Hitachi CP-X608 - Manuals - manualsarea.com

Page 2 - Content; Air filter

About this manual . . . . . . . . . . 1 Content . . . . . . . . . . . . . . . . . . 2 Projector features . . . . . . . . . . 3 Preparations . . . . . . . . . . . . . . 3 Contents of package . . . . . . . . . . . . .3 Fastening the lens cover . . . . . . . . . .3 Part names . . . . . . . . . . . . . ...

Page 3 - Fastening the lens cover; Projector features / Preparations; Projector features; NOTE; Strap hole

3 Fastening the lens cover To avoid losing the lens cover, please fasten the lens cover to the projector using the included strap. . Fix the strap to the strap hole of the lens cover. . Put one side of the strap into the groove on the rivet. 3. Push the rivet into the rivet hole. Projector features ...

Page 4 - Part names; The lamp unit is inside.; WARNING

4 Part names Part names Projector () Speakers (x 4) (  38 ). () Focus ring (  20 ) (3) Zoom ring (  20 ) (4) Lamp cover (  59 ) The lamp unit is inside. (5) Lens shift cover (  20 ) (6) Horizontal lens shift dial (  20 ) (7) Vertical lens shift dial (  20 ) (8) Front cover (9) Lens (  64 ) (...

Page 5 - Control panel; It consists of four cursor buttons.; Rear panel; The SD card slot is inside.; CAUTION

5 Part names Control panel () STANDBY/ON button (  17 ) () MENU button (  24 ) It consists of four cursor buttons. (3) INPUT button (  18 ) (4) POWER indicator (  17 ) (5) TEMP indicator (  66 ) (6) LAMP indicator (  66 ) Rear panel () Shutdown switch (  68 ) () Security slot (  9 ) (3) Secu...

Page 6 - Remote control; Cursor button ▲ : to slide toward the side marked ▲.; Back of

6 Part names Remote control () Laser pointer (  14 ) It is a beam outlet. () LASER INDICATOR (  14 ) (3) LASER button (  14 ) (4) STANDBY/ON button (  17 ) (5) VOLUME button (  18 ) (6) MUTE button (  18 ) (7) VIDEO button (  19 ) (8) RGB button (  18 ) (9) SEARCH button (  19 ) (0) AUTO bu...

Page 7 - Setting up

7 Setting up Setting up Install the projector according to the environment and manner the projector will be used in. WARNING ► Place the projector in a stable horizontal position. If the projector falls or is knocked over it could cause injury and/or damage to the projector. Using a damaged projecto...

Page 8 - Arrangement; On a horizontal

8 Arrangement Refer to the illustrations and tables below to determine screen size and projection distance.The values shown in the table are calculated for a full size screen: 04×768 (a) Screen size (diagonal) (b) Projection distance (±0%) (c) Screen height (±0%), when the vertical lens shift (  20...

Page 9 - Adjusting the projector's elevator; Using the security bar and slot; To finely adjust, twist

9 Adjusting the projector's elevator When the place to put the projector is slightly uneven to the left or right, use the elevator feet to place the projector horizontally. Using the feet can also tilt the projector in order to project at a suitable angle to the screen, elevating the front side of t...

Page 10 - Connecting your devices; prepare the cables required to connect.; BLANK

0 Setting up Connecting your devices Be sure to read the manuals for devices before connecting them to the projector. Make sure that all the devices are suitable to be connected with this product, and prepare the cables required to connect. Please refer to the following illustrations to connect them...

Page 12 - Inserting an SD card and USB memory; Wireless

Setting up Inserting an SD card and USB memory When using the projector with a wireless LAN please insert the included wireless network card. When using a commercial SD memory card in order to view images insert the SD memory card in the same manner. And when using a commercial USB memory in order t...

Page 13 - How to use the slot cover lock; AC inlet

3 Setting up How to use the slot cover lock . Open the slot cover lock, and insert it into the locking a slot. . Close the slot cover lock slowly, and attach a padlock or combination lock to the slot cover lock. Connecting power supply . Connect the connector of the power cord to the AC inlet of the...

