Page 2 - TO INSTALL THE HANDLE; Insert the handle
-1- PART INDENTIFICATION HOW TO OPERATE TO INSTALL THE HANDLE (Fig. 2) 1. Insert the handle 1 into the opening on the top of the cleaner and ) tighten screw 2 2) Fix the handle cover to handle firmly. When you take it off, insert a screwdriver (straight type) in the side hole of handle cover and det...
Page 4 - When the orange sign; CARRYING HANDLE; on the back of the cleaner or roll; EDGE CLEANING
-3- AUTOMATIC HEIGHT CONTROL (Fig. 6) The HITACHI vacuum cleaner has an automatic height control, which adjusts thenozzle to the proper height of any carpet pile. DUST COMPARTMENT OPERATION (Fig. 7) When the orange sign 6 appears continuously in the window, empty the dust compartment.Never allow the...
Page 5 - HOW TO USE TOOLS
-4- HOW TO USE TOOLS (Fig. 10, 11, 12) Use the tools you require for cleaning hard floors, fabricsand curtains etc.1. Ensure the cleaner is in the upright position.2. Hold the dusting brush 8 and the extension pipe 9 as shown in Fig.10, and disconnect the dusting brush fromthe extension pipe. 3. Tur...
Page 6 - HOW TO CLEAR A BLOCKAGE; Be sure to disconnect the plug from the electrical outlet.; G I
-5- HOW TO CLEAR A BLOCKAGE If your cleaner is used when the dust compartment is full or if any blockages aresucked in by accident, the air ducts may become clogged. If this occurs, remove theblockages or obstructions from the air ducts as follows. CAUTION: Be sure to disconnect the plug from the el...
Page 7 - ) When you remove the dust compartment from the body, don; Filter care; If detergent is used, rinse it out thoroughly.
-6- How to empty the dust compartment 1) Empty the dust compartment before dust reaches the max line.2) If you continue using the cleaner, the suction power will be diminished due to dust clogging the filter. 3) Please remove the dust. NOTE: Switch off the power and remove the mains plug from the so...
Page 10 - HOW TO MAINTAIN CLEANING EFFICIENCY; Empty the dust compartment before it is filled excessively.; TO AVOID ACCIDENTS; Keep fingers, hands, feet and hair away from revolving rotary brush.; Electric shock could occur if used outdoors or on wet surfaces.
-9- HOW TO MAINTAIN CLEANING EFFICIENCY ● The plug of the power supply cord should be removed from the socket outletbefore cleaning the appliance or undertaking maintenance operations. ● The supply cord on this appliance can only be replaced by the use of specialtools and if it is damaged the applia...
Page 11 - IMPORTANT
-10- IMPORTANT The mains lead on this equipment is supplied with a moulded plugincorporating a fuse, the value of which is indicated on the pin face of theplug. Should the fuse need to be replaced, an ASTA or BSI approvedBS 1362 fuse must be used of the same rating. If the fuse cover isdetachable ne...
Page 12 - Hitachi Atago Building,
Hitachi Home & Life Solutions, Inc. Hitachi Atago Building, No.15-12, Nishi Shimbashi, 2- chome, Minato-ku, Tokyo, 105-8410 Japan Tel: 03 3502 2111 www.hitachi-consumer-eu.com IBEUROPE HEL H&L 2/04 3-J9158-2A HITACHI EUROPE LTD. Digital Media GroupWhitebrook ParkLower Cookham RoadMaidenheadB...