Page 2 - Contents; Connecting with your devices; Replacing the internal clock battery
2 Contents Introduction . . . . . . . . . . . . . . . 3 Features . . . . . . . . . . . . . . . . . . . . . . 3Checking the contents of package . . . 3Part names . . . . . . . . . . . . . . . . . . . . 4 Setting up . . . . . . . . . . . . . . . . . 7 Arrangement . . . . . . . . . . . . . . . . . . . ...
Page 3 - NOTE; Introduction; HDMI; Contents of package; Features
3 Introduction • Keep the original packing materials, for future reshipment. Be sure to use the original packing materials when moving the projector. Use special caution for the lens. NOTE Introduction The projector provides you with the broad use by the following features. Checking the contents of ...
Page 4 - Projector; The lamp unit is inside.; AC IN; : Do not touch around the lamp cover and the exhaust; Par t names
4 Introduction Projector (1) Lamp cover ( 85 ) The lamp unit is inside. (2) Focus ring ( 21 ) (3) Zoom ring ( 21 ) (4) Control panel ( 5 ) (5) Elevator buttons (x 2) ( 21 ) (6) Elevator feet (x 2) ( 21 ) (7) Remote sensor ( 15 ) (8) Lens ( 90 ) (9) Intake vents(10) Filter cover ( 87 ) The air filter ...
Page 5 - Control panel; It consists of four cursor buttons.; Rear panel
5 Introduction Control panel (1) STANDBY/ON button ( 17 ) (2) INPUT button ( 18 ) (3) MENU button ( 26 ) It consists of four cursor buttons. (4) POWER indicator ( 17, 93, 94 ) (5) TEMP indicator ( 93, 94 ) (6) LAMP indicator ( 93, 94 ) Rear panel ( 9 ~ 13 ) (1) USB TYPE A port (2) LAN port (3) HDMI ...
Page 6 - Remote control; Back of
6 Introduction Remote control (1) VIDEO button ( 19 ) (2) COMPUTER button ( 19 ) (3) SEARCH button ( 20 ) (4) STANDBY/ON button ( 17 ) (5) ASPECT button ( 20 ) (6) AUTO button ( 22 ) (7) BLANK button ( 25 ) (8) MAGNIFY - ON button ( 24 ) (9) MAGNIFY - OFF button ( 24 ) (10) MY SOURCE/DOC.CAMERA butt...
Page 7 - Arrangement; On a horizontal surface; Setting up
7 Setting up Install the projector according to the environment and manner the projector will be used in. Arrangement Refer to the illustrations and tables below to determine screen size and projection distance.The values shown in the table are calculated for a full size screen: 1024 x 768 a Screen ...
Page 8 - ►Place the projector in a stable horizontal position. If the
8 Setting up ►Place the projector in a stable horizontal position. If the projector falls or is knocked over, it could cause injury and/or damage to the projector. Using a damaged projector could then result in fire and/or electric shock.• Do not place the projector on an unstable, slanted or vibrati...
Page 9 - WARNING; COMPUTER IN1
9 Setting up Before connecting the projector to a device, consult the manual of the device to confirm that the device is suitable for connecting with this projector and prepare the required accessories, such as a cable in accord with the signal of the device. Consult your dealer when the required acc...
Page 10 - player
10 R L COMPONENT Cb/Pb Y Cr/Pr AUDIO OUT MIC HDMI USBTYPE B USBTYPE ADC5V 0.5A LAN COMPUTER IN1 COMPUTER IN2 VIDEO S-VIDEO CONTROL MONITOR OUT AUDIO OUT IN3 IN1 IN2 L R L R Y Cb/Pb Cr/Pr HDMI R L R L VIDEO S-VIDEO AUDIO OUT AUDIO OUT AUDIO OUT USB (A) DISPLA Y RS-232C Connecting with your devices (c...
Page 12 - • If you insert a USB storage device, such as a USB memory, into the; USB TYPE; • You can connect a dynamic microphone to the; MIC; • If a loud feedback noise is produced from the speaker, move the; USB storage; ►Before removing the USB storage device from the port of the; Microphone system
12 Connecting with your devices (continued) Setting up • If you insert a USB storage device, such as a USB memory, into the USB TYPE A port and select the port as the input source, you can view images stored in the device ( 73 ) . • You can connect a dynamic microphone to the MIC port with a 3.5 mm ...