Page 14 - Putting batteries; and the LASER INDICATOR lights while the LASER button is pressed.; LASER INDICATOR

4 Remote control Putting batteries Please load the batteries before using the remote control. If the remote control starts to malfunction, replace the batteries. If you will not use the remote control for an extended period, remove the batteries from the remote control and store them in a safe place...

Page 15 - The front and top sensors:

5 Changing the frequency of remote control signal The accessory remote control has the choice of the mode or the mode , in the frequency of its signal. If the remote control does not function properly, attempt to change the signal frequency. Please remember that the “REMOTE FREQ.” in SERVICE item of...

Page 16 - Using as a wired remote control; Using as a simple PC mouse & keyboard; Sliding toward the side marked ▲ works instead of the

6 Using as a wired remote control The accessory remote control works as a wired remote control, when the wired control port at the bottom of the remote control connects with the REMOTE CONTROL port on the back of the projector via an audio cable with 3.5 diameter stereo mini plugs. When the remote c...

Page 17 - Turning on the power; Make sure that the power cord is firmly and correctly; Turning off the power

7 Power on/off WARNING ► A strong light is emitted when the projector’s power is on. Do not look into the lens of the projector or look inside of the projector through any of the projector’s openings. ► Do not touch around the lamp cover and the exhaust vents during use or just after use, since it i...

Page 18 - Operating; Use the cursor buttons ▲/▼ to adjust the volume.; Temporarily muting the sound

8 Operating Operating Adjusting the volume . Press the VOLUME button on the remote control. A dialog will appear on the screen to aid you in adjusting the volume. . Use the cursor buttons ▲/▼ to adjust the volume. To close the dialog and complete the operation, press the VOLUME button again. Even if...

Page 19 - Searching an input signal; find any input signals.; port first. If no input; Selecting an aspect ratio; For an RGB or MIU signal

9 Operating Searching an input signal . Press the SEARCH button on the remote control.The projector will start to check its input ports in order to find any input signals. When an input is found, the projector will stop searching and display the image. If no signal is found, the projector will retur...

Page 20 - Adjusting the zoom and focus; Focus ring; Adjusting the lens shift; Top

0 Adjusting the zoom and focus . Use the zoom ring to adjust the screen size. . Use the focus ring to focus the picture. Operating Focus ring Zoom ring Adjusting the lens shift . Use the vertical lens shift dial to shift the picture upward or downward. . Use the horizontal lens shift dial to shift t...

Page 21 - Adjusting the position; Correcting the keystone distortions; Use the cursor buttons ◄/► to select the direction to correct

Adjusting the position . Press the POSITION button on the remote control. The “POSITION” indication will appear on the screen. . Use the cursor buttons ▲/▼/◄/► to adjust the picture position. When you want to reset the operation, press the RESET button on the remote control during the operation.To c...

Page 22 - Using the magnify feature; Use the cursor buttons ▲/▼ to adjust the zoom level.; Freezing the screen

Operating Using the magnify feature . Press the ON button of MAGNIFY on the remote control. The “MAGNIFY” indication will appear on the screen (although the indication will disappear in several seconds with no operation), and the projector will go into the MAGNIFY mode. . Use the cursor buttons ▲/▼ ...

Page 23 - Temporarily blanking the screen

3 Operating Temporarily blanking the screen . Press the BLANK button on the remote control. The blank screen will be displayed instead of the screen of input signal. Please refer to the BLANK item in SCREEN menu (  39 ). To exit from the blank screen and return to the input signal screen, press the...

Page 24 - Using the menu function; In the EASY MENU; RESET button

4 Operating Using the menu function This projector has the following menus: PICTURE, IMAGE, INPUT, SETUP, AUDIO, SCREEN, OPTION, MIU, and EASY MENU. EASY MENU consists of functions often used, and the other menus are classified into each purpose. Each of these menus is operated using the same method...

Page 25 - EASY Menu; Using the ◄/► buttons switches the mode for aspect ratio.; From the EASY MENU, items shown in the table below can

5 EASY Menu EASY Menu Item Description ASPECT Using the ◄/► buttons switches the mode for aspect ratio. See the ASPECT item in IMAGE menu (  30 ). AUTO KEYSTONE EXECUTE Using the ► button executes the auto keystone function. See the AUTO KEYSTONE EXECUTE item in SETUP menu (  36 ). KEYSTONE Using ...

