Page 7 - Installing the USIM/SIM Card
3. SIM/USIM Card Slot Holds the Subscriber Identity Module/UMTS subscriber identity module (SIM/USIM) card. Preparing the E219 Requirements for the Computer To use the E219, the computer must meet the following requirements:• USB Type A Receptacle, Compatible with USB 2.0 Full Speed• Windows 2000 SP...
Page 8 - Connecting the E219 with a PC
Connecting the E219 with a PC Note: First, power on the computer. Then connect the E219 with the computer. Otherwise, the E219 cannot be installed normally.The following figure is the sketch map of the data cable. 1 Auxiliary USB data cable 2 Main USB data cable 3 Mini-USB connector 1. Plug the mini...
Page 10 - Area with Inflammables and Explosives; DiGi Internet
Safety Information Read the safety information carefully to ensure the correct and safe use of your wireless device. Interference Do not use your wireless device if using the device is prohibited or when it cause danger or interference with electric devices. Medical Device • Do not use your wireless...
Page 11 - Acronyms and Abbreviations
• Area indicated with the "Explosives" sign• Area indicated with the "Power off bi-direction wireless equipment" sign• Area where you are generally suggested to stop the engine of a vehicle Traffic Security • Observe local laws and regulations while using the wireless device. To prev...
Page 12 - FAQ; What should I do if I cannot access the Internet?
WEEE Approval The wireless device complies with the essential requirements and other relevant provisions of the Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE Directive). RoHS Approval The wireless device complies with the restriction of the use of certain hazardous substances ...
Page 14 - Regulatory Information; Connection Profile Settings
Failure to observe these instructions could result in your RF exposure exceeding the relevant guideline limits. Regulatory Information The following approvals and notices apply in specific regions as noted. CE Approval (European Union) The wireless device is approved to be used in the member states ...
Page 16 - Software Manual; Choosing a Device
Software Manual Entering the PIN Code When the PIN Verification is enabled, you need to enter the correct PIN code to use the network-related functions.1. Choose Tools > PIN Operations > Enter PIN 2. Enter the correct PIN code3. Click OK to complete the verification Note: If you enter the wron...
Page 17 - Contents; Settings and Information Query; PIN Operations
Contents 1 Description of the Terminal Management GUI........................................... 1 Launching the Terminal Management...................................................... 1 Interface Overview................................................................................... 1 2 Inter...
Page 19 - Interface Overview
Description of the Terminal Management GUI Launching the Terminal Management To launch the program, double-click the shortcut icon of the Terminal Management on the desktop. Note: • When you are required to enter the Personal Identification Number (PIN) code, enter the correct PIN and click OK. If y...
Page 20 - Internet Services; Accessing the Internet
Status Information The following table lists the status information. Status Information Description Network signal Indicates the signal strength of the network Network information Displays the profile of the current network Network connection The information of the network connection: d e t c e n n ...