Hitachi CP-WX4021N - Manuals

Page 2 - Contents; Connecting with your devices; USB Display; Replacing the internal clock battery

2 Contents Introduction . . . . . . . . . . . . . . . 3 Features . . . . . . . . . . . . . . . . . . . . . . 3Checking the contents of package . . . 3Part names . . . . . . . . . . . . . . . . . . . . 4 Setting up . . . . . . . . . . . . . . . . . 7 Arrangement . . . . . . . . . . . . . . . . . . . ...

Page 3 - NOTE; Introduction; HDMI; Features

3 Introduction • Keep the original packing materials, for future reshipment. Be sure to use the original packing materials when moving the projector. Use special caution for the lens.• The projector may make a rattling sound when tilted, moved or shaken, since a ﬂap to control the air ﬂow inside of ...

Page 4 - Par t names; Projector; AC; The internal clock battery is inside.

4 Introduction Par t names Projector (1) Lamp cover ( 89 ) The lamp unit is inside. (2) Speakers (x2) ( 19 , 46 ) (3) Filter cover ( 91 ) The air ﬁlter and intake vent are inside. (4) Elevator feet (x2) ( 22 ) (5) Elevator buttons (x2) ( 22 ) (6) Remote sensor ( 16 ) (7) Lens ( 94 ) (8) Lens cover(9...

Page 5 - Control panel and Lens adjusters

5 Introduction Part names (continued) Control panel and Lens adjusters .1%- (1) Lens adjuster door(2) FOCUS ring ( 23 ) (3) ZOOM ring ( 23 ) (4) HORIZONTAL (horizontal) adjuster ( 23 ) (5) VERTICAL (vertical) adjuster ( 23 ) (6) LOCK (horizontal lens position lock) ( 23 ) (7) STANDBY/ON button ( 18 ...

Page 6 - Remote control; Back of; button

6 Introduction Part names (continued) Remote control Back of the remote control (2)(1)(6)(5)(16)(8)(9)(19)(17)(20)(22) (24) (10)(4)(3)(7)(12)(14)(11)(13)(15)(18)(21)(23)(25) (26) VIDEO DOC.CAMERA KEYSTONE ASPECT SEARCH BLANK MUTE MY BUTTON POSITION 1 2 ESC ENTER MENU RESET COMPUTER MY SOURCE/ AUTO M...

Page 7 - Setting up; Specifications; in the; User’s manual; Arrangement; Refer to the following tables; Screen size

7 Setting up Setting up Install the projector according to the environment and manner the projector will be used in. For the case of installation in a special state such as ceiling mount, the speciﬁed mounting accessories ( Speciﬁcations in the User’s manual (concise) ) and service may be required. ...

Page 8 - Install the projector where you can access the power; If an abnormality should occur, unplug the projector urgently.; Do not subject the projector to unstable conditions.; If the projector falls

8 Setting up Arrangement (continued) T-2: CP-WX4021N (1280X800) (±10%) Screen type 16:10 4:3 Screen size Projection distance Screen height Screen size Projection distance Screen height Ⓗ Ⓥ ⓐ min. ⓐ max. ⓑ ⓒ Ⓗ Ⓥ ⓐ min. ⓐ max . ⓑ ⓒ (inch) m m m inch m inch cm inch cm inch m m m inch m inch cm inch cm ...

Page 9 - Do not install the projector near thermally conductive or; WARNING; Place the projector in a cool place with sufficient; CAUTION

9 Setting up Arrangement (continued) • Position the projector to prevent light from directly hitting the projector's remote sensor.• Do not place the product in a place where radio interference may be caused.• Keep heat-sensitive things away from the projector. Otherwise, they may be damaged by the ...

Page 11 - Computer; Some signal may need an adapter to input this projector.

11 Setting up Connecting with your devices (continued) Computer ( 40 ) ( 41 ) ( 61 ) ( 41 ) ( 46 ) ( 55 ) • Before connecting the projector to a computer, consult the computer’s manual and check the compatibility of the signal level, the synchronization methods and the display resolution output to t...