Page 27 - PICTURE Menu; Item; Using the ▲/▼ buttons adjusts the brightness.; CONTRAST; Using the ▲/▼ buttons adjusts the contrast.; GAMMA; Using the ▲/▼ buttons switches the gamma mode.; To adjust CUSTOM; CUSTOM and then pressing the ► button

7 PICTURE Menu PICTURE Menu Item Description BRIGHTNESS Using the ▲/▼ buttons adjusts the brightness. Light ó Dark CONTRAST Using the ▲/▼ buttons adjusts the contrast. Strong ó Weak GAMMA Using the ▲/▼ buttons switches the gamma mode. # DEFAULT ó # CUSTOM ó # DEFAULT ó # CUSTOM ó #3 DEFAULT #5 CUSTO...

Page 29 - Using the ▲/▼ cursor buttons changes the active iris control mode.; MY MEMORY; Selecting a function using the ▲/▼ buttons and pressing the ► or

9 PICTURE Menu Item Description ACTIVE IRIS Using the ▲/▼ cursor buttons changes the active iris control mode. PRESENTATION ó THEATER ó TURN OFF Feature PRESENTATION The active iris displays the best presentation image for both bright and dark scenes. THEATER The active iris displays the best theate...

Page 30 - IMAGE Menu; Using the ▲/▼ buttons switches the mode for aspect ratio.; From the IMAGE menu, items shown in the table below

30 IMAGE Menu IMAGE Menu Item Description ASPECT Using the ▲/▼ buttons switches the mode for aspect ratio. For an RGB or MIU signal NORMAL ó 4:3 ó 6:9 ó SMALL For an M1-D signal NORMAL ó 4:3 ó 6:9 ó 4:9 ó SMALL For a Video signal, S-video signal or Component video signal 4:3 ó 6:9 ó 4:9 ó SMALL For ...

Page 31 - Using the ▲/▼ buttons adjusts the horizontal size.

3 IMAGE Menu Item Description H PHASE Using the ▲/▼ buttons adjusts the horizontal phase to eliminate flicker. Right ó Left • This item can be selected only for an RGB signal, an MIU signal or a component video signal. (except 55i (480i), 65i (576i), SCART RGB) H SIZE Using the ▲/▼ buttons adjusts t...

Page 32 - INPUT Menu; Using the ▲/▼ buttons switches the progress mode.; VIDEO NR; Using the ▲/▼ buttons switches the noise reduction mode.; COLOR SPACE; Using the ▲/▼ buttons switches the mode for color space.; From the INPUT menu, items shown in the table below can

3 INPUT Menu INPUT Menu Item Description PROGRESSIVE Using the ▲/▼ buttons switches the progress mode. TV ó FILM ó TURN OFF • This function is performed only for an interlaced signal of a VIDEO input, an S-VIDEO input or COMPONENT VIDEO input of 55i (480i), 65i (576i) or 5i (080i) signal.• When TV o...

Page 33 - Using the ▲/▼ buttons switches the function of the COMPONENT; VIDEO FORMAT; Feature; finding a more suitable mode.

33 Item Description COMPONENT Using the ▲/▼ buttons switches the function of the COMPONENT (Y, C b /P b , C r /P r ) port. COMPONENT ó SCART RGB When the SCART RGB is selected, the COMPONENT (Y, C b /P b , C r /P r ) and VIDEO ports will function as a SCART RGB port. A SCART adapter or SCART cable i...

Page 34 - e ◄/► buttons to select the RGB

34 Item Description FRAME LOCK Using the ▲/▼ buttons turns the frame lock function on/off. TURN ON ó TURN OFF • This item can be performed only on an RGB signal with a vertical frequency of 50 to 60 Hz. • When the TURN ON is selected, a moving pictures are displayed more smoothly. • This function ma...

