Hitachi CP-X615 - Manuals

5 2. Equipment connection and network setting 2.2 Manual network connection setting 2.2.1 Equipments connection Connect the projector and PC with a LAN cable. * Before connecting with an existing network, contact the network administrator. Next, please check the PC setting as explained below. 2.2.2 ...

7 2. Equipment connection and network setting 2.2 Manual network connection setting (continued) [About IP address] ■ Setting manually The Network address portion included in the IP address set into your PC should be common with projector’s one. And the entire IP address in the PC should not be overl...

8 2. Equipment connection and network setting 2.2 Manual network connection setting (continued) 2) Click “Connections” tab and then click [LAN Settings] button to open “Local Area Network (LAN) settings”. (Fig. 2.2.3.c) Fig. 2.2.3.b “Internet Properties” window 2.2.3 “Internet Option” setting 1) Cli...

9 2. Equipment connection and network setting 2.2 Manual network connection setting (continued) Fig. 2.2.4 “Logon Menu” 2.2.4 Check connection Check PC and projector are connected properly here. If it is not connected, check cable connections and settings are properly or not. 1) Start browser in PC ...

0 3. Management with Web browser software Configuring and Controlling the Projector via a Web Browser You can change the settings of or control the projector via a network by using a web browser from a PC that is connected to the same network. (  11 ) E-mail Alerts The projector can automatically s...

3. Management with Web browser software 3.1 Configuring and controlling the projector via a web browser You can adjust or control the projector via a network from a web browser on a PC that is connected to the same network. • Internet Explorer 5.5 or later is required. • If JavaScript is disabled in...

3. Management with Web browser software When configuring or controlling the projector via a web browser, an ID and password are required. There are two types of IDs, Administrator ID and User ID. The following chart describes the differences between Administrator and User IDs. 3.1 Configuring and co...

3 3. Management with Web browser software 3.1 Configuring and controlling the projector via a web browser (continued) 3.1.1 Logon Refer to the following for configuring or controlling the projector via a web browser. 1) Enter “http://192.168.1.10/” into the address bar of the web browser and press “...

4 3.1 Configuring and controlling the projector via a web browser (continued) 3.1.2 Network Information All screen drawings in this manual are shown when you logon with the Administrator ID. Any functions that are available only for the Administrator will not be shown when you logon with the User ID...

5 3. Management with Web browser software 3.1 Configuring and controlling the projector via a web browser (continued) 3.1.3 Network Settings Displays and configures network settings. Item Description IP Configuration Configures network settings. DHCP ON Enables DHCP. DHCP OFF Disables DHCP. IP Addre...

3.1 Configuring and controlling the projector via a web browser (continued) 3. Management with Web browser software • The new configuration settings are activated after restarting the network connection. When the configuration settings are changed, you must restart the network connection. You can re...

7 3. Management with Web browser software 3.1 Configuring and controlling the projector via a web browser (continued) 3.1.4 Port Settings Displays and configures communication port settings. Item Description Network Control Port1 (Port:23) Configures command control port 1 (Port:23). Port open Click...

8 3.1 Configuring and controlling the projector via a web browser (continued) 3.1.5 Mail Settings 3. Management with Web browser software Displays and configures e-mail addressing settings. Item Description Send mail Click [Enable] check box to use the e-mail function. Configure the conditions for s...

9 3.1 Configuring and controlling the projector via a web browser (continued) 3.1.6 Alert Settings Displays and configures failure & alert settings. Alert Item Description Cover Error The lamp cover has not been properly fixed. Fan Error The cooling fan is not operating. Lamp Error The lamp does...

0 3.1 Configuring and controlling the projector via a web browser (continued) 3. Management with Web browser software The Alert Items are shown below. Setting Item Description Alarm Time Configures the time to alert. (Only Lamp Time Alarm and Filter Time Alarm.) SNMP Trap Click [Enable] check box to...

3.1 Configuring and controlling the projector via a web browser (continued) 3.1.7 Schedule Settings Displays and configures schedule settings. Item Description Daily Configures the daily schedule. Sunday Configures the Sunday schedule. Monday Configures the Monday schedule. Tuesday Configures the Tu...

3 3. Management with Web browser software 3.1 Configuring and controlling the projector via a web browser (continued) 3.1.8 Date/Time Settings Displays and configures the date and time settings. Item Description Current Date Configures the current date in year/month/day format. Current Time Configur...

