Hitachi ED-X52 - Manuals
Hitachi ED-X52 – Manual in PDF format online.
Manuals:
Manual Hitachi ED-X52
Summary
1 About The Symbols Various symbols are used in this manual, the user’s manual and on the productitself to ensure correct usage, to prevent danger to the user and others, and toprevent property damage. The meanings of these symbols are described below.It is important that you read these descriptions...
2 Safety Precautions WARNING Never use the projector if a problem should occur. Abnormal operations such as smoke, strange odor, no image, no sound,excessive sound, damaged casing or elements or cables, penetration ofliquids or foreign matter, etc. can cause a fire or electrical shock.In such case, ...
3 WARNING Be cautious of High temperatures of the projector. High temperatures are generated when the lamp is lit. It could result in fire orburn. Use special caution in households where children are present.Do not touch about the lens, air fans and ventilation openings during use orimmediately afte...
4 WARNING Be careful in handling the light source lamp. The projector uses a high-pressure mercury glass lamp made of glass.The lamp can break with a loud bang, or burn out. When the bulb bursts,it is possible for shards of glass to fly into the lamp housing, and for gascontaining mercury to escape ...
5 Safety Precautions (continued) CAUTION Be careful in moving the projector. Neglect could result in an injury or damage.• Do not move the projector during use. Before moving, disconnect thepower cord and all external connections, and close the slide lens door orattach the lens cap.• Avoid any impac...
7 Safety Precautions (continued) NOTE About consumables. Lamp, LCD panels, polarizors and other optical components, and air filter and cooling fanshave a different lifetime in each. These parts may need to be replaced after a long usagetime.• This product isn’t designed for continuous use of long ti...
8 • If the lamp should break (it will make a loud bang when it does), unplugthe power cord from the outlet, and make sure to request a replacementlamp from your local dealer. Note that shards of glass could damage theprojector’s internals, or cause injury during handling, so please do not try toclea...
9 Regulatory Notices FCC Statement Warning This device complies with part 15 of the FCC Rules. Operation is subject to the followingtwo conditions: (1) This device may not cause harmful interference, and (2) this devicemust accept any interference received, including interference that may cause unde...
2 Contents Contents Contents Introduction . . . . . . . . . . . . . . . 3 Features . . . . . . . . . . . . . . . . . . . . . . 3 Checking the contents of package . . . 3 Par t names . . . . . . . . . . . . . . . . 4 Projector . . . . . . . . . . . . . . . . . . . . . . 4Control panel . . . . . . . ....
3 Introduction • Keep the original packing materials, for future reshipment. Be sure to use the original packing materials when moving the projector. Use special caution for the lens. NOTE Introduction Introduction The projector provides you with the broad use by the following features. Checking the...
4 Par t names Part names Part names Projector (1) Lamp cover ( 56 ) The lamp unit is inside. (2) Focus ring ( 19 ) (3) Zoom ring ( 19 ) (4) Control panel ( 5 ) (5) Elevator buttons (x 2) ( 19 ) (6) Elevator feet (x 2) ( 19 ) (7) Remote sensor ( 12 ) (8) Lens ( 60 ) (9) Intake vents(10) Filter cover ...
5 Par t names Control panel (1) STANDBY/ON button ( 14 ) (2) INPUT button ( 16, 24 ) (3) MENU button ( 24 ) It consists of four cursor buttons. (4) BLANK button ( 23 ) (5) POWER indicator ( 11, 14, 62 ) (6) TEMP indicator ( 62 ) (7) LAMP indicator ( 62 ) Rear panel ( 9 ) (1) VIDEO port (2) S-VIDEO p...
6 Par t names Remote control (1) VIDEO button ( 17 ) (2) COMPUTER button ( 17 ) (3) SEARCH button ( 18 ) (4) STANDBY/ON button ( 14 ) (5) ASPECT button ( 18 ) (6) AUTO button ( 20 ) (7) BLANK button ( 23 ) (8) MAGNIFY - ON button ( 22 ) (9) MAGNIFY - OFF button ( 22 ) (10) MY SOURCE/DOC.CAMERA butto...
7 Setting up Install the projector according to the environment and manner the projector will be used in. Arrangement Refer to the illustrations and tables below to determine screen size and projection distance.The values shown in the table are calculated for a full size screen: 1024 x 768 a Screen ...
