Hobart ML-134252 - Manuals

– 2 – © HOBART CORPORATION 1998, 2004 Installation, Operation and Care of MODEL 2912B SLICER SAVE THESE INSTRUCTIONS GENERAL The model 2912B slicer is equipped with a 1 / 2 HP motor and is available for single-phase electrical service. The slicer features the exclusive Hobart Clean Cut TM contoured ...

– 3 – INSTALLATION U N P A C K I N G Immediately after unpacking the slicer, check for possible shipping damage. If the slicer is found to bedamaged, save the packaging material and contact the carrier within 15 days of delivery. Prior to installing the slicer, test the electrical service to make su...

– 4 – Fig. 2 OPERATION SAFETY SAFETY DEVICES INCORPORATED IN THIS SLICER MUST BE IN THEIR CORRECT OPERATINGPOSITIONS ANY TIME THE SLICER IS IN USE. The Top Knife Cover (Fig. 2) must be in position and secured with the Latch Knob (Fig. 2). The RingGuard is not removable. The Deflector (Fig. 1), mount...