Page 12 - • If an oversized USB storage device blocks the; extension cable to connect the USB storage device.; LAN; port to any network that might have the excessive

12 Setting up Connecting with your devices (continued) Computer Access point USB storage device ( 64 ) ( 78 ) ( 64 ) ( 55 ) ( 61 ) (continued on next page) • If an oversized USB storage device blocks the LAN port, use a USB extension cable to connect the USB storage device. NOTE ► Before connecting ...

Page 13 - • The; Be sure to use an HDMI cable that has the HDMI logo.

13 Setting up ( 41 ) ( 41 ) ( 41 ) ( 46 ) VCR/DVD/Blu-ray Disc player Digital video device • The HDMI port of this model is compatible with HDCP (High-band- width Digital Content Protection) and therefore capable of displaying a video signal from HDCP compatible DVD players or the like.- The HDMI su...

Page 14 - Speakers; MIC; Microphone function

14 Setting up Speakers (with an ampliﬁer) Wired remote control (optional) Monitor Microphone system Connecting with your devices (continued) • If a loud feedback noise is produced from the speaker, move the microphone away from the speaker. • This projector doesn't support plug-in power for the micr...

Page 15 - Connecting to a power supply; Using the security bar and slot; AC IN; Security slot; security bar

15 Connecting to a power supply 1. Put the connector of the power cord into the AC IN (AC inlet) of the projector. 2. Firmly plug the power cord’s plug into the outlet. In a couple of seconds after the power supply connection, the POWER indicator will light up in steady orange. ►Please use extra cau...

Page 16 - Align and insert the two AA batteries

16 30° 3m 30° (approx.) Remote control About the remote control signal The remote control works with the projector’s remote sensor. This projector has a remote sensor on the front.The sensor senses the signal within the following range when the sensor is active: 60 degrees (30 degrees to the left an...

Page 17 - USB; port and the computer’s type A USB port are; NOTICE

17 Changing the frequency of remote control signal The accessory remote control has the two choices on signal frequency Mode 1:NORMAL and Mode 2:HIGH. If the remote control does not function properly, attempt to change the signal frequency.In order to set the Mode, please keep pressing the combinati...

Page 18 - Tur ning on the power; Tur ning off the power; POWER; indicator

18 VIDEO DOC .CAME RA KEYST ONE ASPE CT SEA RCH BLA NK MUTE MY BU TTO N POSI TIO N 1 2 ESC ENTER MENU RESET COMPUT ER MY SOURC E/ AUTO MAGNIFY PAG E UP VOLUM E DOWN ࡯ ON OFF 㧗 FRE EZE 1. Make sure that the power cord is ﬁrmly and correctly connected to the projector and the outlet. Tur ning on the p...

Page 19 - INPUT; MUTE

19 Operating 1. Adjusting the volume Use the VOLUME + / VOLUME - buttons to adjust the volume. A dialog will appear on the screen to aid you in adjusting the volume. If you do not do anything, the dialog will automatically disappear after a few seconds. ● When is selected for current picture input p...

Page 20 - VIDEO; ● It may take several seconds to project the images from the; USB TYPE B; COMPUTER

20 VIDEO DOC.CAMERA KEYSTONE ASPECT SEARCH BLANK MUTE MY BUTTON POSITION 1 2 MENU COMPUTER MY SOURCE/ AUTO MAGNIFY PAGE UP VOLUME DOWN ࡯ ON OFF 㧗 FREEZE 1. Press VIDEO button on the remote control. Each time you press the button, the projector switches its input port from the current port as below. ...

Page 21 - Selecting an aspect ratio; ● While ON is selected for AUTO SEARCH item in OPTION menu (; SEARCH; ASPECT

21 Operating Selecting an aspect ratio ● ASPECT button does not work when no proper signal is inputted. ● NORMAL mode keeps the original aspect ratio setting. 1. Press SEARCH button on the remote control. The projector will start to check its input ports as below in order to ﬁnd any input signals.Wh...

Page 22 - Adjusting the projector’s elevator; projector when twisting the feet.