8 Setting up ► Place the projector in a stable horizontal position. If the projector falls or is knocked over, it could cause injury and/or damage to the projector. Using a damaged projector could then result in fi re and/or electric shock.• Do not place the projector on an unstable, slanted or vibra...
9 Setting up Connecting your devices Be sure to read the manuals for devices before connecting them to the projector. Make sure that all the devices are suitable to be connected with this product, and prepare the cables required to connect. Please refer to the following illustrations to connect them...
10 Setting up • Be sure to read the manuals for devices before connecting them to the projector, and make sure that all the devices are suitable to be connected with this product. Before connecting to a PC, check the signal level, the signal timing, and the resolution.- Some signal may need an adapt...
11 Setting up Connecting power supply 1. Put the connector of the power cord into the AC IN (AC inlet) of the projector. 2. Firmly plug the power cord’s plug into the outlet. In a couple of seconds after the power supply connection, the POWER indicator will light up in steady orange. ► Please use ex...
12 Remote control Remote control Remote control About the remote control signal The remote control works with the projector’s remote sensor. This projector has a remote sensor on the front.The sensor senses the signal within the following range when the sensor is active: 60 degrees (30 degrees to th...
13 Remote control Using as a simple PC mouse & keyboard The accessory remote control works as a simple mouse and keyboard of the PC, when the projector's USB port (B type) connects with the PC's USB port (A type) port via a mouse cable. (1) (3) (5) (2) (4) (6) VIDEO DOC.CAMERA KEYSTONE ASPECT SE...
14 Power on/off 1. Make sure that the power cord is fi rmly and correctly connected to the projector and the outlet. Tur ning on the power 2. Make sure that the POWER indicator is steady orange ( 62 ). Then remove the lens cover. 3. Press STANDBY/ON button on the projector or the remote control.The p...
15 Power on/off Precaution for lens cover attachment and removal When you attach or remove the lens cover, move it vertically up and down while keeping the knob to the right as illustrated in the fi gure.
16 Operating Operating Operating 1. Adjusting the volume Use the VOLUME + / VOLUME - buttons to adjust the volume. A dialog will appear on the screen to aid you in adjusting the volume. If you do not do anything, the dialog will automatically disappear after a few seconds. ● When is selected for cur...
17 VIDEO DOC.CAMERA KEYSTONE ASPECT SEARCH BLANK MUTE MY BUTTON POSITION 1 2 MENU COMPUTER MY SOURCE/ AUTO MAGNIFY PAGE UP VOLUME DOWN ON OFF 㧗 FREEZE Operating 1. Press VIDEO button on the remote control. Each time you press the button, the projector switches its input port from the current port ...
18 1. Press ASPECT button on the remote control. Each time you press the button, the projector switches the mode for aspect ratio in turn. Selecting an aspect ratio ● ASPECT button does not work when no proper signal is inputted. ● NORMAL mode keeps the original aspect ratio setting. 1. Press SEARCH...
19 Operating Adjusting the projector's elevator When the place to put the projector is slightly uneven to the left or right, use the elevator feet to place the projector horizontally. Using the feet can also tilt the projector in order to project at a suitable angle to the screen, elevating the fron...
20 Operating 1. Press POSITION button on the remote control when no menu is indicated.The “POSITION” indication will appear on the screen. Adjusting the position 2. Use the ▲ / ▼ / ◄ / ► cursor buttons to adjust the picture position. When you want to reset the operation, press RESET button on the re...
21 Operating 1. Press KEYSTONE button on the remote control. A dialog will appear on the screen to aid you in correcting the distortion. Correcting the keystone distor tions 2. Use the ▲ / ▼ cursor buttons to select AUTO or MANUAL operation, and press the ► button to perform the following. (1) AUTO ...
22 1. Press the MAGNIFY ON button on the remote control. The picture will be magnifi ed, and the MAGNIFY dialog will appear on the screen. When the MAGNIFY ON button is pressed for the fi rst time after the projector is turned on, the picture will be zoomed by 1.5 times. On the dialog, triangle marks ...
23 Operating 1. Press the BLANK button on the control panel or the remote control. The BLANK screen will be displayed instead of the screen of input signal. Please refer to BLANK item in SCREEN menu ( 39 ). To exit from the BLANK screen and return to the input signal screen, press BLANK button again...
