Hoover SteamVac- Manuals

6 1. Hand grip2. Solution trigger: press to release clean solution. 3. Cord clip: place cord in clip to keep it out of the way when using cleaner 4. Hose5. Hose holder: wrap hose around holder and hooks (6) for storage. 6. Hose hooks7. Cord hooks: wrap cord around hooks for storage. The top hook can...

7 19 20 21 The deep cleaner may also be lift-ed by placing a hand under the upper clean solution tank handle asshown. 19 Automatic “shut off” When the re c o v e ry tank (lower tank) isfull the automatic shutoff mechanism will shut off the deep cleaner suction ( s u c- tion will be noticeably reduce...

8 26 27 28 29 Replace cap. Rotate cap clock- wise until it locks In place. Cap must be locked In place for properperformance and to prevent leaking. 26 Position bottom of tank into unitand press on tank handle to snap tank into place. 27 Recovery tank (lower tank) The recovery tank holds the dirty s...

9 30 After cleaning a. Allow carpet or upholstery to dry. To help prevent matting and resoiling thecarpet, keep children and pets awayfrom surface until it is completely dr y. If it is necessary to walk on damp car- pet, place towels or white cloths on thetraffic areas. If furniture must be replaced...

10 Picking up spills Cleaning bare floors Using the tools 32 33 Your HOOVER SteamVac deep cleanermay also be used to pick up small liq- uid spills (1 gallon or less, never toexceed 1/4 inch in depth) on carpet, upholstery, or bare floors. For best results, pick up spills immedi-ately by placing the ...

11 35 After using tool 1. Follow steps a and b for “After clean-ing” on page 9. 2. Rinse tool and hose by filling sinkwith a small amount of water. Turn deep cleaner ON and pickup the waterwith the tool. 35 3. Drain hose by turning deepcleaner ON and holding end of hose up for several seconds. Do no...

13 If you have aproblem If a minor problem occurs, it usually canbe solved quite easily when the cause isfound by using the check list below. Problem: Machine won’t run Problem: Low suction Problem: Clean solution won’t dispense Possible cause Possible solution • Not firmly plugged in• Plug unit in ...

6 1. Hand grip2. Solution trigger: press to release clean solution. 3. Cord clip: place cord in clip to keep it out of the way when using cleaner 4. Hose5. Hose holder: wrap hose around holder and hooks (6) for storage. 6. Hose hooks7. Cord hooks: wrap cord around hooks for storage. The top hook can...

7 19 20 21 The deep cleaner may also be lift-ed by placing a hand under the upper clean solution tank handle asshown. 19 Automatic “shut off” When the re c o v e ry tank (lower tank) isfull the automatic shutoff mechanism will shut off the deep cleaner suction ( s u c- tion will be noticeably reduce...

8 26 27 28 29 Replace cap. Rotate cap clock- wise until it locks In place. Cap must be locked In place for properperformance and to prevent leaking. 26 Position bottom of tank into unitand press on tank handle to snap tank into place. 27 Recovery tank (lower tank) The recovery tank holds the dirty s...

9 30 After cleaning a. Allow carpet or upholstery to dry. To help prevent matting and resoiling thecarpet, keep children and pets awayfrom surface until it is completely dr y. If it is necessary to walk on damp car- pet, place towels or white cloths on thetraffic areas. If furniture must be replaced...

10 Picking up spills Cleaning bare floors Using the tools 32 33 Your HOOVER SteamVac deep cleanermay also be used to pick up small liq- uid spills (1 gallon or less, never toexceed 1/4 inch in depth) on carpet, upholstery, or bare floors. For best results, pick up spills immedi-ately by placing the ...

11 35 After using tool 1. Follow steps a and b for “After clean-ing” on page 9. 2. Rinse tool and hose by filling sinkwith a small amount of water. Turn deep cleaner ON and pickup the waterwith the tool. 35 3. Drain hose by turning deepcleaner ON and holding end of hose up for several seconds. Do no...

13 If you have aproblem If a minor problem occurs, it usually canbe solved quite easily when the cause isfound by using the check list below. Problem: Machine won’t run Problem: Low suction Problem: Clean solution won’t dispense Possible cause Possible solution • Not firmly plugged in• Plug unit in ...