Page 2 - Thank you for choosing a HOOVER; MANUFACTURING CODE; CONTENTS
Important Safety Instructions .......................................................................... 3 Vacuum Assembly ............................................................................................. 5 Carton Contents.....................................................................
Page 3 - IMPORTANT SAFETY INSTRUCTIONS; SAVE THESE INSTRUCTIONS; READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE.; ELECTRIC SHOCK OR INJURY:; WASH HANDS AFTER HANDLING.
3 IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE. WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY: • Fully assemble before ...
Page 5 - ATTACH HANDLE
POSITION TOOLS 1. VACUUM ASSEMBLY A. Handle*B. Vacuum BaseC. WandD. Crevice ToolE. Turbo ToolF. Adjustable Dusting Brush*G. (1) Large Screw H. Dirt Cup *Varies per model. Remove all parts from carton and identify each item shown. Make sure all parts are located before disposing of packing materials....
Page 6 - VACUUM DESCRIPTION; CARPET HEIGHT ADJUSTMENT*; IMPORTANT; CORD RELEASE
2.1 VACUUM DESCRIPTION 2.2 2. HOW TO USE 1. Handle 2. Dirt Cup Release Button 3. Carry Handle 4. System Check Indicator 5. Rinsable Filter Access 6. Dirt Cup 7. Filter made with HEPA media 8. Height Adjustment 9. Furniture Guard 10. Adjustable Dusting Brush 11. Wand 12. Crevice Tool (inside wand) 13...
Page 8 - HOW TO CLEAN TOOLS; WARNING; CORD REWIND AND STORAGE; PROBLEM; STAIR CLEANING; CAUTION
8 To clean Hose and Turbo Tool, wipe with a damp cloth. DO NOT submerge in water. Other cleaning tools may be washed in warm water with a detergent. Rinse and air dry 24 hours before using. HOW TO CLEAN TOOLS 4. MAINTENANCE Familiarize yourself with these home maintenance tasks as proper use and car...
Page 9 - Rinsable Filter: How to Clean; NOTICE
9 How to Empty 4.3 Press dirt cup release button (C) and pivot cup out.4.4 Hold dirt cup over trash receptacle, push dirt cup door release lever (D) to open dirt cup door (E).Close dirt cup door (E). Press firmly to secure. 4.4 E 4.5 4.5 Place bottom of dirt cup into vacuum body first. Pivot dirt cu...
Page 10 - Filter Made With HEPA Media: How to Clean; Cyclonic Filter Assembly: How to Clean; Filter Made With HEPA Media; Rinsable Filter
10 4.13 With fingers under filter door lip, pull filter frame (A) out and away from vacuum body. Hold filter over a trash receptacle and tap out dirt and debris.4.14 Bottom filter (B) must be pushed back into place first. 4.15 Then push the upper handle in (C) until it clicks.4.16 Filter diagram: (B...
Page 11 - BRUSHROLL
11 Actual model may vary from images shown. Brushroll - Bottom plate with screws Place handle in the low position and turn the cleaner over so the bottom side is up.4.17 Remove the 6 screws as shown with a Phillips screwdriver.4.18 Pivot off bottom plate.4.19 Remove any debris and/or hair from brush...
Page 12 - BELT; When To Replace
12 BELT CAUTION ! ! To reduce the risk of injury from moving parts - Unplug before servicing. The belt is located under the bottom plate of the vacuum and should be checked from time to time to be sure it is in good condition. When To Replace Replace belt if it is damaged, cut or broken. Refer to di...
Page 13 - HOSE; LUBRICATION; How to Clean
13 Actual model may vary from images shown. HOSE 4.25 A To reduce the risk of personal injury - Unplug before cleaning or servicing. How to Clean 4.25 To remove hose for tool use, press the hose release button (A) and pull hose end out. Clear away debris or obstructions from hose. Do not use sharp o...
Page 16 - LIMITED THREE YEAR WARRANTY
7. WARRANTY LIMITED THREE YEAR WARRANTY (Domestic Use) WHAT THIS WARRANTY COVERS When used and maintained in normal household use and in accordance with the Owner’s Manual, your HOOVER ® product is warranted against original defects in material and workmanship for a full two year from date of purcha...