22 Operating Adjusting the projector’s elevator When the place to put the projector is slightly uneven to the left or right, use the elevator feet to place the projector horizontally. Using the feet can also tilt the projector in order to project at a suitable angle to the screen, elevating the fron...

Page 23 - Adjusting the lens; FOCUS; ZOOM; ring; LOCK; VERTICAL; LOCK; so that the lens does not shift from the adjusted horizontal

23 Operating Adjusting the lens 1. Use the ZOOM ring to adjust the screen size. 2. Use the FOCUS ring to focus the picture. 3. Turn the VERTICAL adjuster fully counter clockwise. Then turn it clockwise and adjust the vertical lens position upward. 4. Turn the LOCK counter clockwise to loosen the loc...

Page 24 - Adjusting the position; POSITION; AUTO

24 Operating 1. Press POSITION button on the remote control when no menu is indicated. The “POSITION” indication will appear on the screen. Adjusting the position 2. Use the ▲/▼/◄/► cursor buttons to adjust the picture position.When you want to reset the operation, press RESET button on the remote c...

Page 25 - Correcting the distor tion

25 Operating Correcting the distor tion To correct the distortion of projected screen, you can select one of three options, AUTO, MANUAL and PERFECT FIT.AUTO: performs the automatic vertical keystone correction. ( 43 ) MANUAL: allows you to adjust the vertical and horizontal keystone. PERFECT FIT: a...

Page 27 - Using the magnify feature; Press the; MAGNIFY OFF; button on the remote control to exit magnification.

27 Operating 1. Using the magnify feature 2. MAGNIFYON/OFF button VIDEO DOC.CAMERA KEYSTONE ASPECT SEARCH BLANK MUTE MY BUTTON 1 2 COMPUTER MY SOURCE/ AUTO MAGNIFY PAGE UP VOLUME DOWN ࡯ ON OFF 㧗 FREEZE 3. 4. 5. Press the MAGNIFY ON button on the remote control. The picture will be magniﬁed, and the ...

Page 28 - Temporarily blanking the screen; Temporarily freezing the screen; FREEZE; BLANK

28 1. Press BLANK button on the remote control. The BLANK screen will be displayed instead of the screen of input signal. Please refer to BLANK item in SCREEN menu ( 48 ). To exit from the BLANK screen and return to the input signal screen, press BLANK button again. Temporarily blanking the screen ●...

Page 29 - Using the menu function; MENU; RESET; ENTER; ESC

29 Operating VIDE O DOC.CAME RA KEY STONE ASP ECT SEA RCH BLA NK MUTE MY BUTT ON POSITION 1 2 ES C ENTER MENU RES ET COMPUTE R MY SOURC E/ AUTO MAGN IFY PAGE UP VOLUME DOWN ࡯ ON OFF 㧗 FREEZ E R MENU POSITION ESC ENTER MENU RESET E U POS R 1. To start the MENU, press the MENU button. The MENU you las...

Page 31 - EASY MENU

31 EASY MENU EASY MENU From the EASY MENU, items shown in the table below can be performed.Select an item using the ▲/▼ cursor buttons. Then perform it according to the following table. Item Description ASPECT Using the ◄/► buttons switches the mode for aspect ratio.See the ASPECT item in IMAGE menu...

Page 32 - Press the ► or

32 EASY MENU Item Description ECO MODE Using the ◄/► buttons turns off/on the Eco mode.See the ECO MODE item in SETUP menu ( 44 ). MIRROR Using the ◄/► buttons switches the mode for mirror status.See the MIRROR item in SETUP menu ( 44 ). RESET Performing this item resets all of the EASY MENU items e...

Page 33 - PICTURE menu; button to execute the; To adjust CUSTOM

33 PICTURE menu PICTURE menu From the PICTURE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. Item Description BRIGHTNESS Using the...

Page 36 - IMAGE menu; button to

36 IMAGE menu IMAGE menu From the IMAGE menu, items shown in the table below can be performed.Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. Item Description ASPECT Using the ▲/▼ button...

