Hotpoint FEW10 - Manuals - manualsarea.com

Page 2 - Getting to Know your Appliance; Cleaning the Exterior:; Key Contacts

Getting to Know your Appliance Plumbing Indicator Line label Cold Water inlet point and attachedFill Hose (Blue connector) Control Panel Interlocking door and release lever Rating Plate Mains Cable Drainage Hose Hooked End Support Dispenser Drawer Front Adjustable Feet Back Feet Cleaning the Exterio...

Page 3 - Electricity Supply; Fuses; Changing the Plug; DR; Models

Electricity Supply WARNING: The appliance must be earthed. CE marking certifies that this appliance conforms to the followingEEC directives:Low Voltage Equipment - 72/23/EEC & 93/68/EECElectromagnetic Compatibility - 89/336/EEC, 92/31/EEC & 93/68/EEC Fuses Your appliance comes fitted with a ...

Page 4 - Installation; WO FRONT FEET ARE NOT; BOTH; transit bolts; MUST; OR; NOTE: Hotpoint recommend

Installation 3 DRAINAGE SYSTEM... we recommend one of the following: NOTE: ALTHOUGH YOU MAY NEED TO MOVE THE HOOKED END SUPPORT ALONG THE GREY DRAINAGE HOSE, DO NOT REMOVE IT. WHICHEVER DRAINAGE METHOD YOU USE, MAKE SURE THAT THE HOOKED END SUPPORT IS FIXED LEVEL TO, OR ABOVE THE ‘PLUMBING INDICATOR...

Page 5 - PARTS OF THE INSTALLATION AND TO THOROUGHLY; Adding Fabric Conditioner

2 CONNECT TO THE COLDWATER SUPPLY... The Dispenser Drawer STEP 3 ii i Index: 1. Drawer release latch2. Pre-wash detergent compartment Maximum 200ml powder or 100ml liquid 3. Main detergent compartment Maximum 400ml powder or 200ml liquid 4. Grate5. Fabric conditioner compartment 120ml maximum 1 2 3 ...

Page 6 - Programme Selector Dial; IMPORTANT INFORMATION:; WEIGHT OF; COTTON

Programme Selector Dial IMPORTANT INFORMATION: The temperature of the incoming water supply and selection of any Optional Wash Feature, ie. Energy Save, will affect the programme times*. Turn the programme selector dial from ‘OFF’ to the programme you need... NOTE:When the programmehas finished, ret...

Page 7 - Using your Machine; pause

Using your Machine STEP 5 On-Off / Selecting a programme... To pause a programme... NOTE: Progress indicator lights... OFF position Programme Active indicator light Door Locked indicator light ‘START/Hold To Resetbutton Programme selector dial Option buttons Programme End light The machine is switch...

Page 8 - Options; Save money and time on lightly soiled loads.; RINSE HOLD; ’ button; Auto half load

Options STEP 6 Button Selection: To select an option, press the button and you will see a light come on above the button.Press again to cancel, and the light will go out.You cannot alter the options once the machine is running. Energy Save... use this option to... Save money and time on lightly soil...

Page 9 - A Typical Wash Programme

When all selectionshave been made pressthe ‘ START/HOLD TO RESET ’ button. The ‘ PROG.END ’ light will go out and the‘ ACTIVE ’ light will illuminate to indicate the start of a programme. After a short timethe ‘ DOOR LOCKED ’ indicator light will illuminate. To cancel a programme once the machinehas...

Page 10 - More ‘Troubleshooting information and general pro

Troubleshooting - More ‘Troubleshooting information and general pro Check all loose items, such as coins, have been removed from the laundry. Have both transit bolts been removed from the machine? See STEP 2: Installation Is the fuse in the plug OK? MY MACHINE MAKES A NOISE OR VIBRATES IN A SPIN PRO...

Page 12 - Indesit; Hotpoint guarantee; Guarantee terms and conditions; Recycling & Disposal Information; Disposal of old electrical appliances

Indesit Company UK Limited, Morley Way, Peterborough, PE2 9JB. Hotpoint guarantee After Sales Service “Satisfac tion guaranteed or your money back” We give you a unique ‘satisfaction guaranteed’ promise - valid for 90 days - after you have purchased your Hotpoint appliance. If there is a technical p...

Hotpoint FEW10 - Manuals

Manuals:

Manual Hotpoint FEW10

Summary

Hotpoint Manuals