Page 13 - CAUTION; Access point
13 Connecting with your devices (continued) To use network functions of the projector, connect the LAN port with the computer's LAN port, or with an access point that is connected to the computer with wireless LAN, using a LAN cable. To use NETWORK BRIDGE function, also connect the CONTROL port and ...
Page 14 - Connecting to a power supply; Using the security bar and slot; Power cord; Security bar
14 Setting up Connecting to a power supply 1. Put the connector of the power cord into the AC IN (AC inlet) of the projector. 2. Firmly plug the power cord’s plug into the outlet. In a couple of seconds after the power supply connection, the POWER indicator will light up in steady orange. ►Please us...
Page 15 - Align and insert the two AA batteries
15 30º 30º Approx. 3 m Remote control Remote control About the remote control signal The remote control works with the projector’s remote sensor. This projector has a remote sensor on the front.The sensor senses the signal within the following range when the sensor is active: 60 degrees (30 degrees ...
Page 16 - Changing the frequency of remote control signal; ►Improper use of the simple mouse &; POWER
16 Remote control Changing the frequency of remote control signal The accessory remote control has the two choices on signal frequency Mode 1:NORMAL and Mode 2:HIGH. If the remote control does not function properly, attempt to change the signal frequency.In order to set the Mode, please keep pressin...
Page 17 - Tur ning on the power; Tur ning off the power; button; indicator
17 Power on/off 1. Make sure that the power cord is firmly and correctly connected to the projector and the outlet. Tur ning on the power 2. Make sure that the POWER indicator is steady orange ( 93 ). Then remove the lens cover. 3. Press STANDBY/ON button on the projector or the remote control.The pr...
Page 18 - Operating; INPUT; MUTE
18 Operating Operating 1. Adjusting the volume Use the VOLUME + / VOLUME - buttons to adjust the volume. A dialog will appear on the screen to aid you in adjusting the volume. If you do not do anything, the dialog will automatically disappear after a few seconds. ● When is selected for current pictu...
Page 19 - VIDEO; COMPUTER
19 VIDEO DOC.CAMERA KEYSTONE ASPECT SEARCH BLANK MUTE MY BUTTON POSITION 1 2 MENU COMPUTER MY SOURCE/ AUTO MAGNIFY PAGE UP VOLUME DOWN ON OFF 㧗 FREEZE Operating 1. Press VIDEO button on the remote control. Each time you press the button, the projector switches its input port from the current port ...
Page 20 - SEARCH; ASPECT
20 VIDEO DOC.CAMERA KEYSTONE ASPECT SEARCH BLANK MUTE MY BUTTON POSITION 1 2 MENU COMPUTER MY SOURCE/ AUTO MAGNIFY PAGE UP VOLUME DOWN ON OFF 㧗 FREEZE 1. Press ASPECT button on the remote control. Each time you press the button, the projector switches the mode for aspect ratio in turn. Selecting a...
Page 21 - Adjusting the projector's elevator; Position the front side of the projector to the desired height.; Focus ring; ►Do not handle the elevator buttons without holding the; Adjusting the zoom and focus
21 Operating Adjusting the projector's elevator When the place to put the projector is slightly uneven to the left or right, use the elevator feet to place the projector horizontally. Using the feet can also tilt the projector in order to project at a suitable angle to the screen, elevating the fron...
Page 22 - Adjusting the position; POSITION; AUTO
22 Operating 1. Press POSITION button on the remote control when no menu is indicated. The “POSITION” indication will appear on the screen. Adjusting the position 2. Use the ▲/▼/◄/► cursor buttons to adjust the picture position.When you want to reset the operation, press RESET button on the remote c...
Page 23 - Correcting the keystone distor tions; KEYSTONE; KEYSTONE
23 Operating 1. Press KEYSTONE button on the remote control. A dialog will appear on the screen to aid you in correcting the distortion. Correcting the keystone distor tions 2. Use the ▲/▼ cursor buttons to select AUTO or MANUAL operation, and press the ► button to perform the following.(1) AUTO exe...
Page 24 - Using the magnify feature; Press the; MAGNIFY OFF; button on the remote control to exit magnification.
24 Operating 1. Using the magnify feature 2. MAGNIFYON/OFF button VIDEO DOC.CAMERA KEYSTONE ASPECT SEARCH BLANK MUTE MY BUTTON 1 2 COMPUTER MY SOURCE/ AUTO MAGNIFY PAGE UP VOLUME DOWN ON OFF 㧗 FREEZE 3. 4. 5. Press the MAGNIFY ON button on the remote control. The picture will be magnified, and the ...