Page 37 - This function is unavailable for a signal from the; or; HDMI port

37 IMAGE menu Item Description V POSITION Using the ◄/► buttons adjusts the vertical position. Down Up • Over-adjusting the vertical position may cause noise to appear on the screen. If this occurs, please reset the vertical position to the default setting. Pressing the RESET button when the V POSIT...

Page 38 - The vertical position and horizontal position will be

38 IMAGE menu Item Description H PHASE Using the ◄/► buttons adjusts the horizontal phase to eliminate ﬂicker. Right Left • This item can be selected only for a computer signal or a component video signal. This function is unavailable for a signal from the LAN , USB TYPE A , USB TYPE B or HDMI port....

Page 39 - INPUT menu

39 INPUT menu INPUT menu From the INPUT menu, items shown in the table below can be performed.Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. Item Description PROGRESSIVE Using the ▲/▼ b...

Page 43 - SETUP menu; Item; ) is ON or the screen is adjusted by PERFECT FIT (; KEYSTONE; Using the ◄/► buttons corrects the vertical keystone distortion.

43 SETUP menu SETUP menu From the SETUP menu, items shown in the table below can be performed.Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. Item Description AUTO KEYSTONE Selecting thi...

Page 44 - below

44 SETUP menu Item Description KEYSTONE Using the ▲/▼ buttons corrects the vertical keystone distortion. Shrink the top of the image Shrink the bottom of the image. • The adjustable range of this function will vary among inputs. For some input, this function may not work well.• When the horizontal l...

Page 45 - Select OFF to disable the; MONITOR OUT; • You cannot select; COMPUTER IN1

45 Item Description STANDBY MODE Using ▲/▼ buttons switches the standby mode setting between NORMAL and SAVING. NORMAL SAVING When SAVING is selected, the power consumption in the standby mode is lowered with some functional restriction as below:• When SAVING is selected, the RS-232C communication c...

Page 46 - AUDIO menu; AUDIO OUT; port and built-in speaker of; port. It can be selected only for the picture input from

46 AUDIO menu AUDIO menu From the AUDIO menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or the ENTER button to execute the item. Then perform it according to the following table. Item Description VOLUME Using the ◄/► b...

Page 47 - MIC LEVEL; HIGH; MIC VOLUME; Low

47 AUDIO menu Item Description HDMI AUDIO Using the ▲/▼ buttons switches the mode for the HDMI audio.Check each of the two modes provided and select the suitable one for your HDMI audio device. 1 2 MIC LEVEL Using the ▲/▼ buttons switches the input level to match that of the microphone connected to ...

Page 48 - SCREEN menu; above

48 SCREEN menu SCREEN menu From the SCREEN menu, items shown in the table below can be performed.Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. Item Description LANGUAGE Using the ▲/▼/◄...

Page 51 - NAME and press the ► or; The SOURCE NAME menu will be displayed.; button to determine your icon selection.

51 SCREEN menu Item Description SOURCE NAME Each input port for this projector can have a name applied to it.(1) Use the ▲/▼ buttons on the SCREEN menu to select SOURCE NAME and press the ► or ENTER button. The SOURCE NAME menu will be displayed. (2) Use the ▲/▼ buttons on the SOURCE NAME menu to se...

Page 53 - MODE; CAPTIONS; CHANNEL

53 SCREEN menu Item Description C.C. (Closed Caption) The C.C. is the function that displays a transcript or dialog of the audio portion of a video, ﬁles or other presentation or other relevant sounds. It is required to have NTSC format video or 480i@60 format component video source supporting C.C. ...

Page 54 - OPTION menu; button to execute

54 OPTION menu OPTION menu From the OPTION menu, items shown in the table below can be performed.Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item, except for the items LAMP TIME and FILTER TIME. Then perform it according to the following ...

Page 55 - port during the corresponding time,

55 OPTION menu Item Description AUTO POWER OFF Using the ▲/▼ buttons adjusts the time to count down to automatically turn the projector off. Long (max. 99 minutes) Short (min. 0 minute = DISABLE) When the time is set to 0, the projector is not turned off automatically.When the time is set to 1 to 99...