Page 35 - The resolution for the RGB and RGB input signals can be set on; (1) In the INPUT menu select the RESOLUTION using the ▲/▼ buttons and

35 INPUT Menu Item Description RESOLUTION The resolution for the RGB and RGB input signals can be set on this projector. (1) In the INPUT menu select the RESOLUTION using the ▲/▼ buttons and press the ► button. The RESOLUTION menu will be displayed. () In the RESOLUTION menu select the resolution yo...

Page 36 - SETUP Menu; Using the ▲/▼ buttons corrects the vertical keystone distortion.; From the SETUP menu, items shown in the table below

36 SETUP Menu SETUP Menu Item Description AUTO KEYSTONE EXECUTE Selecting this item performs the Automatic keystone distortion correction. Projector automatically corrects vertical keystone distortion due to the (forward/backward) setup angle by itself.This function will be executed only once when s...

Page 37 - Using the ▲/▼ buttons corrects the horizontal keystone distortion.; WHISPER; Using the ▲/▼ buttons switches the mode for mirror status.

37 SETUP Menu SETUP Menu (continued) Item Description KEYSTONE Using the ▲/▼ buttons corrects the horizontal keystone distortion. Shrink the right of the image ó Shrink the left of the image • The adjustable range of this function will vary among inputs. For some input, this function may not work we...

Page 38 - AUDIO Menu; From the AUDIO menu, items shown in the table below can

38 AUDIO Menu AUDIO Menu Item Description VOLUME Using the ▲/▼ buttons adjusts the volume. High ó Low TREBLE Using the ▲/▼ buttons adjusts the treble level. High ó Low BASS Using the ▲/▼ buttons adjusts the bass level. High ó Low SRS WOW Using the ▲/▼ buttons switches the mode for SRS WOW mode. HIGH...

Page 39 - SCREEN Menu; 日本語; MENU POSITION; Using the ▲/▼ buttons switches the mode for the blank screen.; From the SCREEN menu, items shown in the table below

39 SCREEN Menu SCREEN Menu Item Description LANGUAGE Using the ▲/▼ buttons switches the OSD (On Screen Display) language. SUOMI ó POLSKI ó TÜRKÇE ENGLISH ó FRANÇAIS ó DEUTSCH ó ESPAÑOL ó ITALIANO NORSK ó NEDERLANDS ó PORTUGUÊS ó 日本語 ó ó ó SVENSKA ó MENU POSITION Using the ◄/►/▲/▼ buttons adjusts the...

Page 40 - Using the ▲/▼ buttons switches the mode for the start-up screen.

40 SCREEN Menu Item Description START UP Using the ▲/▼ buttons switches the mode for the start-up screen. The start-up screen is a screen displayed when no signal or an unsuitable signal is detected. MyScreen ó ORIGINAL ó TURN OFF Feature MyScreen Screen can be registered by the MyScreen item (  41...

Page 41 - below; MyScreen Lock; Using the ▲/▼ buttons turns on/off the MyScreen lock function.

4 SCREEN Menu Item Description MyScreen This item allows you to capture an image for use as a MyScreen image which can be used as the BLANK screen and START UP screen. Display the image you want to capture before executing the following procedure. . Selecting this item displays a dialog titled “MySc...

Page 42 - and press the ► button. Right side of the

4 SCREEN Menu Item Description MESSAGE Using the ▲/▼ buttons turns on/off the message function. TURN ON ó TURN OFF When the TURN ON is selected, the following message function works. “AUTO IN PROGRESS” while automatically adjusting “NO INPUT IS DETECTED” “SYNC IS OUT OF RANGE” “Searching….” while se...

Page 43 - OPTION Menu; Using the ▲/▼ buttons turns on/off the automatic keystone function.

43 OPTION Menu OPTION Menu Item Description AUTO SEARCH Using the ▲/▼ buttons turns on/off the automatic signal search function. TURN ON ó TURN OFF When the TURN ON is selected, detecting no signal automatically cycles through input ports in the following order. The search is started from the curren...

Page 44 - LAMP TIME

44 Item Description AUTO OFF Using the ▲/▼ buttons adjusts the time to count down to automatically turn the projector off. Long (max. 99 minutes) ó Short (min. 0 minute = DISABLE) AUTO OFF ENABLE AUTO OFF DISABLE 0 When the time is set to 0, the projector is not turned off automatically. When the ti...

