Hobart HBP77I ML-126387 - Manuals

Page 2 - TABLE OF CONTENTS

– 2 – TABLE OF CONTENTS GENERAL ............................................................................................................................................. 3 INSTALLATION ..................................................................................................................

Page 3 - PLEASE KEEP THIS MANUAL FOR FUTURE USE; GENERAL

– 3 – Installation, Operation and Care of MODEL HBP SERIES FOOD HOLDING AND TRANSPORT CABINETS PLEASE KEEP THIS MANUAL FOR FUTURE USE GENERAL Hobart Holding and Transport Cabinets are produced with quality workmanship and material. Properinstallation, usage, and maintenance of your cabinet will resu...

Page 4 - INSTALLATION; UNPACKING

– 4 – INSTALLATION Before installing, verify that the electrical service agrees with the specifications on the rating platelocated on the lower left corner. If the supply and equipment requirements do not agree, do not proceedwith the installation. Contact your Hobart servicer immediately. UNPACKING...

Page 5 - INSTALLATION CODES AND STANDARDS; The cabinet must be installed in accordance with:; In the United States of America:; State and local codes.; ELECTRICAL CONNECTIONS

– 5 – INSTALLATION CODES AND STANDARDS The cabinet must be installed in accordance with: In the United States of America: 1. State and local codes. 2. National Electrical Code, ANSI/NFPA-70 (latest edition). Copies may be obtained from The National Fire Protection Association, Batterymarch Park, Qui...

Page 6 - Electrical Table

– 6 – Electrical Table Model Voltage Amp Phase Hz NEMA Plug HBP4 110/120 10 1 60 5-15 208/240 5.4 6-15 HBP7 110/120 10 1 60 5-15 208/240 5.4 6-15 HBP13 110/120 10 1 60 5-15 208/240 5.4 6-15 HBP15 110/120 10 1 60 5-15 208/240 5.4 6-15 HBP40 110/120 16.7 1 60 5-20 208/240 9 6-15 HBP7I 110/120 10 1 60 ...

Page 7 - WIRING DIAGRAMS

– 7 – WIRING DIAGRAMS HBP4, HBP7, HBP13, HBP15, HBP40, HBP7I, HBP13I, HBP15I

Page 10 - OPERATION; CONTROLS

– 10 – OPERATION WARNING: THE CABINET AND ITS PARTS ARE HOT. BE VERY CAREFUL WHEN OPERATING,CLEANING OR SERVICING THE CABINET. CONTROLS Fig.1 All Models (Fig. 1) POWER INDICATOR LIGHT – Lit when power is supplied to cabinet. HEAT INDICATOR LIGHT – Lit when heat is supplied to cabinet. FULL RANGE THE...

Page 11 - OPERATING CABINET; Connect electric power supply.; Cabinet Temperatures

– 11 – OPERATING CABINET 1. Connect electric power supply. • Power indicator light is lit. 2. If cabinet is a HBP8HI, HBP12HI, or HBP15HI, press ON/OFF switch ON. • Interior air circulating fans start.• Control/component compartment cooling fans start. 3. Turn thermostat knob to desired setting. • H...

Page 12 - MAINTENANCE

– 12 – FORM 34136 Rev. A (11-98) PRINTED IN U.S.A. Shutdown If cabinet is a HBP8HI, HBP12HI, or HBP15HI, press ON/OFF switch OFF. Extended Shutdown Unplug electrical power supply. Power indicator light will go off. CLEANING WARNING: UNPLUG ELECTRICAL POWER SUPPLY BEFORE CLEANING. Clean cabinet inter...