24 Operating 1. To start the MENU, press the MENU button. The MENU you last used (EASY or ADVANCED) will appear. EASY MENU has priority to appear just after powered on. Using the menu function 2. (1) Use the ▲ / ▼ cursor buttons to select an item to operate. If you want to change it to the ADVANCED ...
25 Operating Using the menu function (continued) 3. To close the MENU, press the MENU button again or select EXIT and press the ◄ cursor button or ENTER button. Even if you do not do anything, the dialog will automatically disappear after about 30 seconds. ● If you want to move the menu position, us...
26 EASY MENU EASY MENU EASY MENU From the EASY MENU, items shown in the table below can be performed.Select an item using the ▲ / ▼ cursor buttons. Then perform it according to the following table. Item Description ASPECT Using the ◄ / ► buttons switches the mode for aspect ratio. See the ASPECT ite...
28 PICTURE menu PICTURE menu PICTURE menu From the PICTURE menu, items shown in the table below can be performed. Select an item using the ▲ / ▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. Item Description BRIGH...
30 PICTURE menu Item Description MY MEMORY This projector has 4 memories for adjustment data (for all the items of the PICTURE menu).Selecting a function using the ▲ / ▼ buttons and pressing the ► or ENTER button performs each function. SAVE-1 Ù SAVE-2 Ù SAVE-3 Ù SAVE-4 LOAD-4 Ù LOAD-3 Ù LOAD-2 Ù LO...
31 IMAGE menu IMAGE menu IMAGE menu From the IMAGE menu, items shown in the table below can be performed.Select an item using the ▲ / ▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. Item Description ASPECT Using t...
33 INPUT menu INPUT menu INPUT menu From the INPUT menu, items shown in the table below can be performed.Select an item using the ▲ / ▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. Item Description PROGRESSIVE Us...
36 SETUP menu SETUP menu SETUP menu From the SETUP menu, items shown in the table below can be performed.Select an item using the ▲ / ▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. Item Description AUTO KEYSTONE ...
37 SETUP menu Item Description ECO MODE Using the ▲ / ▼ buttons turns off/on the eco mode setting. BRIGHT Ù NORMAL • When the NORMAL is selected, acoustic noise and screen brightness are reduced. MIRROR Using the ▲ / ▼ buttons switches the mode for mirror status. NORMAL Ù H:INVERT Ù V:INVERT Ù H&...
38 AUDIO menu AUDIO menu AUDIO menu From the AUDIO menu, items shown in the table below can be performed. Select an item using the ▲ / ▼ cursor buttons, and press the ► cursor button or the ENTER button to execute the item. Then perform it according to the following table. Item Description VOLUME Us...
39 SCREEN menu SCREEN menu SCREEN menu From the SCREEN menu, items shown in the table below can be performed.Select an item using the ▲ / ▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. Item Description LANGUAGE U...
45 OPTION menu OPTION menu OPTION menu From the OPTION menu, items shown in the table below can be performed.Select an item using the ▲ / ▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item, except for the items LAMP TIME and FILTER TIME. Then perform it according to ...
47 OPTION menu Item Description MY BUTTON You can use this item to assign one of the following functions to the BLANK button on the control panel ( 5 ) and the MY BUTTON 1/2 buttons on the remote control ( 6 ). (1) Choose a button to assign a function from BLANK, MY BUTTON-1 and MY BUTTON-2. Use the...
50 SECURITY menu This projector is equipped with security functions.From the SECURITY menu, items shown in the table below can be performed.To use SECURITY menu: User registration is required before using the security functions. Enter the SECURITY menu 1. Use the ▲ / ▼ buttons on the SECURITY menu t...
51 SECURITY menu Item Description MyScreen PASSWORD The MyScreen PASSWORD function can be used to prohibit access to the MyScreen function and prevent the currently registered MyScreen image from being overwritten. 1 Turning on the MyScreen PASSWORD 1-1 Use the ▲ / ▼ buttons on the SECURITY menu to ...
56 Maintenance Maintenance Maintenance A lamp has fi nite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them.Preparation of a new lam...
57 Maintenance Lamp war ning Replacing the lamp (continued) HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE ► The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a d...
