Hoover S1049 - Manuals - manualsarea.com

Page 2 - Index

Fill in and retain! The HOOVER vacuum cleaner you have just purchased is designed for carpet and floor cleaning and has cleaning tools for above the floor cleaning. Yourcleanerisa model no. and hasaserialnumber For your personal records, please enter the model number and serial number in the spaces ...

Page 3 - Important Safeguards!; Save

Important Safeguards! l Read all instructions. Warning: Electric shock could occur if used outdoors or on wet sur- faces. Close supervision is necessary when any appliance is used by or near children. Do not allow vacuum cleaner to be used as a toy or to run unattended at any time. Do not use cleane...

Page 4 - Unpacking

Unpacking Unpack the cleaner from the carton and identify the partsshown. Remove and dispose ofthe cardboard packing. A. Cleaner B. Tools and extension wands C. Hose OR D. Wheeled carrier and hose with tool holder deluxe model only The cleaner assembled will look like the drawing below. 6 8

Page 6 - How to assemble; Connect hose

How to assemble Connect hose Insert hose connector into opening in bag door by fitting prongs on end of hose connector into cor- responding slots in opening. Turnhose connector in either direction until it locks into position. Turn in opposite direction to remove from cleaner. 2. Attach extension wa...

Page 7 - Deluxe model only; Attach wheeled carrier

Push front of cleaner down to snap into place. Deluxe model only 3. Attach wheeled carrier The removable wheeled carrier canbe used for transporting your cleaner from room to room or foruse as you are cleaning. To attach wheeled carrier, first, open louvered door at the back of the cleaner. Then pos...

Page 8 - How to use; Rug and floor nozzle; Hard surface floors

How to use CAUTION: POTENTIAL SHOCK HAZARD This vacuum cleaner is not intended to be used where water may be present. Carpet will retain moisture long after it has been wet. This vacuum cleaner should not be used on wet or moist carpet. Rug and floor nozzle Use the combination rug and floor nozzle t...

Page 9 - Edge cleaning feature

On certain types of dense carpet, itmay be advantageous to keep thebrush in a position where it does not come in contact with the carpet. To lock brush into the noz- zle, adjust lever to “RUG” position then press the brush all the way in-to the nozzle with your finger. While still holding the brush,...

Page 10 - Cleaning tools; Attaching tools; To clean tools

Cleaning tools The cleaning tools allow you to do above the floor cleaning and to clean hard to reach areas. 1. Furniture nozzle for uphol- stered furniture, draperies, tapes-tries, mattresses, clothing, and automobile interiors. 2. Dusting brush for carved furniture, table tops, books, lamps, light...

Page 12 - Maintenance; The bag; To empty bag

Maintenance The following sections are concerned with proper maintenance of the cleaner. Familiarize yourself with these home maintenance tasks and keepthis owner’s manual in a convenient place where you can refer to it when needed. Proper use and care of your cleaner will assure continued cleaninge...

Page 13 - Replacing brush

Secondary filter The secondary filter protects the motor from dirt particles. It islocated at the front of the bag com- partment. When bag is removed, check filter, which is not remov- able. If filter is dirty, remove dirt with a small brush. Rug/f nozzle Replacing brush Replace the brush on the rug...

Page 14 - Lubrication

Lubrication The motor is equipped with two bearings that contain sufficient lubrication for the life of the motor. The addition of lubricant could cause damage.Therefore, do not add lubricant to either motor bearing. 14

Page 15 - VCMA

VCMA VACUUM CLEANER MANUFACTURERS ASSOCIATION (HOOVER -AN ASSOCIATION information has been compiled by the Vacuum Cleaner from Government and Private Sources concerned product safety. are for your and convenience. TO AVOID ELECTRIC SHOCK Never vacuum damp or wet surfaces or Do not store machine outd...