Hoover Lightweight Commercial Cleaner- Manuals

Hold filter bag collar (A) as shown. Align opening in filter bag with dirt tube (B) inside the outer bag.Push bag collar firmly onto dirt tube. Tuck in filter bag; zip outer bag. 5 The assembled cleaner will looklike the drawing. 1. Handle2. ON/OFF switch3. Cord hooks: wrap cord around hooks for sto...

Edge cleaning Edge cleaning is provided on both sidesof nozzle to remove dirt in carpet nearbaseboards and furniture. Guide eitherside of nozzle parallel to edge of carpetor furniture. Disconnect cleaner from electricaloutlet before attempting to service itin any manner.Do not operate without filter...

29 Slip agitator through new belt (with lettering toward out- side of cleaner) and position belt in belt guide (C). Push end of belt intoopening in cleaner body. Reposition agitator making sure toalign flat sides of projection (D) onbelt end of agitator with flat sides ofslot (E) in cleaner body. Re...

8 Pull belt off motor pulley asshown. Remove bottom plate as shown inFig. 29 of “How to replace belt”. Remove agitator from cleaner anddiscard. Reposition belt and new agitator byreferring to Figs. 31 to 35. Place hood on cleaner bodyand press to snap all four latches. Pull up on hood slightly tomak...

9 Service To obtain approved HOOVER ser-vice and genuine HOOVER parts,locate the nearest Hoover Factory Service Center or AuthorizedHoover Warranty Service Dealer(Depot) by: • checking the Yellow Pages under “Vacuum Cleaners - Household” OR - • checking the list of Factory Ser- vice Centers provided...