Hotpoint AQ113DA 697 E - Manuals

Page 2 - Installation; Unpacking and levelling; Unpacking; see figure; Levelling; Connecting the electricity and; Connecting the water inlet hose; Before connecting the inlet hose to the water

EN 2 Installation ! This instruction manual should be kept in a safe place for future reference. If the washing machine is sold, given away or moved, please ensure the manual is kept with the machine, so that the new owner may benefit from the advice contained within it. ! Read these instructions ca...

Page 3 - Replacement fuse covers:; Earth

EN 3 Connecting the drain hose Connect the drain hose, without bending it, to a draining duct or a wall drain situated between 65 and 100 cm from the floor; The drain hose may be connected to an under-sink trap. Before connecting the drain hose from the machine ensure that any blanks or removable en...

Page 4 - Disposing of the appliance:

EN 4 As the colours of the wires in the lead may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: Connect Green & Yellow wire to terminal marked E or or coloured Green or Green & Yellow. Connect Brown wire to terminal marked L or coloured ...

Page 5 - Technical data

EN 5 Technical data Model AQ113DA 697 E Dimensions width 59.5 cm height 85 cm depth 64,5 cm Capacity from 1 to 11 kg Electrical connections please refer to the technical data plate fixed to the machine Water con- nections maximum pressure 1 MPa (10 bar) minimum pressure 0.05 MPa (0.5 bar) drum capac...

Page 6 - Care and maintenance; see

EN 6 Care and maintenance Cutting off the water and electricity supplies • Turn off the water tap after every wash cycle. This will limit wear on the hydraulic system in the machine and help to prevent leaks. • Unplug the appliance when cleaning it and during all maintenance work. Cleaning the machi...

Page 7 - Precautions and tips; General safety

EN 7 Precautions and tips ! The machine was designed and constructed in accordance with international safety regulations. The following information is provided for safety reasons and must therefore be read carefully. General safety • This appliance was designed for domestic use only. • This applianc...

Page 8 - Description of the machine

EN 8 washing additives compartment : for fabric softener or liquid additives. We recommend that the maximum level indicated by the grille is not exceeded, and that concentrated fabric softeners are diluted. TOUCH CONTROL PANEL To adjust the settings, gently press the icon inside the sensitive (touch...

Page 9 - Touch control panel

EN 9 9 WASH CYCLE SELECTOR knob Button with ON/OFF indicator light Touch control panel Button with ON/OFF indicator light: press this briefly to switch the machine on or off. The green indicator light indicates that the machine is switched on. To switch off the washing machine during the wash cycle,...

Page 10 - Running a wash cycle

EN 10 WARNING: before you use the washing machine for the first time, run a wash cycle with detergent and no laundry, using the 90° cottons cycle. 1. SWITCH THE MACHINE ON. Press the button. All the indicator lights will illuminate for 1 second and the text AQUALTIS will appear on the display; the i...

Page 11 - Wash options; Wash cycles and options; Table of wash cycles

EN 11 11 Wash options Steam Hygiene This option enhances washing performance by generating steam during the wash cycle that eliminates any bacteria from fibres while treating them at the same time. Place the laundry in the drum, choose a compatible programme and select option “ “. ! The steam genera...

Page 12 - Detergents and laundry; Detergent; Washing recommendations

EN 12 Detergents and laundry programme “ “. At the end of the cycle, garments will be relaxed and fragrant. ! Not recommended for wool or silk garments. ! Do not add too much perfume to the sponge in order to avoid it dripping. ! Do not add softeners or detergents. Duvets: to wash double or single d...

Page 13 - Trouble shooting

EN 13 Trouble shooting Your washing machine could occasionally fail to work. Before contacting the Technical Assistance Centre ( see “Assistance” ), make sure that the problem cannot be solved easily using the following list. Problem: The machine does not switch on. The wash cycle does not start. Th...

Page 15 - Assistance; Guarantee

EN 15 Assistance Guarantee 12 Months Parts and Labour Guarantee Your appliance has the benefit of our manufacturer’s guarantee, which covers the cost of breakdown repairs for twelve months from the date of purchase. This gives you the reassurance that if, within that time, your appliance is proven t...

Page 16 - After Sales Service; Recycling & Disposal Information

EN 16 195109038.00 11/2012 - Xerox Fabriano After Sales Service No one is better placed to care for your Hotpoint appliance during the course of its working life than us - the manufacturer. Essential Contact Information Hotpoint Service We are the largest service team in Europe offering you access t...