Huawei V100R001 - Manuals

1 1 Connecting the Cables and Getting Started Thank you for purchasing the HUAWEI HG533 Home Gateway (hereinafter referred to as the HG533). You can go online using the ADSL, LAN, and data card services. However, you can only use one type of service at one time. The default way of going online is us...

2 1. Power adapter 2. Desktop Computer 3. Telephone 4. Splitter 5. Telephone wall jack 6. Laptop Computer a. MODEM interface b. PHONE interface c. LINE interface 1.1.2 Getting started After connecting the cables, press the On/Off button on the side panel to power on the HG533. The ADSL indicator lig...

5 2 Setting Network-Access Parameters 2.1 Logging In to Web-based Configuration Utility The HG533 provides an easy-to-use web-based configuration utility. You can view and set the parameters of the HG533 through this utility. The following example uses a computer running the Windows XP operating sys...

6 selected, clear Use the proxy server for your LAN , and then click OK . 4. In Internet Options window, click OK to close the window. Step 3 Launch a browser on your computer. Enter http://192.168.1.1 in the address box, and press Enter . Step 4 On the login page, enter your user name and password....

7 Step 1 Verify the HG533 and the PC have connected properly, and the PC has obtained the IP address. Step 2 Log in to the web-based configuration utility of the HG533. Step 3 Enable the embedded dial-up function. 1. In the navigation tree on the left of the web-based configuration utility, choose B...

9 You need to perform the preceding operations only once for creating a network connection. After the network connection is created, to access the network, double-click the icon for the dial-up connection, and then click Connect in the displayed dialog box. 2.3 Setting the parameters When Accessing ...

14 3 Accessing the Network Wirelessly 3.1 Setting Up a Wireless Connection by Pressing Buttons The HG533 supports the Wi-Fi Protected Setup (WPS) function. If your network adapter also supports the WPS function, you can use the WPS function to set up a wireless connection between your PC and the HG5...

18 4 Configuring the Commonly Used Functions 4.1 Enabling or Disabling the Wireless Network Function You can choose both of the following methods to enable or disable the wireless network function:  Enable or disable the wireless network function by press button  Enable or disable the wireless net...

19 The WLAN indicator turns on indicates that the wireless network function is enabled. 4.2 Using the Home Storage Function After a portable storage device is connected to the USB port on the rear panel of the HG533, you can configure the HG533 through the samba service to access the portable storag...

20 1. Choose Start > Run on your computer to display the Run dialog box. 2. Enter \\192.168.1.1\usb1 in the Open text box and click OK to display Connecting to 192.168.1.1 dialog box. 3. Enter the user name and the password that you set for logging in to the samba server and then click Login . Af...

22 5 Maintenance Guide 5.1 Changing the Administrator Password Used for Logging in to the Web-based Configuration Utility For safety reasons or to make the password easy to remember, you can change the administrator password for login after logging in to the web-based configuration utility. To chang...

25 To log in to the web-based configuration utility after you change the IP address successfully, you need to launch the Internet Explorer, and then enter the new IP address in the address bar. Ensure that the IP address of the computer is in the same network segment as that of the HG533 so that the...

26 6 FAQs How can I quickly enable or disable the wireless network function? Press and hold the WLAN button for over one second, and then release the button to enable or disable the wireless network function. The WLAN indicator shows whether the wireless network function is enabled. How can I quickl...

30 7 Appendix 7.1 Indicators Indicator Status Description Power Steady on The HG533 is powered on. Off The HG533 is powered off. ADSL Blinking The HG533 is being activated through ADSL. Steady on The HG533 is activated through ADSL. Off  The HG533 is powered off.  The HG533 is activated through WA...

32 Indicator Status Description LAN1 ~ LAN4 Blinking Data is being transmitted through the Ethernet interface. Steady on The Ethernet connection is set up, but no data is being transmitted. Off The Ethernet connection is not set up. USB Blinking  The HG533 is being activated through Data card.  Da...

33 No. Interface or Button Description 1 WPS It is used to set up a wireless connection between the HG533 and a wireless terminal easily and safely. 2 WLAN It is used to enable or disable wireless network function quickly. 3 On/Off It is the power switch and is used to power on or power off the HG53...

34 Parameter Setting Wireless network function Enable 7.4 Technical Specifications Item Specification Ambient temperature for operation 0°C to 40°C (32°F to 104°F) Ambient humidity for operation 5% to 95%, non-condensing Dimensions (L × W × H) 143 mm × 186 mm× 38 mm Weight About 250 g Standards ADSL...