Hoover Power Nozzle- Manuals

q After using models without cord reel, wrap the cord around the OFF pedal (A), cord hook and lip (D) on rear of cleaner. To save space, the cleaner may bestored on its end. Familiarize yourself with these home maintenance task as proper use andcare of your cleaner will ensure contin- ued cleaning e...

Re-attaching bag lid q The bag lid and hinges are designed with a “break-away” fea- ture. If the lid is pushed open too far, itwill come off. It can be easily re- attached by aligning the hinges with theappropriate slots in the cleaner, as shown. Secondary filter How to clean Disconnect cleaner from...

q Return nozzle to original position:lift off nozzle cover. If belt is not broken, pull it off the motor pulley (A). Lift up end of agitator. Remove oldbelt from agitator and replace with new belt (B). Lettering on belt must be visible. q Stretch belt back and attach to l motor pulley (A). Hold oppo...

Lubrication The motor is equipped with bearings, which have been lubricated for the life ofthe motor. The addition of lubricant couldcause damage. Therefore, do not add lubricant to either motor bearing. The agitator is equipped with two ball bearings that should be lubricated period-ically by a Hoo...

q After using models without cord reel, wrap the cord around the OFF pedal (A), cord hook and lip (D) on rear of cleaner. To save space, the cleaner may bestored on its end. Familiarize yourself with these home maintenance task as proper use andcare of your cleaner will ensure contin- ued cleaning e...

Re-attaching bag lid q The bag lid and hinges are designed with a “break-away” fea- ture. If the lid is pushed open too far, itwill come off. It can be easily re- attached by aligning the hinges with theappropriate slots in the cleaner, as shown. Secondary filter How to clean Disconnect cleaner from...

q Return nozzle to original position:lift off nozzle cover. If belt is not broken, pull it off the motor pulley (A). Lift up end of agitator. Remove oldbelt from agitator and replace with new belt (B). Lettering on belt must be visible. q Stretch belt back and attach to l motor pulley (A). Hold oppo...

Lubrication The motor is equipped with bearings, which have been lubricated for the life ofthe motor. The addition of lubricant couldcause damage. Therefore, do not add lubricant to either motor bearing. The agitator is equipped with two ball bearings that should be lubricated period-ically by a Hoo...