Page 2 - IMPORTANT SAFETY REMINDERS; Genuine Hoover Spares and Consumables; Always replace parts with Genuine Hoover spares and consumables.; Congratulations on the purchase of your new; ELECTRICITY CAN BE; DUST MANAGER
- - IMPORTANT SAFETY REMINDERS User’s manual - This cleaner should only be used for its intended purpose as described in these instructions. Ensure that these are fully understood before operating this appliance. Only use attachments recommended or supplied by Hoover. When using cleaning tools ensur...
Page 3 - GETTING TO KNOW YOUR CLEANER*; Effortless
- 3 - DUST MANAGER GETTING TO KNOW YOUR CLEANER* Handle On/Off switch Cleaner body Door Door release Carpet Care Control Selector Effortless cleaning with your new Hoover DUST MANAGER When first unpacking your cleaner please check all items are included: Cleaner Body Handle with securing screw Crevi...
Page 4 - Switching on and off
- 4 - 1 PREPARING TO USE YOUR CLEANER POWER SWITCH SETTING CARPET CARE CONTROL SELECTOR CLEANER LOCK RELEASE Insert handle into body of cleaner. Slide into position. Ensure handle is flush with body of cleaner. Tighten large screw (pre-fitted to handle upper hole). Insert small screw into handle low...
Page 5 - CLEANING THE STAIRS; IMPORTANT: When using cleaning tools, the cleaner must be kept
- 5 - CLEANING TOOLS* CLEANING THE STAIRS ! IMPORTANT: When using cleaning tools, the cleaner must be kept in the upright (parked) position, particularly when cleaning stairs. The carpet height selector should also be set to tool mode: It is dangerous to place the cleaner above you whilst cleaning t...
Page 6 - EMPTYING THE DUST CASSETTE
- 6 - - 6 - EMPTYING THE DUST CASSETTE Press down on door release pad and remove door. Remove the dust cassette from the cleaner using the handle grip on the front. Rotate the BLUE filter pack to the unlock position to release from the dust cassette. Turn the dust container and remove the BLUE-trans...
Page 7 - CLEANING THE FILTERS*
- 7 - - 7 - * Features vary according to model CLEANING THE FILTERS* Washing filter and foam: Washing pre-motor and exhaust filter: Rotate the BLUE filter pack until the unlock position to release it from the dust container. The pre-motor filter should be washed every three months. The Carbon filter...
Page 8 - CHANGING BELT OR BRUSHES
- 8 - If your cleaner is not picking up efficiently, the belt or brushes (or both) may need replacing, but first make sure you have:• Emptied the dust container• Cleaned filters• Checked for blockages Remove hood • Prise off the carpet care control selector• Remove hood screws A and B. • Lift off ho...
Page 9 - BEAB; Use only HOOVER spares; GUARANTEE STATEMENT
- - Environment - Weee Directive This appliance is marked according to the European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). By ensuring this product is disposed of correctly, you will help p revent po- tential negative consequences for the environment and human heal...
Page 10 - User checklist; Do not run cleaner over the supply cord
- 10 - ® User checklist If your cleaner is not working properly run through the following checklist. 1 Is there a working electricity supply to the cleaner? Check with another electrical product.2. Is the dust container full or choked with fine dust? To empty the dust container see the instructions ...