Hoover SpinScrub- Manuals

Press cord into cord clip on back ofhandle. Pull cord tight and wrap cordaround hooks (A2). 5 1-10 1 - 1 1 1 - 1 2 1 - 1 3 1 - 1 4 1 - 1 5 A2 H G F Storing hose & tools Store hose on rack by first positioninghose in front section of clip. I Continue wrapping hose over upperhose hook (F) and unde...

6 1. Hand grip2. Solution trigger: press to release clean solution. 3. Clean Surge™ button4. Hose5. Hose holder: wrap hose around holder and top hose hook (6) for storage. 6. Hose hook7. Cord hooks: wrap cord around hooks for storage. The top hook can be rotated right or left for quick and easy cord...

7 The deep cleaner may also be lifted by placing a hand under the upper cleansolution tank handle as shown. 2-5 2-7 2-8 2-6 Automatic “shut off” When the re c o v e ry tank (lower tank) is fullthe automatic shutoff mechanism will shuto ff the deep cleaner suction (suction will be noticeably reduced)...

9 Continued ➜ For full suction, it is important thatthe recovery tank lid is properlysecured before cleaning. Raise tank handle to carrying position to place it into base of deep cleaner. Movehandle completely forward to lock tank into place (see Fig. 2-16). Raise handle of deep cleaner to uprightpo...

Carpet Cleaning To clean the outside of the machine,wipe off dirt with a cloth dampened inwarm water and mild detergent. Do not use solvent or petroleum based prod-ucts to clean the machine . 3-4 Read “Before you begin cleaning”instructions on pa ge 9. 1. Fill clean solution tank (upper tank)with HO...

11 Continued ➜ Cleaning bare floors 3-7 How to attach bare floorattachment Disconnect deep cleaner from electri -cal outlet. To prevent possible leaking, removeclean solution tank (Fig. 2-9) and recov-ery tank (Fig. 2-16) before positioningbare floor attachment.Set tanks aside (do not set tank on fu...

3-13 3-14 3-15 After using tool 1. Follow steps a and b for “After clean-ing” on pages 9 & 10. 2. Rinse tool and hose by filling sink with a small amount of water. Turndeep cleaner ON and pickup the waterwith the tool. 3. Drain hose by turning deep cleanerON and holding end of hose up for sev-er...

3-16 13 9. Lift tool, and position it against riser.Pull tool slowly over carpet without pressing trigger (dry stroke). It is best to alternate wet and dry strokesas described above. End with more drystrokes and watch for the green ‘MAXExtract’ light to come on to aid in fasterdrying of carpet. 10. ...

14 S t o r a g e Before storing: • Empty solution tank and rinse thoroughly with clean water. • Replace empty solution tank and turn deep cleaner ON. Squeeze trigger and push deep cleaner for-ward and back several times to expel any solution remaining in thedeep cleaner’s system. (Do not usedeep cle...

15 Service To obtain approved HOOVER serviceand genuine HOOVER parts, locate the nearest Hoover Factory Service Center or Authorized Hoover WarrantyService Dealer (Depot) by: • checking the Yellow Pages under Vacuum Cleaners - Household” OR • checking the list of Factory Service Centers provided wit...

Press cord into cord clip on back ofhandle. Pull cord tight and wrap cordaround hooks (A2). 5 1-10 1 - 1 1 1 - 1 2 1 - 1 3 1 - 1 4 1 - 1 5 A2 H G F Storing hose & tools Store hose on rack by first positioninghose in front section of clip. I Continue wrapping hose over upperhose hook (F) and unde...

6 1. Hand grip2. Solution trigger: press to release clean solution. 3. Clean Surge™ button4. Hose5. Hose holder: wrap hose around holder and top hose hook (6) for storage. 6. Hose hook7. Cord hooks: wrap cord around hooks for storage. The top hook can be rotated right or left for quick and easy cord...

7 The deep cleaner may also be lifted by placing a hand under the upper cleansolution tank handle as shown. 2-5 2-7 2-8 2-6 Automatic “shut off” When the re c o v e ry tank (lower tank) is fullthe automatic shutoff mechanism will shuto ff the deep cleaner suction (suction will be noticeably reduced)...

9 Continued ➜ For full suction, it is important thatthe recovery tank lid is properlysecured before cleaning. Raise tank handle to carrying position to place it into base of deep cleaner. Movehandle completely forward to lock tank into place (see Fig. 2-16). Raise handle of deep cleaner to uprightpo...

Carpet Cleaning To clean the outside of the machine,wipe off dirt with a cloth dampened inwarm water and mild detergent. Do not use solvent or petroleum based prod-ucts to clean the machine . 3-4 Read “Before you begin cleaning”instructions on pa ge 9. 1. Fill clean solution tank (upper tank)with HO...

11 Continued ➜ Cleaning bare floors 3-7 How to attach bare floorattachment Disconnect deep cleaner from electri -cal outlet. To prevent possible leaking, removeclean solution tank (Fig. 2-9) and recov-ery tank (Fig. 2-16) before positioningbare floor attachment.Set tanks aside (do not set tank on fu...

3-13 3-14 3-15 After using tool 1. Follow steps a and b for “After clean-ing” on pages 9 & 10. 2. Rinse tool and hose by filling sink with a small amount of water. Turndeep cleaner ON and pickup the waterwith the tool. 3. Drain hose by turning deep cleanerON and holding end of hose up for sev-er...

3-16 13 9. Lift tool, and position it against riser.Pull tool slowly over carpet without pressing trigger (dry stroke). It is best to alternate wet and dry strokesas described above. End with more drystrokes and watch for the green ‘MAXExtract’ light to come on to aid in fasterdrying of carpet. 10. ...

14 S t o r a g e Before storing: • Empty solution tank and rinse thoroughly with clean water. • Replace empty solution tank and turn deep cleaner ON. Squeeze trigger and push deep cleaner for-ward and back several times to expel any solution remaining in thedeep cleaner’s system. (Do not usedeep cle...

15 Service To obtain approved HOOVER serviceand genuine HOOVER parts, locate the nearest Hoover Factory Service Center or Authorized Hoover WarrantyService Dealer (Depot) by: • checking the Yellow Pages under Vacuum Cleaners - Household” OR • checking the list of Factory Service Centers provided wit...