Huffy 1051 - Manuals

Huffy 1051 – Manual in PDF format online.

Manuals:

Manual Huffy 1051

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13

Summary

Page 4 - WARNING; ASSEMBLING THE McCALL'S REBOUNDER

4 P/N 211670 12/02 12/02 P/N 211670 Tip base on it's side and install casters (2) to the bottom of base (1) as shown using bolts (22), lockwashers (31) and nuts (27). 1. 22 2. Attach collar (8) to outer pole (5) as shown with T-Screw bolt (7). Tighten completely. 7 8 2 5 NOTE: THE T-SCREW (7) IS USE...

Page 7 - to fully secure winch assembly to collar bracket as shown.; Released; Locked

12/02 P/N 211670 7 7. Attach winch assembly (9, 10 & 11) to collar bracket using nut (25) and lockwasher (30) as shown [Winch components (9, 10 & 11) are preassembled]. 2 1 12 12 11 11 10 10 9 25 9 IMPORTANT: CORD MUST PASS BEHIND SPACER AS SHOWN! 8. Release the lever and unwind cable and at...

Page 11 - Tighten completely

12/02 P/N 211670 11 Slide Hopper assembly (15) over the top of the pole (5) tighten bolts indicated. 13. 15 Tighten completely 9/16" wrench needed 5 THE HOPPER IS HEAVY! TWO PERSON MINIMUM REQUIRED FOR THIS PROCEDURE. NOT FOLLOWING RECOMMENDATION MAY RESULT IN BODILY INJURY. DO NOT LEAVE ASSEMBL...

Huffy Manuals