58 Maintenance The air fi lter unit of this projector consists of a fi lter cover, two kinds of fi lters, and a fi lter frame. The new double large fi lters system is expected to function longer. However, please check and clean it periodically to keep ventilation needed for normal operation of the projec...
59 Maintenance Cleaning and replacing the air fi lter (continued) 9. Turn the projector on and reset the fi lter time using the FILTER TIME item in the EASY MENU. ► Before taking care of the air fi lter, make sure the power cable is not plugged in, then allow the projector to cool suffi ciently. Taking ...
60 Maintenance Other care In order to ensure the safe use of your projector, please have it cleaned and inspected by your dealer about once every year. 1. Turn the projector off, and unplug the power cord. Allow the projector to cool suffi ciently. 2. After making sure that the projector is cool adeq...
61 Troubleshooting Troubleshooting Troubleshooting If an abnormal operation should occur, stop using the projector immediately. Otherwise if a problem occurs with the projector, the following checks and measures are recommended before requesting repair.If this does not resolve the problem, please co...
62 Troubleshooting Regarding the indicator lamps When operation of the LAMP , TEMP and POWER indicators differs from usual, check and cope with it according to the following table. POWER indicator LAMP indicator TEMP indicator Description Lighting In Orange Turned off Turned off The projector is in ...
63 Troubleshooting Regarding the indicator lamps (continued) • When the interior portion has become overheated, for safety purposes, the projector is automatically shut down, and the indicator lamps may also be turned off. In such a case, disconnect the power cord, and wait at least 45 minutes. Afte...
64 Troubleshooting Phenomena that may be easy to be mistaken for machine defects About the phenomenon confused with a machine defect, check and cope with it according to the following table. Phenomenon Cases not involving a machine defect Reference page Power does not come on. The electrical power c...
66 Phenomenon Cases not involving a machine defect Reference page Pictures appear dark. The brightness and/or contrast are adjusted to an extremely low level. Adjust the BRIGHTNESS and/or CONTRAST settings to a higher level using the menu function. 28 The ECO MODE function is working. Select the BRI...
67 Specifi cations Specifications Specifi cations Specifi cations Item Specifi cation Product name Liquid crystal projector Liquid Crystal Panel 786,432 pixels (1024 horizontal x 768 vertical) Lamp 200 W UHB Speaker 1 W Power supply AC 100-120 V/2.9 A, AC 220-240 V/1.4 A Power consumption AC 100-120 V/29...
2 First of all Entries and graphical symbols explanation The following entries and graphical symbols are used for the manuals and the product as follows, for safety purpose. Please know their meanings beforehand, and heed them. Impor tant safety instruction The followings are important instructions ...
3 ENGLISH Regulator y notices About Electro-Magnetic Interference In CANADA This Class B digital apparatus complies with Canadian ICES-003. In the US, and other places where the FCC regulations are applicable Declaration of Conformity Trade name HITACHI Model Number ED-X50, ED-X52 Responsible Party ...
4 Contents of package Your projector should come with the items shown below. Check that all the items are included. Require of your dealer immediately if any items are missing. (1) Remote control with two AA batteries (2) Power cord (3) Computer cable(4) Lens cover(5) User’s manuals (Book x1, CD x1)...
5 ENGLISH Preparations Loading batteries into the remote control Please insert the batteries into the remote control before using it. If the remote control starts to malfunction, try to replace the batteries. If you will not use the remote control for long period, remove the batteries from the remot...
6 On a horizontal surface Suspended from the ceiling • Keep a space of 30 cm or more between the sides of the projector and other objects such as walls. Do not place or attach anything that would block the lens or vent holes.• For the case of installation in a special state such as ceiling mount, th...
8 Connecting power supply 1. Put the connector of the power cord into the AC IN (AC inlet) of the projector. 2. Firmly plug the power cord’s plug into the outlet. In a couple of seconds after the power supply connection, the POWER indicator will light up in steady orange. Please remember that when t...
9 ENGLISH Adjusting the projector's elevator When the place to put the projector is slightly uneven to the left or right, use the elevator feet to place the projector horizontally. Using the feet can also tilt the projector in order to project at a suitable angle to the screen, elevating the front s...
10 Displaying the picture 1. Activate your signal source. Turn the signal source on, and make it send the signal to the projector. 2. Use the VOLUME + / VOLUME - buttons to adjust the volume. To have the projector silent, press the MUTE button on the remote control. 3. Press the INPUT button on the ...
