Hotpoint 6kg Ultima - Manuals

Installation 5 Description C ont ents Programmes and Option Modif iers C ontrol P anel F eatures Installation Wash L abels Explained Det ergents and L aundry C are and Maint enanc e Prec autions and A dvic e Something Wrong - T roubleshooting Servic e GB ! Read these instructions carefully: the foll...

Installation Did you know?... ● ...the transit fixings are fitted to ensure that your machine is undamaged during delivery. ● ...both of the transit fixings MUST BE removed before using the machine, be sure to remove TWO bolts,TWO washers, TWO rubber grommets and TWO nylon spacers, not doing so will...

Water Connection Connecting the cold water inlet hoses with the ‘Y’piece connector. ! Remember: please use the new hoses supplied, fitted to the machine. Old hoses may cause leaks dueto worn out washers or may be split due to waterpressure. ! Remember: This is a cold-fill machine... BOTH fill hoses ...

Installation Drainage Connection ! Although you may need to move the hooked end support along the grey drainage hose, DO NOT removeit. ! Whichever drainage method you use, make sure that the hooked end support is fixed level to, or above the‘Plumbing Indicator Line’ ( see Description page 2). We rec...

Control Panel Features 9 Description C ont ents Programmes and Option Modif iers C ontrol P anel F eatures Installation Wash L abels Explained Det ergents and L aundry C are and Maint enanc e Prec autions and A dvic e Something Wrong - T roubleshooting Servic e GB Ultima Ultima control panel feature...

Starting a Programme ! Do not allow children to play with the machine or tamper with the controls. ! Do not overload the machine. This may damage the laundry and reduce the quality of the wash.The maximum load (Cotton) is 6kg WASH / 5kg DRY. ! Do not try to open the dispenser drawer during any progr...

Drying Setting drying programmes Independent drying only programme: 1. Remove the wet laundry and in drum dosing ball (if used) until the correct ‘Drying Weight Load’( see Drying table, below ) is left in the drum. Close the door until it clicks shut. 2. Press the ON/OFF Pause button to turn the mac...

Important information Operating the machine ! To improve the life expectancy of your machine, it is recommended that you do not stop or cancel your programme during the drying cycle. ! It is recommended that you allow the programme to complete its full cycle, which includes completing the ‘cool tumb...

Programme Table Programme Table * Programme setting for test in accordance with IEC 50229 and EN 50229 Label Pr ogramme Pr ogramme T ype / F abric Description T emp Max Appr o xim ate Soil Le vel Spin A v ailab le Recommended Selector (˚C) Load Pr ogramme Speed Options Deter g ent Button (kg) Time (...

Option Modifiers andSpecial Features 14 GB Special features ! Not all special features can be used on all programmes - ( see Programme Table for option availability ). ● Fast Wash: The Fast Wash programmes are designed for lightly soiled loads delivering quick results for smaller loads, using less e...

Option Modifiers andSpecial Features 15 Description C ont ents Programmes and Option Modif iers C ontrol P anel F eatures Installation Wash L abels Explained Det ergents and L aundry C are and Maint enanc e Prec autions and A dvic e Something Wrong - T roubleshooting Servic e GB Option modifiers ! N...

Automatic features Unbalanced load detection The machine has an inbuilt feature to prevent it from spinning too fast with an unbalanced load. When an unbalanced load is detected, the machine will attempt to redistribute the load in order to balance it evenly toachieve full spin speed.If this is not ...

Certain laundry products work better in some machines than others. At Hotpoint we know this is true because we’ve done the research to prove it. We used real everyday clothes and ran tests to find out which washing powder works best with Hotpoint. The results proved that Hotpoint and Ariel produces ...

Care and maintenance Cleaning ! Unplug your machine when cleaning it and before all maintenance operations. ! Do not clean any part of the machine with abrasive cleaners, scouring agents, acids, any bleach or metal polish as they may cause damage. ● Use a damp cloth or silicon polish to clean the ex...

Precautions and advice General safety ● Unplug your appliance when cleaning it and duringall maintenance operations. ● This machine should only be used by adults and in accordance with the instructions. ● Do not overload or underload the machine. In addition to reducing the quality of the wash,this ...

Precautions and advice Safety advice ! This machine was designed and built in compliance with the applicable international safety regulations.The following information is provided for your safetyand should be read carefully. ● This machine is designed for domestic use only. ● Before using your machi...

Something Wrong? - Troubleshooting The machine won’t start:(Nothing lights up on the control panel). The display on the controlpanel lights up but the washcycle will not start. The machine fails to fill withwater. The machine does not drainor spin (during the first washcycle, after installation). Th...

Something Wrong? - Troubleshooting 23 Section 3: Specific Error Messages on the LCD Display Your machine carries out automatic checks at various stages of the wash cycles - Error messages will be displayedon the control panel to indicate there is something wrong.The error message displayed is depend...

Spare Parts This is a complex machine. Repairing it yourself or having a non-authorised person try to repair it couldcause harm to one or more persons, could damagethe machine and could invalidate the spare parts warranty.Call an authorised technician if you experience problemswhile using the machin...