Page 62 - OFF

62 OPTION menu Item Description SERVICE (continued) COMMUNICATION (continued) RESPONSE LIMIT TIME Select the time period to wait for receiving response data from other device communicating by the NETWORK BRIDGE and the HALF-DUPLEX through the CONTROL port. OFF 1s 2s 3s OFF: Select this mode if it is...

Page 63 - ports

63 OPTION menu Item Description SERVICE (continued) INFORMATION Selecting this item displays a dialog titled “INPUT_INFORMATION”. It shows the information about the current input. • The “FRAME LOCK” message on the dialog means the frame lock function is working. • The “SCART RGB” message means the C...

Page 64 - button on the remote control to execute the item. Then; User’s Manual - Network Guide; for details of NETWORK operation.; NETWORK menu; • If you are not utilizing SNTP; User’s; , then you must set the DATE AND TIME during the; button on the remote

64 NETWORK menu Remember that incorrect network settings on this projector may cause trouble on the network. Be sure to consult with your network administrator before connecting to an existing access point on your network.Select “NETWORK” from the main menu to access the following functions. Select ...

Page 67 - Image Tool; that can be downloaded

67 NETWORK menu Item Description MY IMAGE Selecting this item displays the MY IMAGE menu. To store images in the projector, the application software PJImg/Projector Image Tool that can be downloaded from our website is required. Use the ▲/▼ buttons to select an item which is a still image by the MY ...

Page 68 - PRESENTATION; button to use the function.; Presenter mode; User's Manual – Network Guide; computer on full screen.

68 NETWORK menu Item Description PRESENTATION Selecting this item displays the PRESENTATION menu.Use ▲/▼ buttons to select one of the following items, then press ► or ENTER button to use the function. QUIT PRESENTER MODE If you set a computer to the Presenter mode while its image is projected, the p...

Page 70 - • For the details of PASSCODE, see the section; Selecting the; User’s manual – Network; Then use the button ► to execute.

70 NETWORK menu Item Description INFORMATION Selecting this item displays the NETWORK_INFORMATION dialog for conﬁrming the network settings. • For the details of PASSCODE, see the section Selecting the network connection method in the User’s manual – Network Guide. • Only the first 16 characters of ...

Page 71 - Enter the SECURITY menu; SECURITY menu

71 SECURITY menu This projector is equipped with security functions.From the SECURITY menu, items shown in the table below can be performed.To use SECURITY menu: User registration is required before using the security functions. Enter the SECURITY menu 1. Use the ▲/▼ buttons on the SECURITY menu to ...

Page 72 - MyScreen; Turning on the MyScreen PASSWORD; Turning off the MyScreen PASSWORD

72 SECURITY menu Item Description MyScreen PASSWORD The MyScreen PASSWORD function can be used to prohibit access to the MyScreen function and prevent the currently registered MyScreen image from being overwritten. 1 Turning on the MyScreen PASSWORD 1-1 Use the ▲/▼ buttons on the SECURITY menu to se...

Page 77 - Presentation tools; USB TYPE A; USB TYPE A; port as the input source.

77 Presentation tools Presentation tools The PC-LESS Presentation reads image data from storage media inserted into the USB TYPE A port and displays the image on the following modes. The PC-LESS Presentation can be started by selecting the USB TYPE A port as the input source. This feature allows you...

Page 78 - Thumbnail mode; Thumbnail menu

78 Presentation tools Thumbnail mode PC-LESS Presentation (continued) The Thumbnail mode displays the images stored in a USB storage device on the Thumbnail screen. Maximum 20 images are displayed in a screen.If you wish, you can jump into the Full Screen mode or Slideshow mode, after you select som...

Page 79 - The SETUP menu for the selected image; Operating by buttons or keys; Move cursor

79 Presentation tools PC-LESS Presentation (continued) The SETUP menu for the selected image Item Functions SETUP Use the ◄/► cursor buttons to switch each setting or use the ► cursor button to execute the functions as follows. RETURN Press the ► cursor button or ENTER to return to the Thumbnail scr...