Page 25 - Temporarily blanking the screen; FREEZE; FREEZE; BLANK
25 Operating 1. Press BLANK button on the remote control. The BLANK screen will be displayed instead of the screen of input signal. Please refer to BLANK item in SCREEN menu ( 44 ). To exit from the BLANK screen and return to the input signal screen, press BLANK button again. Temporarily blanking th...
Page 26 - Using the menu function; MENU; ESC
26 Operating 1. To start the MENU, press the MENU button. The MENU you last used (EASY or ADVANCED) will appear. EASY MENU has priority to appear just after powered on. Using the menu function 2. (1) Use the ▲/▼ cursor buttons to select an item to operate. If you want to change it to the ADVANCED ME...
Page 27 - Indication
27 Operating Using the menu function (continued) 3. To close the MENU, press the MENU button again or select EXIT and press the ◄ cursor button or ENTER button. Even if you do not do anything, the dialog will automatically disappear after about 30 seconds. ● If you want to move the menu position, us...
Page 28 - EASY MENU; NORMAL
28 EASY MENU EASY MENU From the EASY MENU, items shown in the table below can be performed.Select an item using the ▲/▼ cursor buttons. Then perform it according to the following table. Item Description ASPECT Using the ◄/► buttons switches the mode for aspect ratio.See the ASPECT item in IMAGE menu...
Page 29 - Press the ► or
29 EASY MENU Item Description ECO MODE Using the ◄/► buttons turns off/on the Eco mode.See the ECO MODE item in SETUP menu ( 41 ). MIRROR Using the ◄/► buttons switches the mode for mirror status.See the MIRROR item in SETUP menu ( 41 ). RESET Performing this item resets all of the EASY MENU items e...
Page 30 - PICTURE menu; ENTER; button to execute the; To adjust CUSTOM
30 PICTURE menu PICTURE menu From the PICTURE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. Item Description BRIGHTNESS Using the...
Page 33 - IMAGE menu; button to; Using the ▲/▼ buttons switches the mode for aspect ratio.
33 IMAGE menu IMAGE menu From the IMAGE menu, items shown in the table below can be performed.Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. Item Description ASPECT Using the ▲/▼ button...
Page 35 - The vertical position and horizontal position will be
35 IMAGE menu Item Description H PHASE Using the ◄/► buttons adjusts the horizontal phase to eliminate flicker. Right Left • This item can be selected only for a computer signal or a component video signal. This function is unavailable for a signal from the LAN , USB TYPE A , USB TYPE B or HDMI port....
Page 36 - INPUT menu
36 INPUT menu INPUT menu From the INPUT menu, items shown in the table below can be performed.Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. Item Description PROGRESSIVE Using the ▲/▼ b...
Page 40 - SETUP menu; Item
40 SETUP menu SETUP menu From the SETUP menu, items shown in the table below can be performed.Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. Item Description AUTO KEYSTONE Selecting thi...
Page 42 - AUDIO menu
42 AUDIO menu AUDIO menu From the AUDIO menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or the ENTER button to execute the item. Then perform it according to the following table. Item Description VOLUME Using the ◄/► b...
Page 43 - MIC LEVEL; HIGH; MIC VOLUME; Low
43 AUDIO menu Item Description HDMI AUDIO Using the ▲/▼ buttons switches the mode for the HDMI audio.Check each of the two modes provided and select the suitable one for your HDMI audio device. 1 2 MIC LEVEL Using the ▲/▼ buttons switches the input level to match that of the microphone connected to ...
Page 44 - SCREEN menu; above
44 SCREEN menu SCREEN menu From the SCREEN menu, items shown in the table below can be performed.Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. Item Description LANGUAGE Using the ▲/▼/◄...
Page 47 - NAME and press the ► or; The SOURCE NAME menu will be displayed.; button to determine your icon selection.
47 SCREEN menu Item Description SOURCE NAME Each input port for this projector can have a name applied to it.(1) Use the ▲/▼ buttons on the SCREEN menu to select SOURCE NAME and press the ► or ENTER button. The SOURCE NAME menu will be displayed. (2) Use the ▲/▼ buttons on the SOURCE NAME menu to se...
