Page 2 - Important Safeguards!; Save these instructions!
2 Important Safeguards! When using an electrical appliance, always follow basic precautions, includingthe following: WARNING: To reduce the risk of fire, electricshock, or injury: • Use indoors only. • Use only on surfaces moistened bythe cleaning process. Do not immerseproduct. • Connect to a prope...
Page 3 - Fill in and Save; Contents; Not all accessories are included with every; Parts needed for assembly; Thank you for choosing a HOOVER product.; PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE.; Accessories - vary by model
3 Fill in and Save Please enter the COMPLETE model and serial numbers in the spaces providedand save. The model and serial numbers are located on the data label on the back of thehandle. Model No. ____________________________ Serial No. _____________________________ Hint: Attach your sales receipt t...
Page 4 - Attach upper handle; Attach hose/tool caddy
Attach hose/cordhook Insert tabs on hook into slots on back ofcleaner. Snap hook onto cleaner. Slide tabs (E) on caddy into slots (F) onback of cleaner. 4 The assembled cleaner will look like thisdrawing. Model with SpinScrub™ handtool is shown. 1-2 Attach upper handle Remove clean water tank (upper...
Page 5 - SpinScrubTM hand tool
5 1-9 1-11 1-10 1-12 1-13 1-15 1-16 1-17 G H Rotate top of caddy toward cleaner handle. Slide caddy down so notch (G)on caddy rests in hook (H) on cleaner. Storing hose andtools Press hose, a few inches from nozzleconnector end (I), into caddy. Bringhose up and over top of caddy. Press hose into opp...
Page 7 - Handle release pedal; Deep Cleaner Description
7 2. How to use The assembled deep cleaner will look like the drawing. Model with SpinScrub™ hand tool is shown. 2-1 2-2 1. Hand grip2. Solution trigger: press to release cleaning solution 3. ON/OFF switch4. Wash/Rinse switch5. SpinScrub™ hand tool (not included with all models) 6. Carrying handle7....
Page 8 - Automatic shut off; Carrying handle; Clean water tank; How to fill
Automatic shut off When the recovery tank (lower tank) is fullthe automatic shutoff mechanism will shutoff the deep cleaner suction (suction will be noticeably reduced). At that time, the yellow float disk will riseto the top of the recovery tank lid (B).The deep cleaner will no longer pick updirty ...
Page 9 - Recovery tank
9 2-13 2-14 2-15 2-16 Fill container (16 oz.) with HOOVERCarpet/Upholstery Detergent orHOOVER Bare Floor Cleaner.Do not use Bare Floor Cleaner on carpet orupholstery. Do not use any type of wax with your ‘SteamVac’ deep cleaner. To assure proper results, use only HOOVER detergent. Replace container ...
Page 10 - After cleaning
10 Before you begincleaning a. Vacuum thoroughly - For carpet, use a HOOVER vacuum cleaner with anagitator for best results. Vacuum uphol-stery with a vacuum cleaner with clean-ing tool attachments. Use a crevice toolto reach into tufts and folds. Do not use the ‘SteamVac’ deep cleaner as a dryvacuu...
Page 11 - Carpet Cleaning; To clean nozzle
Carpet Cleaning Slide nozzle completely onto cleaner.Press down on nozzle to secure it. Replace recovery tank (Fig. 2-17). The nozzle must be in the properposition in order for the recovery tankto go on properly. Raise cleaner to upright position andreplace clean water tank (Fig. 2-15). 3-6 ON OFF W...
Page 12 - Cleaning bare floors; To clean floor; Using the tools; Attach hose
12 Cleaning bare floors 3-9 How to attach bare floorattachment (Available at additional cost if not includ-ed with your cleaner.) Unplug deep cleaner from electricaloutlet. To prevent possible leaking, removeclean water tank (Fig. 2-10) and recov-ery tank (Fig. 2-16) before positioningbare floor att...
Page 13 - Select tool; How to attach tools
3-15 3-16 Drain solution tube by placing roundend in sink and raising nozzle aboveyour head. Press the trigger. 13 Drain suction hose by turning deepcleaner ON and holding nozzle up forseveral minutes. Do not press trigger. Unplug deep cleaner from electricaloutlet.Disconnect hose and solution tubef...
Page 15 - To replace brushes; Cleaning upholstery; Removable brushes; To remove brushes
4-1 4-2 To replace brushes Align posts (A) on both ends of brushassembly with slots (B) in cleaner hous-ing. Make sure that the square post (C) alsoaligns with the square hole (D). Turnbrushes slightly until post fits easily intohole. Press brush assembly firmly to snap intoplace. 4-3 A A B B C D 3-...
Page 16 - Storage; Lubrication
16 Storage Before storing: • Empty clean water tank and let air dry. Replace on deep cleaner. • Unused detergent can be stored in the detergent container. • Empty recovery tank, rinse tank and lid thoroughly with clean water and let air dry. Allow brushes and underside of deepcleaner to air dry thor...
Page 17 - Service
17 Full One Year Warranty (Domestic Use) Your HOOVER® appliance is warrantedin normal household use, in accordancewith the Owner’s Manual against originaldefects in material and workmanship fora period of one full year from date of pur-chase. This warranty provides, at no costto you, all labor and p...