Page 80 - Operating by the menu on the Thumbnail screen

80 Presentation tools You can also control the images by using the menu on the Thumbnail screen. PC-LESS Presentation (continued) Operating by the menu on the Thumbnail screen Item Functions Moves to an upper folder. SORT Allows you to sort ﬁles and folders as following. RETURN Press the ► cursor bu...

Page 81 - button when the

81 Presentation tools PC-LESS Presentation (continued) • These operations are not accessible while the projector OSD is displayed. • The Thumbnail mode shows 20 pictures in 1 page as maximum.• It is not possible to change the input port by using the INPUT button when the Thumbnail screen, Slideshow,...

Page 82 - button on the; button on the keypad, or click; Full Screen Mode; Button operation; Shows the next picture.; • It is not possible to change the input port by using the; Full screen display

82 Presentation tools PC-LESS Presentation (continued) The Full Screen mode shows a full display image. To display in Full Screen mode, select an image in the Thumbnail screen. Then press the ENTER button on the remote control or the INPUT button on the keypad, or click [ENTER] on the Web Remote Con...

Page 83 - Slideshow mode; Displays thumbnail

83 Presentation tools PC-LESS Presentation (continued) Slideshow mode The following operations can be accessible while the Slideshow is displayed. * These operations are not accessible while the projector OSD is displayed. • It is not possible to change the input port by using the INPUT button when ...

Page 85 - Playlist; “rot3” increase another 90 degrees in order.

85 Presentation tools PC-LESS Presentation (continued) Playlist The Playlist is a DOS format text ﬁle, which decides the order of displayed still image ﬁles in the Thumbnail or Slideshow.The playlist ﬁle name is “playlist.txt” and it can be edited on a computer. It is created in the folder that cont...

Page 86 - port on the projector using a USB cable, the; Hardware and software requirement for computer; Windows; • The “LiveViewer” (refer to the; Manual - Network Guide; ) and this application

86 Presentation tools USB Display The projector can display images transferred from a computer via an USB cable ( 10 ). Select the USB DISPLAY for the USB TYPE B item in the OPTION menu. When you connect your computer to the USB TYPE B port on the projector using a USB cable, the projector will be r...

Page 87 - Floating menu

87 Presentation tools Display : The Floating menu is displayed, and the icon disappears from the Windows notiﬁcation area. Quit : The application is closed, and the icon disappears from the Windows notiﬁcation area. The menu shown in the right will be displayed when you right-click the application i...

Page 88 - Optimize Perfor mance; Transmission speed; Keep PC resolution; Options window; About

88 Presentation tools If you select the Option button on the Floating menu, the Options window is displayed. Optimize Perfor mance The “LiveViewer Lite for USB” captures screenshots in JPEG data and sends them to the projector. The “LiveViewer Lite for USB” has two options that have different compre...

Page 89 - Replacing the lamp; lamp cover; Handles

89 Maintenance Maintenance A lamp has ﬁnite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and early ...

Page 90 - Lamp war ning; HIGH VOLTAGE; ►The projector uses a high-pressure mercury glass lamp. The lamp; About disposal of a lamp:; This product contains a mercury lamp do not put

90 Maintenance Lamp war ning Replacing the lamp (continued) HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE ►The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a di...

Page 91 - Cleaning and replacing the air filter; Filter cover; Turn the projector off, and unplug the power

91 Maintenance Cleaning and replacing the air ﬁlter Please check and clean the air ﬁlter periodically. When the indicators or a message prompts you to clean the air ﬁlter, comply with it as soon as possible.The air ﬁlter of this projector consists of a ﬁlter cover and a ﬁlter unit with two types of ...

Page 92 - ► Before taking care of the air filter, make sure the power cable; (3) Press the ► cursor button to select the “OK” on the dialog. It performs

92 Maintenance ► Before taking care of the air ﬁlter, make sure the power cable is not plugged in, then allow the projector to cool sufﬁciently.►Use only the air ﬁlter of the speciﬁed type. Do not use the projector without the air ﬁlter or the ﬁlter cover. It could result in a ﬁre or malfunction to ...