Page 48 - This projector is equipped with security functions.; Using Security Features; Inputting the PASSWORD; menu to select SECURITY and press the ►; Changing the PASSWORD; and press the ► button to display the ENTER

48 Item Description SECURITY This projector is equipped with security functions. User registration is required before using the security functions. Please contact your local dealer. 1. Using Security Features 1.1 Inputting the PASSWORD 1.1-1 Use the ▲/▼ buttons on the OPTION menu to select SECURITY ...

Page 49 - press and hold the INPUT and ► buttons on; Using the MyScreen PASSWORD Function; press the ► button to display the MyScreen

49 Item Description SECURITY (continued) 1.3 If you have forgotten your PASSWORD .3- Follow the procedure in .- to display the ENTER PASSWORD BOX. .3- While the ENTER PASSWORD BOX is displayed, press and hold the RESET button on the remote control for about 3 seconds or press and hold the INPUT and ...

Page 50 - Using the PIN LOCK Function; to select PIN LOCK and press the ► button

50 Item Description SECURITY (continued) .-4 Move the cursor to the right side of the CHECK PASSWORD BOX and press the ► button to display the PASSWORD for about 0 seconds, please make note of the PASSWORD during this time. Pressing the ENTER button on the remote control or INPUT button on the proje...

Page 51 - Use the ▲/▼ buttons to select TURN OFF and the PIN BOX will be; If you have forgotten your PIN Code; press and hold the INPUT and ► buttons for

5 Item Description SECURITY (continued) 3.1-3 Input a 4 part PIN Code using the ▲/▼/◄/► /RGB and INPUT buttons. A CONFIRMATION BOX will appear. Reenter the same PIN Code. This will complete the PIN Code registration. • If there is no key input for about 55 seconds while the PIN BOX or the CONFIRMATI...

Page 52 - Using the Transition Detector Function; Function; Use the ▲/▼ buttons on the SECURITY menu to; Transition Detector; PASSWORD; -1 Use the ▲/▼ buttons on the SECURITY menu to select Transition

5 Item Description SECURITY (continued) 4. Using the Transition Detector Function While the Transition Detector function is ON, when power switch is started to supply to the projector, it might react as below. • Transition Detector alarm shown below might appear on screen, if the projector has been ...

Page 53 - Enter the registered PASSWORD and the screen will return to the; If you have forgotten your PASSWORD; - Select TURN OFF to display the ENTER

53 Item Description SECURITY (continued) 4.3 Setting the Transition Detector off 4.3- Follow the procedure in 4.- to display the Transition Detector on/off menu. 4.3- Select TURN OFF to display the ENTER PASSWORD BOX (large). Enter the registered PASSWORD and the screen will return to the Transition...

Page 54 - MIU Menu; Select an item using the ▲/▼ cursor buttons on the; Network Settings of the User’s Manual - Network Functions)

54 (continued on next page) Item Description LIVE MODE Selecting this item sets the projector onto the “Live Mode”. On the “Live Mode”, the projector displays the images from the PC via Network, supported by “MIU Live Viewer”. (  1.1 Live Mode of the User’s Manual - Network Functions) PC-LESS PRESE...

Page 55 - To erase the image displayed and its source file in the SD card; To stop erasing, press the ◄ button and INPUT button on the; DHCP (Dynamic Host Configuration Protocol)

55 (continued on next page) Item Operation e-SHOT Selecting this item displays the e-SHOT menu. Use the ▲/▼ buttons to select an item which is a still image by the e-SHOT (  4.7 e-SHOT (Still Image Transfer) Display of the User’s Manual - Network Functions) and the ► or ENTER button to display the ...

Page 58 - Use the ▲/▼ buttons to select an item, and the ► or; MIU RESTART; Use the ▲ button to restart the network communication.

58 MIU Menu Item Description INFORMATION Selecting this item displays the MIU-INFORMATION dialog for confirming the network setting. • Only the first 6 characters of the projector name are displayed. • Only the first 3 characters of the SSID are displayed. • When the voltage level of the battery for...