15 ENGLISH Using the CD manual The other manuals for this product are written into the included CD-ROM titled “User’s Manual (detailed)”. Before using the CD-ROM, please read the following to ensure the proper use. System requirements The system for using the CD-ROM requires the following. Windows ®...
17 ENGLISH Troubleshooting - Warranty and after-ser vice If an abnormal operation (such as smoke, strange odor or excessive sound) should occur, stop using the projector immediately. Otherwise if a problem occurs with the projector, fi rst refer to the “Troubleshooting” of the “Operating Guide” in th...
1 Projector ED-X50/ED-X52 User's Manual (detailed)Operating Guide – Technical Resolution (H x V) H. frequency (kHz) V. frequency (Hz) Rating Signal mode 720 x 400 37.9 85.0 VESA TEXT 640 x 480 31.5 59.9 VESA VGA (60Hz) 640 x 480 37.9 72.8 VESA VGA (72Hz) 640 x 480 37.5 75.0 VESA VGA (75Hz) 640 x 480...
2 Initial set signals Initial set signals Initial set signals The following signals are used for the initial settings. The signal timing of some PC models may be different. In such case, adjust the items V POSITION and H POSITION in the IMAGE menu. Resolution (H x V) Horizontal signal timing ( μ s) ...
3 A COMPUTER IN1, B COMPUTER IN2, C MONITOR OUT D-sub 15pin mini shrink jack <Computer signal>• Video signal: RGB separate, Analog, 0.7Vp-p, 75 Ω terminated (positive) • H/V. sync. signal: TTL level (positive/negative)• Composite sync. signal: TTL level <Component video signal>• Video si...
5 Connection to the por ts (continued) F AUDIO IN1, G AUDIO IN2 Ø3.5 stereo mini jack • 200 mVrms 47k Ω terminator H AUDIO OUT Ø3.5 stereo mini jack • 200 mVrms 1k Ω output impedance G H F
7 To input component video signal to COMPUTER IN ports ex. Connection to the por ts (continued) To input component video signal to the COMPUTER IN1 or IN2 port of the projector, use a RCA to D-sub cable or adapter. For about the pin description of the required cable or adapter, refer to the descript...
8 RS-232C Communication RS-232C Communication RS-232C Communication When the projector connects to the computer by RS-232C communication, the projector can be controlled with RS-232C commands from the computer. For details of RS-232C commands, refer to RS-232C Communication command table ( 10 ). Con...
9 RS-232C Communication (continued) Communication settings 1. Protocol 19200bps,8N1 2. Command for mat ("h" shows hexadecimal) Byte Number 0 1 2 3 4 5 6 7 8 9 10 11 12 Command Action Header Data Header code Packet Data size CRC fl ag Action Type Setting code L H L H L H L H L H L H <SET>...
17 Names Operation Type Header Command Data CRC Action Type Setting Code LANGUAGE * Set ENGLISH BE EF 03 06 00 F7 D3 01 00 05 30 00 00 FRANÇAIS BE EF 03 06 00 67 D2 01 00 05 30 01 00 DEUTSCH BE EF 03 06 00 97 D2 01 00 05 30 02 00 ESPAÑOL BE EF 03 06 00 07 D3 01 00 05 30 03 00 ITALIANO BE EF 03 06 00...
Hitachi Manuals
-
Hitachi WH14DBL
User Manual
-
Hitachi DS14DSFL
User Manual
-
Hitachi L32A104
User Manual
-
Hitachi L32A104
Manual
-
Hitachi CG22EADSL
User Manual
-
Hitachi CG22EASSLP
User Manual
-
Hitachi CG22EAD
User Manual
-
Hitachi CS33EB
User Manual
-
Hitachi C10FCH2
User Manual
-
Hitachi CG22EASL
User Manual
-
Hitachi WH18DSDL
User Manual
-
Hitachi LE49S508
User Manual
-
Hitachi LE49S508
Manual
-
Hitachi CG22EABL
User Manual
-
Hitachi L46S604
User Manual
-
Hitachi L46S604
Manual
-
Hitachi C10FCE2
User Manual
-
Hitachi CG22EASS
User Manual
-
Hitachi CG23ECPSL
User Manual
-
Hitachi DB3DL2
User Manual