Page 49 - MODE; CAPTIONS; CHANNEL
49 SCREEN menu Item Description C.C. (Closed Caption) The C.C. is the function that displays a transcript or dialog of the audio portion of a video, files or other presentation or other relevant sounds. It is required to have NTSC format video or 480i@60 format component video source supporting C.C. ...
Page 50 - OPTION menu; button to execute
50 OPTION menu OPTION menu From the OPTION menu, items shown in the table below can be performed.Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item, except for the items LAMP TIME and FILTER TIME. Then perform it according to the following ...
Page 56 - ON
56 OPTION menu Item Description SERVICE (continued) KEY LOCK Using the ▲/▼ buttons turns on/off the key lock feature. When ON is selected, the buttons on the projector except the STANDBY/ON button are locked. ON OFF • Please use this function to prevent tampering or accidental operation. This functi...
Page 57 - below
57 OPTION menu Item Description SERVICE (continued) COMMUNICATION (continued) COMMUNICATION TYPE Select the communication type for transmission via the CONTROL port. NETWORK BRIDGE OFF NETWORK BRIDGE: Select this type, if it is required to control an external device as a network terminal, via this p...
Page 58 - OFF
58 OPTION menu Item Description SERVICE (continued) COMMUNICATION (continued) RESPONSE LIMIT TIME Select the time period to wait for receiving response data from other device communicating by the NETWORK BRIDGE and the HALF-DUPLEX through the CONTROL port. OFF 1s 2s 3s OFF: Select this mode if it is...
Page 59 - port
59 OPTION menu Item Description SERVICE (continued) INFORMATION Selecting this item displays a dialog titled “INPUT_INFORMATION”. It shows the information about the current input. • The “FRAME LOCK” message on the dialog means the frame lock function is working. • The “SCART RGB” message means the C...
Page 60 - button on the remote control to execute the item. Then; User’s Manual - Network Guide; for details of NETWORK operation.; NETWORK menu; • If you are not utilizing SNTP; User’s; , then you must set the DATE AND TIME during the; button on the remote
60 NETWORK menu Remember that incorrect network settings on this projector may cause trouble on the network. Be sure to consult with your network administrator before connecting to an existing access point on your network.Select “NETWORK” from the main menu to access the following functions. Select ...
Page 61 - in the
61 NETWORK menu Item Description SETUP (continued) IP ADDRESS Use the ▲/▼/◄/► buttons to enter the IP ADDRESS. This function can only be used when DHCP is set to OFF. • The IP ADDRESS is the number that identifies this projector on the network. You cannot have two devices with the same IP ADDRESS on ...
Page 64 - button to use the function.
64 NETWORK menu Item Description PRESENTATION Selecting this item displays the PRESENTATION menu.Use ▲/▼ buttons to select one of the following items, then press ► or ENTER button to use the function. QUIT PRESENTER MODE If you set a computer to the Presenter mode while its image is projected, the p...
Page 66 - • For the details of PASSCODE, see the section
66 NETWORK menu Item Description INFORMATION Selecting this item displays the NETWORK_INFORMATION dialog for confirming the network settings. • For the details of PASSCODE, see the section Selecting the network connection method in the User’s manual – Network Guide. • Only the first 16 characters of ...
Page 67 - Enter the SECURITY menu; RESET; SECURITY menu
67 SECURITY menu This projector is equipped with security functions.From the SECURITY menu, items shown in the table below can be performed.To use SECURITY menu: User registration is required before using the security functions. Enter the SECURITY menu 1. Use the ▲/▼ buttons on the SECURITY menu to ...
Page 68 - MyScreen; Turning on the MyScreen PASSWORD; Turning off the MyScreen PASSWORD
68 SECURITY menu Item Description MyScreen PASSWORD The MyScreen PASSWORD function can be used to prohibit access to the MyScreen function and prevent the currently registered MyScreen image from being overwritten. 1 Turning on the MyScreen PASSWORD 1-1 Use the ▲/▼ buttons on the SECURITY menu to se...
Page 73 - Presentation tools; USB TYPE A
73 Presentation tools Presentation tools The PC-LESS Presentation reads image data from storage media inserted into the USB TYPE A port and displays the image on the following modes. The PC-LESS Presentation can be started by selecting the USB TYPE A port as the input source. This feature allows you...