Page 59 - Replacing the lamp; In case of replacement by yourself,; Loosen the 3 screws (marked by arrow) of the; Insert the new lamp, and retighten firmly the; Maintenance; The lamp cover

59 Maintenance Lamp A lamp has finite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and early replac...

Page 60 - Lamp warning; HIGH VOLTAGE; About disposal of a lamp:; This product contains a mercury lamp do not put; Use only the lamp of the specified type.

60 Maintenance Lamp (continued) Lamp warning HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE WARNING ►The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different...

Page 61 - Cleaning the air filter; The front side of the projector

6 Please check and clean the air filter periodically. If the air filter becomes clogged by dust or the like, internal temperatures rise, which could cause a fire, a burn or malfunction to the projector. When the indicators or a message prompts you to clean the air filter, comply with it as soon as p...

Page 62 - the EASY MENU

6 WARNING ►Before taking care of the air filter, make sure the power switch is off and the power cable is not plugged in, then allow the projector to cool sufficiently. Taking care of the air filter in a high temperature state of the projector could cause an electric shock, a burn or malfunction to ...

Page 63 - projector to cool sufficiently.; Replace battery with HITACHI MAXELL, Part No.CR2032; facing. And push the battery into the battery holder fully to fix.; Battery Cover; Knob; Internal clock battery

63 Maintenance . Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently. . After making sure that the projector has cooled adequately, slowly turn over the projector, so that the bottom is facing. 3. Remove the battery cover. Turn the battery cover in the directi...

Page 64 - Inside of the projector; inspected by your dealer about once every year.; Caring for the lens; quality. Please take care of the lens, being cautious of handling.; Caring for the cabinet and remote control; Other care

64 Maintenance Inside of the projector In order to ensure the safe use of your projector, please have it cleaned and inspected by your dealer about once every year. Caring for the lens If the lens is flawed, soiled or fogged, it could cause deterioration of display quality. Please take care of the l...

Page 65 - When the unit's power is on, messages such as those shown below may be; There is no input signal.; The horizontal or vertical frequency of the input signal; CHECK THE AIR FLOW; The internal temperature is rising.; REMINDER; A note of precaution when cleaning the air filter.; Troubleshooting

65 Troubleshooting Related messages When the unit's power is on, messages such as those shown below may be displayed. When any such message is displayed on the screen, please follow the instructions described below. If the same message is displayed after the remedy, or if a message other than the fo...

Page 66 - Regarding the indicator lamps; Green; Orange; Red; sufficiently cooled down, please make confirmation of; Red; The lamp cover has not been properly fixed.; sufficiently cooled down, please make confirmation

66 Troubleshooting Regarding the indicator lamps Lighting and flashing of the POWER indicator, the LAMP indicator, and the TEMP indicator have the meanings as described in the table below. Please follow the instructions within the table. If the same indication is displayed after the remedy, or if an...

Page 67 - Regarding the indicator lamps (continued); The cooling fan is not operating.; It is time to clean the air filter.; There is a possibility that the interior portion; At least 1 “Power ON” schedule is saved to the

67 Troubleshooting Regarding the indicator lamps (continued) POWER indicator LAMP indicator TEMP indicator Description Blinking In Red or Lighting In Red Turned off Blinking In Red The cooling fan is not operating. Please turn the power off, and allow the projector to cool down at least 0 minutes. A...

Page 68 - Phenomena that may be easy to be mistaken for machine defects; Phenomenon; of these has not been properly fixed.; at least 45 minutes. After the projector has sufficiently cooled

68 Troubleshooting Phenomena that may be easy to be mistaken for machine defects WARNING ► Never use the projector if abnormal operations such as smoke, strange odor, excessive sound, damaged casing or elements or cables, penetration of liquids or foreign matter, etc. should occur. In such cases, im...

Page 71 - Warranty And After-Service / Specification; Warranty and after-service; Specification

7 Warranty And After-Service / Specification Warranty and after-service If a problem occurs with the equipment, first refer to the “Troubleshooting” and run through the suggested checks. If this does not resolve the problem, please contact your dealer or service company. They will tell you what warr...

Page 72 - Specifications

7 Specifications Specifications (continued) 48 3 9 54 39 [unit: mm]