Page 2 - QuickSpecs; Overview; LFF chassis - Front View; Quick removal access panel; Rear View; Embedded 2x 1GbE Adapter; Optional; iLO Management Port
QuickSpecs HPE ProLiant DL160 Gen10 Server Overview Page 2 4 LFF chassis - Front View 1. Quick removal access panel 6. NIC status LED 2. Serial no. label pull tab 7. Health LED 3. iLO Service Port 8. Power On/Standby button and system power LED 4. USB 3.0 Port 9. 4 SAS/SATA/SSD drive bays 5. UID but...
Page 3 - SFF chassis – with optional 2
QuickSpecs HPE ProLiant DL160 Gen10 Server Overview Page 3 8SFF chassis – with optional 2 nd CPU - Internal View 1 Standard single rotor hot swap fans 1 CPU – 3 standard fans Optional: 2 CPUs – 6 standard fans (redundant fan shown) 11 MicroSD card slot 2 Optional: Smart Storage Battery (No battery s...
Page 4 - U rack; Chassis Types; Standard – fan types included
QuickSpecs HPE ProLiant DL160 Gen10 Server Overview Page 4 Platform Information Form Factor 1U rack Chassis Types 8 SFF 4 LFF System Fans Standard – fan types included Non-Redundant 1P Model 3 fans 2P Model 6 fans NOTE: The second processor option kit contains 3 additional fans
Page 5 - Standard Features; Processors – Up to 2 of the following depending on model.; Memory; One of the following depending on model
QuickSpecs HPE ProLiant DL160 Gen10 Server Standard Features Page 5 Processors – Up to 2 of the following depending on model. NOTE: For more information regarding Intel Xeon processors, please see the following http://www.intel.com/xeon Intel Xeon Models CPU Frequency Cores L3 Cache Power UPI DDR4 M...
Page 6 - Flexible LOM; Storage Controllers
QuickSpecs HPE ProLiant DL160 Gen10 Server Standard Features Page 6 Expansion Slots FlexibleLOM Riser Slots # Technology Bus Width Connector Width Slot Form Factor Notes 1 PCIe 3.0 X8 X8 Flexible LOM Proc 1 2 PCIe 3.0 X8 X8 Half-height, half-length slot Proc 1 NOTE: Bus Width Indicates the number of...
Page 7 - the server is powered.
QuickSpecs HPE ProLiant DL160 Gen10 Server Standard Features Page 7 Internal Storage Devices Hard Drives None ship standard Maximum Internal Storage Capacity Configuration Hot Plug SFF SAS 9.6 TB 8 X 1.2 TB Hot Plug LFF SAS 8 TB 4 X 2 TB Hot Plug LFF SATA 4 TB 4 X 1 TB Hot Plug SFF SAS SSD 3.2 TB 8 ...
Page 9 - information, please visit
QuickSpecs HPE ProLiant DL160 Gen10 Server Standard Features Page 9 HPE Server UEFI/Legacy ROM Unified Extensible Firmware Interface (UEFI) is an industry standard that provides better manageability and more secured configuration than the legacy ROM while interacting with your server at boot time. H...
Page 10 - or
QuickSpecs HPE ProLiant DL160 Gen10 Server Standard Features Page 10 Server Utilities Active Health System The HPE Active Health System (AHS) is an essential component of the iLO management portfolio that provides continuous, proactive health monitoring of HPE servers. Learn more at http://www.hpe.c...
Page 11 - Security
QuickSpecs HPE ProLiant DL160 Gen10 Server Standard Features Page 11 Security • UEFI Secure Boot and Secure Start support • Immutable Silicon Root of Trust • FIPS 140-2 validation • Common Criteria certification • Configurable for PCI DSS compliance • Advanced Encryption Standard (AES) and Triple Da...
Page 12 - Optional Features
QuickSpecs HPE ProLiant DL160 Gen10 Server Optional Features Page 12 Server Management HPE iLO Advanced HPE iLO Advanced licenses offer smart remote functionality without compromise, for all HPE ProLiant servers. The license includes the full integrated remote console, virtual keyboard, video, and m...
Page 13 - Service and Support; The HPE Support Center Mobile App
QuickSpecs HPE ProLiant DL160 Gen10 Server Service and Support Page 13 HPE Pointnext - Service and Support Protect your business beyond warranty with HPE Support Services HPE Pointnext provides a comprehensive portfolio including Advisory and Transformational, Professional, and Operational Services ...