Page 93 - Replacing the inter nal clock batter y; HITACHI; Raised dot; OPEN

93 Maintenance Replacing the inter nal clock batter y This projector has internal clock that uses a battery. When the clock of the network function does not work correctly, please try solution by replacement of the battery: HITACHI MAXELL , part number CR2032 or CR2032H . OPEN CLOSE OPEN CLOSE OPEN ...

Page 94 - Other care; ►Before caring, make sure the power cord is not plugged in,; Inside of the projector

94 Maintenance Other care In order to ensure the safe use of your projector, please have it cleaned and inspected by your dealer about once every year. 1. Turn the projector off, and unplug the power cord. Allow the projector to cool sufﬁciently. 2. After making sure that the projector is cool adequ...

Page 95 - Troubleshooting; ►Never use the projector if abnormal operations such as smoke,; Related messages; Message; There is no input signal.

95 Troubleshooting Troubleshooting If an abnormal operation should occur, stop using the projector immediately. Otherwise if a problem occurs with the projector, the following checks and measures are recommended before requesting repair. If this does not resolve the problem, please contact your deal...

Page 96 - The internal temperature is rising.; section of this manual. After you have cleaned or; The button operation is not available.

96 Message Description The internal temperature is rising. Please turn the power off, and allow the projector to cool down at least 20 minutes. After having conﬁrmed the following items, please turn the power ON again. • Is there blockage of the air passage aperture? • Is the air ﬁlter dirty? • Does...

Page 97 - Regarding the indicator lamps; When operation of the; LAMP; and; indicators differs from usual,; SECURITY; indicator, see SECURITY INDICATOR in the SECURITY menu.; Green; Orange; Red; Red; Red; Red; Red

97 Troubleshooting Regarding the indicator lamps When operation of the LAMP , TEMP and POWER indicators differs from usual, check and cope with it according to the following table.For the SECURITY indicator, see SECURITY INDICATOR in the SECURITY menu. POWER indicator LAMP indicator TEMP indicator D...

Page 98 - Regarding the indicator lamps (continued); Blinking; It is time to clean the air filter.; blinking in; Shutting the projector down; ), please push the shutdown switch using; Resetting all settings; ) can reset all settings (except settings such

98 Troubleshooting Regarding the indicator lamps (continued) • When the interior portion has become overheated, for safety purposes, the projector is automatically shut down, and the indicator lamps may also be turned off. In such a case, disconnect the power cord, and wait at least 45 minutes. Afte...

Page 99 - Phenomena that may be easy to be mistaken for machine defects; Phenomenon; Power does not; The electrical power cord is not plugged in.; Correctly connect the power cord.; Neither sounds; The signal cables are not correctly connected.; Correctly connect the connection cables.; Signal source does not correctly work.; Select the input signal, and correct the settings.

99 Troubleshooting Phenomena that may be easy to be mistaken for machine defects About the phenomenon confused with a machine defect, check and cope with it according to the following table. Phenomenon Cases not involving a machine defect Reference page Power does not come on. The electrical power c...

Page 100 - The mode selected for HDMI AUDIO is not suitable.; port is selected as the input

100 Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Phenomenon Cases not involving a machine defect Reference page Sound does not come out. The signal cables are not correctly connected. Correctly connect the audio cables. 10 ~ 14 The MUTE function is workin...

Page 101 - The projector is operating in Eco mode.

101 Phenomenon Cases not involving a machine defect Reference page Video screen display freezes. The FREEZE function is working. Press FREEZE button to restore the screen to normal. 28 Colors have a faded- out appearance, or Color tone is poor. Color settings are not correctly adjusted. Perform pict...

Page 102 - • Although bright spots or dark spots may appear on the screen, this

102 Phenomenon Cases not involving a machine defect Reference page The computer connected to the USB TYPE B port of the projector does not start up. The computer cannot start up in the current hardware conﬁguration. Disconnect the USB cable from the computer, then reconnect it after starting up the ...

Page 103 - Please see the

103 Speciﬁcations Speciﬁcations Please see the Speciﬁcations in the User’s Manual (concise) which is a book. End User License Agreement for the Projector Software • Software in the projector consists of the plural number of independent software modules and there exist our copyright or/and third part...