Hoover Vacuum Cleaner Breeze- Manuals

Page 2 - The plug is fitted with a 13 amp fuse.; IMPORTANT:The wires in the mains lead are; DO NOT TAKE IT BACK TO THE SHOP; IMPORTANT SAFETY REMINDERS; ELECTRICITY CAN BE

User’s manual - This cleaner should only be used for its intended purpose as described in these instructions. Ensure that these are fully understood before operating this appliance. Only use attachments recommended or supplied by Hoover. When using cleaning tools, ensure that the cleaner is kept in ...

Page 3 - BREEZE; GETTING TO KNOW YOUR CLEANER

Effortless cleaning with your new Hoover BREEZE When first unpacking your cleaner please check all items are included: Cleaner bodyMain handleLong Crevice Tool2 in 1 tool (Furniture nozzle / Dusting brush)Rigid extension tubePet Hair & Allergen Remover* If any parts are missing contact your reta...

Page 4 - PREPARING YOUR CLEANER; and then fixe it with the screw provided.; CARPET CARE CONTROL SELECTOR; When cleaning hard floors; CLEANER RELEASE

PREPARING YOUR CLEANER Insert the main handle in the cleaner body and then fixe it with the screw provided. To tighten the screw you can use a standard coin. CARPET CARE CONTROL SELECTOR The carpet care control selector raises and lowers the height of the foot. For a medium pile carpet, the best car...

Page 5 - CLEANING TOOLS; Handle; CLEANING THE STAIRS

CLEANING TOOLS ! IMPORTANT! When using cleaning tools, the cleaner must be kept in the upright position, particularly when cleaning stairs. The nozzle height should also be set to tool mode. Remove hose from the hose socket. Remove the crevice tool from the extension tube. Fit the extension tube to ...

Page 6 - Ensure the protective mesh is

EMPTYING THE DUST CONTAINER Hold the container over the Bin and press the easy open button at the rear of the container. The dust container door will open and you can empty into a bin with no dust contact. Once emptied, gently tap or shake the container to release any excess dust from the filters. D...

Page 7 - Switch the cleaner off and

CHANGING THE BELT OR BRUSHES CLEARING A BLOCKAGE IMPORTANT: Switch the cleaner off and remove the plug from the electricity supply before dismantling cleaner IMPORTANT: Switch the cleaner off and remove the plug from the electricity supply before dismantling cleaner If your cleaner is not picking up...

Page 8 - Environment - WEEE Directive; USE ONLY HOOVER SPARES; CONSUMABLES

Genuine HOOVER Spares Tel. 08443 712 758 www.hooverspares.com Always replace parts with genuine Hoover spares. When ordering parts, always quote your model number. Hoover Customer Helpline Should any faults occur with your cleaner during the first 12 months, contact the Hoover Customer Helpline on t...

Page 9 - WARNING; User checklist; Is there a working electricity supply to the cleaner?; IMPORTANT

WARNING A thermal cut out switches off the cleaner to prevent overheating if it is used when full or there is a blockage or dirty filters. If this should happen switch off, unplug and correct the fault. It will take approximately 30 minutes for the cut out to automatically reset. User checklist If y...