5 3. Management with Web browser software 3.1 Configuring and controlling the projector via a web browser (continued) 3.1.9 Security Settings Displays and configures passwords and other security settings. Item Description Administrator authority Configures the Administrator ID and password. Administ...

3.1 Configuring and controlling the projector via a web browser (continued) 3. Management with Web browser software Click [Apply ] button to save the settings. • The new configuration settings are activated after restarting the network connection. When the configuration settings are changed, you mus...

7 3. Management with Web browser software 3.1 Configuring and controlling the projector via a web browser (continued) 3.1.10 Projector Control Controls the projector. Item Description Main Power Turns the power on/off. Input Source Selects the input source. Picture Mode Selects the picture mode sett...

9 3.1 Configuring and controlling the projector via a web browser (continued) 3. Management with Web browser software Item Description Audio Volume Adjusts the volume setting. Treble Adjust the Treble setting. Bass Adjusts the Bass setting. SRS WOW Selects the SRS WOW setting. Speaker Turns the buil...

30 3.1 Configuring and controlling the projector via a web browser (continued) 3.1.11 Projector Status 3. Management with Web browser software Displays and configures the current projector status. Item Description Error Status Displays the current error status Lamp Time Displays the usage time for t...

3 3.1 Configuring and controlling the projector via a web browser (continued) 3. Management with Web browser software 3.1.12 Network Restart Restarts the projector’s network connection. Item Description Restart Restarts the projector’s network connection in order to activate new configuration settin...

3 3. Management with Web browser software 3.2 E-mail Alerts The projector can automatically send an alert message to the specified e-mail addresses when the projector detects a certain condition that is requiring maintenance or detected an error. • Up to five e-mail addresses can be specified. • The...

33 3.2 E-mail Alerts (continued) 3. Management with Web browser software 8) Click [Alert Settings] on the main menu to configure the E-mail Alerts settings. 9) Select and configure each alert item. Refer to the item 3.1.6 Alert Settings (  19 ) for further information. 10) Click [Apply] button to s...

34 3. Management with Web browser software 3.3 Projector Management using SNMP The SNMP (Simple Network Management Protocol) enables to manage the projector information, which is a failure or warning status, from the computer on the network. The SNMP management software will be required on the compu...

35 3. Management with Web browser software 3.4 Event Scheduling The scheduling function enables to setup scheduled events including power on / power off. It enables to be “self-management” projector. • You can schedule the following control events: Power ON/OFF, Input Source and Transferred Image Di...

37 3. Management with Web browser software • A Network Restart is required after the Daylight Savings Time or SNTP configuration settings have been changed. • The battery for the built in clock may be dead if the clock loses time even when the date and time have been set correctly. Replace the batte...

38 3. Management with Web browser software 3.5 e-SHOT (Still Image Transfer) Display The projector can display still images that are transferred via the network. • It is possible to allocate the image file up to 4 in the maximum. • The image file also can be displayed by using schedule function from...

39 3.5 e-SHOT (Still Image Transfer) Display (continued) Configure the following items from a web browser when e-SHOT is used. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter "http://192.168.1.10/" into the address bar of the web browser. 2) Enter the Administrat...

40 3. Management with Web browser software 3.6 Command Control via the Network You can configure and control the projector via the network using RS-232C commands. Communication Port The following two ports are assigned for the command control. Command Control Settings (  17 ) Configure the followin...

4 3. Management with Web browser software 3.6 Command Control via the Network (continued) When the authentication setting is enabled, the following settings are required. (  25 ) 7) Click [Security Settings] on the main menu. 8) Click [Network Control] and enter the desired authentication password....

4 3. Management with Web browser software 3.6 Command Control via the Network (continued) Command Format Command formats differ among the different communication ports. ● TCP #23 You can use the RS-232C commands without any changes. The reply data format is the same as the RS-232C commands. However,...

43 Reply Data format The connection ID (the data is same as the connection ID data on the sending data format) is attached to the RS-232C commands reply data. <ACK reply> Reply Connection ID 0x06 byte <NAK reply> Reply Connection ID 0x15 byte <Error reply> Reply Error code Connecti...

44 3. Management with Web browser software 3.6 Command Control via the Network (continued) Automatic Connection Break The TCP connection will be automatically disconnected after there is no communication for 30 seconds after being established. The projector does not accept commands without authentic...