Hobart 2812PS - Manuals - manualsarea.com

Page 2 - TABLE OF CONTENTS; USING THE MEMORY KEY:

– 2 – TABLE OF CONTENTS GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 UNPACKING . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

Page 3 - Model 2812PS Slicer with Portion Scale; SAVE THESE INSTRUCTIONS; GENERAL

– 3 – Installation, Operation, and Care of Model 2812PS Slicer with Portion Scale SAVE THESE INSTRUCTIONS GENERAL The Hobart Model 2812PS Slicer with Portion Scale displays the weight or slice count as the slicedproduct falls to the platter. Four preset values (P1 thru P4) can be programmed with wei...

Page 4 - INSTALLATION

– 4 – INSTALLATION UNPACKING Immediately after unpacking the slicer, check for possible shipping damage. If the slicer is found to bedamaged, save the packaging material and contact the carrier within 15 days of delivery. Prior to installing the slicer, test the electrical service to assure it agree...

Page 5 - OPERATION; SAFETY

– 5 – OPERATION SAFETY SAFETY DEVICES INCORPORATED IN THIS SLICER MUST BE IN THEIR CORRECT OPERATINGPOSITIONS ANYTIME THE SLICER IS IN USE. The T OP K NIFE C OVER must be in position and secured with the L ATCH K NOB (Fig. 2). The R ING G UARD is not removable. The D EFLECTOR , mounted below the sli...

Page 6 - NET; KEYS

– 6 – 1 2 3 4 R n PRESETS The four Preset keys (1 – 4) recall the last-entered portion mode and value anddisplay the preset indicator ( P1 , P2 , P3 , or P4 ). In WEIGHT mode, the slicer beeps when the preset weight is on the platter. In SLICE mode, the slicer beeps when the preset number of slices ...

Page 7 - before calling Service.

– 7 – POWER UP When the slicer is plugged in, the control checks its own circuitry, goes through a series of illuminateddisplays, and ends with the scale at zero in weight mode. SCALE PLATFORM AND PLATTER ASSEMBLY Proper assembly of the nylon scale platform and stainless steel scale platter is neces...

Page 8 - WEIGHT MODE; TARE; SLICE MODE

– 8 – WEIGHT MODE The scale is ready to weigh if the zero indicator is displayed when the platter is empty. Tare ispermitted. Once invoked, the Tare value is set for all WEIGHT mode operations: Manual mode, Presets (P1 – P4), and Memory (M). The Tare value can be changed or turned off at any time. I...

Page 9 - SLICE AND WEIGH MORE THAN ONE ITEM; FACTORY SETTINGS; MODE; Metric

– 9 – SLICING IN MANUAL MODE . . . without using the Presets (P1 – P4) or the Memory key In Weight Mode . . . Set the Tare, if needed. Set thickness. Slice product. The displayed weight will reflect the platter weight (less Tare, if NET was displayed). When the product is removed from the platter, t...

Page 12 - CLEANING

– 12 – CLEANING This machine must be thoroughly cleaned and sanitized after each day’s operation or after being idlefor an extended period of time. WARNING: THE SLICER KNIFE IS VERY SHARP.EXERCISE EXTREME CAUTION WHEN WORKINGNEAR THE KNIFE. WARNING: UNPLUG MACHINE POWER CORDAND TURN THE INDEX KNOB F...

Page 14 - MAINTENANCE; KNIFE SHARPENING

– 14 – MAINTENANCE KNIFE SHARPENING The Hobart cast stainless steel knife will provide long service in normal food retail or commercialkitchen use. However, in high volume applications where it is a practice to sharpen the knife frequentlyor even daily, the knife will be expended in a shorter time. ...