Page 74 - Thumbnail mode; port as the input source.; Thumbnail menu
74 Presentation tools Thumbnail mode PC-LESS Presentation (continued) The Thumbnail mode displays the images stored in a USB storage device on the Thumbnail screen. Maximum 20 images are displayed in a screen.If you wish, you can jump into the Full Screen mode or Slideshow mode, after you select som...
Page 75 - The SETUP menu for the selected image; next
75 Presentation tools PC-LESS Presentation (continued) The SETUP menu for the selected image Item Functions SETUP Use the ◄/► cursor buttons to switch each setting or use the ► cursor button to execute the functions as follows. RETURN Press the ► cursor button or ENTER to return to the Thumbnail scr...
Page 76 - Operating by the menu on the Thumbnail screen
76 Presentation tools You can also control the images by using the menu on the Thumbnail screen. PC-LESS Presentation (continued) Operating by the menu on the Thumbnail screen Item Functions Moves to an upper folder. SORT Allows you to sort files and folders as following. RETURN Press the ► cursor bu...
Page 77 - button when the
77 Presentation tools PC-LESS Presentation (continued) • These operations are not accessible while the projector OSD is displayed. • The Thumbnail mode shows 20 pictures in 1 page as maximum.• It is not possible to change the input port by using the INPUT button when the Thumbnail screen, Slideshow,...
Page 78 - Full Screen Mode; Button operation; Shows the next picture.; Full screen display
78 Presentation tools PC-LESS Presentation (continued) The Full Screen mode shows a full display image. To display in Full Screen mode, select an image in the Thumbnail screen. Then press the ENTER button on the remote control or the INPUT button on the keypad, or click [ENTER] on the Web Remote Con...
Page 79 - Slideshow mode; Displays thumbnail
79 Presentation tools PC-LESS Presentation (continued) Slideshow mode The following operations can be accessible while the Slideshow is displayed. * These operations are not accessible while the projector OSD is displayed. • It is not possible to change the input port by using the INPUT button when ...
Page 81 - Playlist; “rot3” increase another 90 degrees in order.; “Slideshow mode”
81 Presentation tools PC-LESS Presentation (continued) Playlist The Playlist is a DOS format text file, which decides the order of displayed still image files in the Thumbnail or Slideshow.The playlist file name is “playlist.txt” and it can be edited on a computer. It is created in the folder that cont...
Page 82 - USB Display; USB TYPE B; port on the projector using a USB cable,; Hardware and software requirement for computer; Windows; • The “LiveViewer” (refer to the
82 Presentation tools USB Display The projector can display images transferred from a computer via an USB cable ( 10 ). Select the USB DISPLAY for the USB TYPE B item in the OPTION menu. When you connect your computer to the USB TYPE B port on the projector using a USB cable, the projector will be r...
Page 83 - Floating menu
83 Presentation tools Display : The Floating menu is displayed, and the icon disappears from the Windows notification area. Quit : The application is closed, and the icon disappears from the Windows notification area. The menu shown in the right will be displayed when you right-click the application i...
Page 84 - Optimize Perfor mance; Transmission speed; Keep PC resolution; Options window; About
84 Presentation tools If you select the Option button on the Floating menu, the Options window is displayed. Optimize Perfor mance The “LiveViewer Lite for USB” captures screenshots in JPEG data and sends them to the projector. The “LiveViewer Lite for USB” has two options that have different compre...
Page 85 - Replacing the lamp; Replacing the lamp; Handles; lamp cover
85 Maintenance Maintenance A lamp has finite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and early ...
Page 86 - Lamp war ning; HIGH VOLTAGE; ►The projector uses a high-pressure mercury glass lamp. The lamp; About disposal of a lamp:; This product contains a mercury lamp do not put
86 Maintenance Lamp war ning Replacing the lamp (continued) HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE ►The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a di...
Page 87 - Cleaning and replacing the air filter; Use a vacuum cleaner on and around the filter cover.; Filter cover
87 Maintenance The air filter unit of this projector consists of a filter cover, two kinds of filters, and a filter frame. The new double large filters system is expected to function longer. However, please check and clean it periodically to keep ventilation needed for normal operation of the projector.W...
Page 88 - Cleaning and replacing the air filter (continued); button to display a menu.
88 Maintenance Cleaning and replacing the air filter (continued) 9. Turn the projector on and reset the filter time using the FILTER TIME item in the EASY MENU. ►Before taking care of the air filter, make sure the power cable is not plugged in, then allow the projector to cool sufficiently. Taking care ...
