Circle • Sussex, WI 53089 • EE.UU. Système portabl...
Page 32 - ARENA
32 ID# M6611043 01/07 OUTILS ET MATÉRIEL REQUIS: • Deux clés et/ou clés à douilles et deux douilles (douilles longuesrecommandées). ET/OU • Petites et grandes clés anglaises OUTILS ET MATÉRIEL FACULTATIFS: 7/16" 1/2" 9/16" 3/4" 7/16" 1/2" 9/16" 3/4" • Deux (2) adultes...
Page 33 - VORBEREITENDE MASSNAHMEN
01/07 ID# M6611043 33 AVANT DE COMMENCER! VORBEREITENDE MASSNAHMEN ¡ANTES DE COMENZAR! Apprenez à connaître les composants de base de votre système de basket-ball..... Machen Sie sich mit den wichtigsten Teilen Ihres Basketballsystems vertraut… Conozca las piezas básicas de su sistema de baloncesto…...
Page 34 - AV; ACHTUNG; ADVERTENCIA
34 ID# M6611043 01/07 Le propriétaire doit s'assurer que tous les joueurs connaissent et suivent ces règles d'utilisation sûre du système. AV ERTISSEMENT • NE VOUS SUSPENDEZ P AS sur le cerceau ou sur une autre partie du système, y compris le panneau, les supports ou le filet. • Durant le jeu, en pa...
Page 35 - DÉPLACEMENT DU SYSTÈME; TRANSPORTSYSTEM; CONSIGNES DE SÉCURITÉ; SICHERHEITSHINWEISE; INSTRUCCIONES DE SEGURIDAD
01/07 ID# M6611043 35 2 2 1 3 POUR AJUSTER LE PANNEAU : 1. Tout en tenant la poignée, retirez la goupille. 2. Montez ou abaissez le système élévateur jusqu'à la hauteur voulue. 3. Remettez la goupille à sa place en l'enfonçant à fond, pour bloquer le système à la hauteur désirée. FR511679 05/05 1 2 ...
Page 36 - NE RETOURNEZ PAS au magasin !; Gehen Sie NICHT zum Laden zurück!; ¡NO regrese a la tienda!
36 ID# M6611043 01/07 Des questions ou des pièces manquantes ? Appelez le numéro du service clientèle (NUMÉRO GRATUIT) qui figure en première page! STOP! STOP! STOP! NE RETOURNEZ PAS au magasin ! Fragen oder fehlende Teile? Rufen Sie die GEBÜHRENFREIE Telefonnummer (in den USA und Kanada) auf der Vo...
Page 37 - Notbehelfsmaßnahmen gegriffen werden.; AVISO PARA LAS PERSONAS QUE REALIZAN EL MONTAJE; las piezas pequeñas estén firmemente apretadas.
01/07 ID# M6611043 37 AVIS AUX PERSONNES CHARGÉES DU MONTAGE Assemblage exclusivement réservé à un adulte. Jetez TOUT le matériel d'emballage dans les plus brefs délais. Comme pour tous les produits pour enfants, inspectez périodiquement le serrage des pièces de petite taille. Une fois assemblé, l'e...
Page 38 - LISTE DES PIÈCES - Voir légende; REMARQUE; Le kit de visserie est conçu pour plus d’un
38 ID# M6611043 01/07 LISTE DES PIÈCES - Voir légende Légende Qté No. de réf. Description 1 1 266000 Socle 2 2 908184 Contrefiche, poteau/socle 3 1 804833 Ensemble hauteur Exacta 4 1 FR908006 Section de poteau supérieure 5 1 FR918107 Section de poteau centrale 6 1 FR908179 Section de poteau inférieu...
Page 39 - TEILELISTE - Siehe Teileschlüssel; Die beiliegenden Befestigungsteile sind für
01/07 ID# M6611043 39 TEILELISTE - Siehe Teileschlüssel Nr. Anz. Teilenummer Beschreibung 1 1 266000 Sockel 2 2 908184 Verstrebung, Stange zu Sockel 3 1 804833 Exacta-Höheneinstellkomponenten 4 1 FR908006 Oberes Stangenteil 5 1 FR918107 Mittleres Stangenteil 6 1 FR908179 Unteres Stangenteil 7 2 1081...
Page 40 - LISTA DE PIEZAS - Vea el identificador de herraje; El juego de herraje está diseñado para más
40 ID# M6611043 01/07 LISTA DE PIEZAS - Vea el identificador de herraje NOTA: El juego de herraje está diseñado para más de un estilo de sistemas de baloncesto. No se usará todo el herraje. Artículo Cant. Pieza N.º Descripción 1 1 266000 Base 2 2 908184 Puntal, poste a base 3 1 804833 Conjunto Exact...
Page 44 - SECTION A: MONTAGE DU SOCLE
44 ID# M6611043 01/07 OUTILS REQUIS POUR CETTE SECTION FÜR DIESEN BAUABSCHNITT BENÖTIGTES WERKZEUG HERRAMIENTAS REQUERIDAS PARA ESTA SECCIÓN SECTION A: MONTAGE DU SOCLE BAUABSCHNITT A: ZUSAMMENBAU DES SOCKELS SECCIÓN A: MONTAJE DE LA BASE Voici à quoi ressemblera votre système lorsquevous en aurez f...
Page 55 - OUTILS REQUIS POUR CETTE SECTION
01/07 ID# M6611043 55 SECTION B: ATTACHEZ LE PANNEAU BAUABSCHNITT B: ANBRINGEN DER KORBWAND SECCIÓN B: CONECTE EL RESPALDO Voici à quoi ressemblera votre système lorsque vous enaurez fini avec cette section. So sieht das System aus, wenn Sie mit diesemBauabschnitt fertig sind. Así es como se verá su...
Page 64 - VUE EXTÉRIEURE / AUSSENANSICHT / VISTA EXTERNA; Sable
64 ID# M6611043 01/07 10. 9. Faites rouler l'ensemble jusqu'à la position désirée.Remplissez le réservoir d'eau (129 litres environ) ou de sable(136 kg environ) et installez le bouchon (41). Den fertigen Aufbau an die gewünschte Position rollen. DenTank mit Wasser (ca. 129 l [34 US-Gallonen]) oder S...