Page 14 - Configuration Information; These SKUs are not currently available; Runs at 2133 MT/s due to processor
QuickSpecs HPE ProLiant DL160 Gen10 Server Configuration Information Page 14 1. Pre-configured models ship with the configurations below. Options can be selected from the Core or Additional options section of this QuickSpecs. 2. Hewlett Packard Enterprise does not allow factory integration of option...
Page 15 - Core Options; Up to two processors supported.
QuickSpecs HPE ProLiant DL160 Gen10 Server Core Options Page 15 HPE Processors Processor Option Kits HPE DL160 Gen10 Intel Xeon-Silver 4110 (2.1GHz/8-core/85W) Processor Kit 878947-B21 HPE DL160 Gen10 Intel Xeon-Bronze 3106 (1.7GHz/8-core/85W) Processor Kit 878945-B21 NOTE: Up to two processors supp...
Page 16 - HPE I/O Expansion Options; HPE DL160 Gen10 FlexibleLOM/NVMe Riser Kit; HPE Power Supplies; HPE 500W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
QuickSpecs HPE ProLiant DL160 Gen10 Server Core Options Page 16 HPE I/O Expansion Options HPE DL160 Gen10 FlexibleLOM/NVMe Riser Kit 875748-B21 NOTE: Supported on CPU1 NOTE: This riser is mandatorily required to use FlexibleLOM adapters HPE DL160 Gen10 CPU2 x16 PCIe Riser Kit 866436-B21 NOTE: Requir...
Page 17 - Additional Options; There is no Oneview support on the HPE ProLiant DL160 Gen10
QuickSpecs HPE ProLiant DL160 Gen10 Server Additional Options Page 17 Embedded Management HPE iLO Advanced HPE iLO Advanced Electronic License with 1yr Support on iLO Licensed Features E6U59ABE HPE iLO Advanced 1-server License with 1yr Support on iLO Licensed Features 512485-B21 HPE iLO Advanced Fl...
Page 18 - HPE 1U Gen10 4LFF Smart Array SAS Cable Kit
QuickSpecs HPE ProLiant DL160 Gen10 Server Additional Options Page 18 HPE Cable Options HPE 1U Gen10 4LFF Smart Array SAS Cable Kit 866452-B21 HPE 1U Gen10 8SFF Smart Array SAS Cable Kit 866448-B21 Optional Software HPE Smart Array SR Secure Encryption (Data at Rest Encryption/per Server Entitlement...
Page 19 - Memory Population guidelines
QuickSpecs HPE ProLiant DL160 Gen10 Server Memory Page 19 Memory Population guidelines HPE DL160/DL180 Gen 10 Servers Front Server (2+1+1 slots per channel) HPE ProLiant Gen10 8 slot per CPU DIMM population order *Unbalanced, not recommended
Page 20 - Capacity references are rounded to the common gigabyte (GB) values.
QuickSpecs HPE ProLiant DL160 Gen10 Server Memory Page 20 General Memory Population Rules and Guidelines : • Install DIMMs only if the corresponding processor is installed. • If only one processor is installed in a two-processor system, only half of the DIMM slots are available. • To maximize perfor...
Page 21 - Technical Specifications; Rated Line Voltage
QuickSpecs HPE ProLiant DL160 Gen10 Server Technical Specifications Page 21 System Unit Dimensions 4.29 x 43.46 x 61.49 cm 1.69 x 17.11 x 24.21 in Weight (approximate) 24.19lb 10.97kg 30.69 lb 13.92 kg 25.69 lb 11.65 kg 34.69 lb 15.74kg SFF Minimum: 8 SFF chassis with 1x SFF HDD, 1 X Memory DIMM, 3 ...
Page 22 - configurations and are for reference only.
QuickSpecs HPE ProLiant DL160 Gen10 Server Technical Specifications Page 22 Relative Humidity Operating 8% to 90% - Relative humidity (Rh), 28°C maximum wet bulb temperature, non-condensing. (non-condensing) Non-operating 5 to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb temperature...
Page 23 - HPE Smart Array; please refer to their
QuickSpecs HPE ProLiant DL160 Gen10 Server Technical Specifications Page 23 HPE Smart Array For latest information on HPE Smart Array Gen10 Controllers for HPE ProLiant DL, ML and Apollo Servers please refer to their QuickSpecs. (E208i-a,E208i-p,E208e-p,P408i-a,P408i-p,P408e-p,P816i-a) https://h2019...
Page 24 - Summary of Changes; Version 1
QuickSpecs HPE ProLiant DL160 Gen10 Server Summary of Changes Page 24 Date Version History Action Description of Change 04-Feb-2019 Version 1 New New QuickSpecs Sign up for updates © Copyright 2019 Hewlett Packard Enterprise Development LP. The information contained herein is subject to change witho...
