Hitachi CP-X950W - Manuals

8 ON LAMP TEMP STANDBY /ON INPUT MUTE ZOOM F O C U S M E N U R E S E T ON LAMP TEMP STANDBY /ON INPUT MUTE ZOOM FOCUS MENU RESET S-VIDEO VIDEO AUDIO L R AC SW AC IN AUDIO IN AUDIO OUT RGB IN RGB OUT CONTROL Names and functions of each part Main unit • Use the remote control transmitter within the ra...

9 Names and functions of each part (continued) Remote control transmitter MUTE button Silences the sound. (Cancels the mutewhen the unit is set in mute mode.) VOLUME button Adjusts volume. The sound is loud orlow while pressing the “+” or “–” button. LASER ON Laser pointer ON/OFF button.Use as a sti...

11 Installation Example of the projector and screen installation Determine picture size and projection distance as illustrated below. How to use foot adjusters 1. Lift up the projector, unlock the foot adjusters.2. Adjust a viewing angle, and then lock the foot adjusters complete.3. To adjust the an...

12 Basic operations To project the picture 1 Turn the MAIN POWER switch of the projector on. [ I : ON] •The ON indicator will light up orange. 2 Press the STANDBY/ON button. •The ON indicator blinks (green) and then lights (green).•The ON indicator will blink green during warm-up and light up. 3 Tur...

13 Basic operations (continued) To turn off the power 1 Press the STANDBY/ON button, for 1 second. •The ON indicator lights up orange and the lamp turns off. (About 1 minute later), the fan stops and the indicator blinks orange. •Press the STANDBY/ON button for short time (less than 1 second), the p...

14 Adjustments and functions Memory function Individual memory functions are provided for the VIDEO1, VIDEO2, RGB1 and RGB2 input terminals.Adjustments are saved after power off. 1 Press the MENU ( ) buttons or the MENU ON / OFF button. •On-screen menus are displayed on the screen. 2 Select the menu...

15 SET UP The menu SET UP serves for the change of parameters influencing the picture and for the move pictureposition. RGB signal input VIDEO signal input Caution • Menu items cannot be adjusted, while displaying the start up screen (“NO INPUT IS DETECTED” or “SYNC IS OUT OF RANGE”). • TINT cannot ...

16 Adjustments and functions (continued) INPUT The menu INPUT serves for the selection of input source. S E T U P I N P U T I M A G E O P T . RGB1RGB2VIDEO1VIDEO2TESTPATTERN S E T U P I N P U T I M A G E O P T . RGB1RGB2VIDEO1VIDEO2TESTPATTERN AUTONTSCPALSECAMNTSC4.43M-PAL S Y S T E M Adjustment Ite...

19 Connection to the video signal terminals 1. Input signal S-VIDEO signal VIDEO signal AUDIO signal Input Output 2. Signal input terminal Connection to the RGB signal terminal 1. Input / output signal Video signal Horizontal sync signal Vertical sync signal Composite sync signal Audio signal Input ...

20 Connection to the RGB signal terminal (continued) 3. Example of computer signal Resolution H × V 640 × 350 640 × 400 640 × 400 640 × 480 640 × 480 640 × 480 640 × 480 640 × 480 800 × 600 800 × 600 800 × 600 800 × 600 800 × 600 832 × 624 1024 × 768 1024 × 768 1024 × 768 1152 × 864 1280 × 960 1280 ...

22 Connection to the control signal terminal 1. Control signal terminal Pin No . 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 RS232C SELO R T S GND RDP TDP Caution Turn off the power of both the projector and computer before connecting.Connect the computer to the control terminal of the projector using an ap...

23 Connection to the control signal terminal (continued) PS/2 mouse ADB (Mac) mouse 123456789 10 11 12 131415 CLK DATA RTS SEL0 GND 123456 DATA +5V GND CLK Computer Projector 6 3 4 2 1 Mini Din 6pin PS/2 cable +5V 5 Serial mouse (option CP-X950W) 123456789 10 11 12 131415 DATA RTS GND 1234 ADB +5V G...

27 Example of system setup Connecting various equipment. Caution Turn power off to all devices before connecting.Refer to the instruction manual of each device before connecting. Cleaning the air filter Clean the air filter about every 100 hours or when “CHECK THE AIR FLOW” is displayed. 1 Turn off ...

28 Cleaning the air filter (continued) 3 Clean the air filter using a vacuum cleaner. If dirt is still present, wipe the air filter with a cloth moistened with water or neutral detergent and wipewith a dry cloth. 4 Re-install the air filter. Caution • If air filter is stutted with dust, etc., protec...

29 ON indicator LAMP indicator TEMP indicator Indicator status Lights orange Blinks green Lights green Blinks orange Lights red Lights red Lights red Blinks red Meaning Standby mode During warming up During operation During cooling down Under the mode Lamp cannot light Temperature inside too high Co...

30 Specifications • All specifications are subject to change without notice. Liquid crystalpanel Input/Outputterminal Product name Model Name Display system Panel size Drive system Number of pixels Lens Lamp Speaker Power supply Power consumption Usable temperature range Dimensions (W × H × D) Weigh...