Page 89 - Replacing the inter nal clock batter y; HITACHI MAXELL; HITACHI; or
89 Maintenance WARNING ►Be careful of handling a battery, as a battery can cause explosion, cracking or leakage, which could result in a fire, an injury, and environment pollution.• Use only the specified and perfect battery. Do not use a battery with damage, such as a scratch, a dent, rust or leakage...
Page 90 - Other care; ►Before caring, make sure the power cord is not plugged in,; Inside of the projector
90 Maintenance Other care In order to ensure the safe use of your projector, please have it cleaned and inspected by your dealer about once every year. 1. Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently. 2. After making sure that the projector is cool adequ...
Page 91 - Troubleshooting; ►Never use the projector if abnormal operations such as smoke,; Related messages; Message; There is no input signal.; Manual - Network Guide
91 Troubleshooting Troubleshooting If an abnormal operation should occur, stop using the projector immediately. Otherwise if a problem occurs with the projector, the following checks and measures are recommended before requesting repair. If this does not resolve the problem, please contact your deal...
Page 92 - The internal temperature is rising.
92 Message Description The internal temperature is rising. Please turn the power off, and allow the projector to cool down at least 20 minutes. After having confirmed the following items, please turn the power ON again. • Is there blockage of the air passage aperture? • Is the air filter dirty? • Does...
Page 93 - Regarding the indicator lamps; When operation of the; LAMP; and; indicators differs from usual,; Green; Orange; Red; Red; Red; Red; Red
93 Troubleshooting Regarding the indicator lamps When operation of the LAMP , TEMP and POWER indicators differs from usual, check and cope with it according to the following table. POWER indicator LAMP indicator TEMP indicator Description Lighting In Orange Turned off Turned off The projector is in ...
Page 94 - Regarding the indicator lamps (continued); Blinking; It is time to clean the air filter.; blinking in; Shutting the projector down; ), please push the shutdown switch using; Resetting all settings; ) can reset all settings (except settings such
94 HDMI USBTYPE B Troubleshooting Regarding the indicator lamps (continued) • When the interior portion has become overheated, for safety purposes, the projector is automatically shut down, and the indicator lamps may also be turned off. In such a case, disconnect the power cord, and wait at least 4...
Page 95 - Phenomena that may be easy to be mistaken for machine defects; Phenomenon; Power does not; The electrical power cord is not plugged in.; Correctly connect the power cord.; Neither sounds; The signal cables are not correctly connected.; Correctly connect the connection cables.; Signal source does not correctly work.; Select the input signal, and correct the settings.
95 Troubleshooting Phenomena that may be easy to be mistaken for machine defects About the phenomenon confused with a machine defect, check and cope with it according to the following table. Phenomenon Cases not involving a machine defect Reference page Power does not come on. The electrical power c...
Page 98 - The SAVING function is working.; • Although bright spots or dark spots may appear on the screen, this
98 Phenomenon Cases not involving a machine defect Reference page Network does not work The SAVING function is working. Select NORMAL for STANDBY MODE item in the SETUP menu. 41 NETWORK BRIDGE function does not work The NETWORK BRIDGE function is turned off. Select NETWORK BRIDGE for COMMUNICATION T...
Page 99 - Specifications
99 Specifications Specifications Item Specification Product name Liquid crystal projector Liquid Crystal Panel 786,432 pixels (1024 horizontal x 768 vertical) Lamp <CP-X2011N> 190 W UHP <CP-X2511N, CP-X3011N, CP-X4011N> 210 W UHP Speaker 16 W mono ( 8 W x 2 ) Power supply/Rated current <...
Page 100 - End User License Agreement for the Projector Software
100 317mm 1 13mm 98mm 288mm LAN MIC HDMI USB IN1 IN2 Specifications Specifications (continued) [unit: mm] End User License Agreement for the Projector Software • Software in the projector consists of the plural number of independent software modules and there exist our copyright or/and third party cop...
Hitachi WH14DBL
User Manual
Hitachi DS14DSFL
User Manual
Hitachi L32A104
User Manual
Hitachi CG22EADSL
User Manual
Hitachi CS33EB
User Manual
Hitachi C10FCH2
User Manual
Hitachi WH18DSDL
User Manual
Hitachi LE49S508
User Manual
Hitachi L46S604
User Manual
Hitachi CG23ECPSL
User Manual
Hitachi DB3DL2
User Manual