Hitachi C 6SS - Manuals - manualsarea.com

Page 3 - CONTENTS

CONTENTS Page SELLING POINTS ------------------------------------------------------------------------------------------------------------- 1 SPECIFICATIONS ------------------------------------------------------------------------------------------------------------- 2 1. Specifications --------------...

Page 4 - SELLING POINTS

-1- Compact and lightweight design The Models C 6SS and C 7SS adopt the highly evaluatedcompact design of the C 6MFA/C 7MFA, and incorporate alight-weight, highly rigid lower guard and a side handlemade of resin to reduce overall weight. Power-plus heavy-duty motor The cooling flow path is enhanced ...

Page 5 - SPECIFICATIONS

-2- 1. Specifications Model C 6SS C 7SS Saw blade diameter 165 mm (6-1/2") 190 mm (7-1/2") at 90° 0 to 57 mm (0 to 2-1/4") 0 to 68 mm (0 to 2-11/16") Cutting depth at 45° Max. 38 mm (1-1/2") Max. 46 mm (1-13/16") Power source AC single phase 50/60 Hz Type of motor AC single p...

Page 6 - Comparison of Specifications; COMPARISONS WITH SIMILAR PRODUCTS

-3- L W H 1. Comparison of Specifications (1) 165mm (6") dia. saw blade (Superior specifications: ) Maker HITACHI Model C 6SS C 6MFA C 6SF C 6MF D1 Saw blade diameter mm 165 (6-1/2") 165 (6-1/2") 90 㩩 mm 57 (2-1/4") 56 (2-7/32") Max.cuttingdepth 45 㩩 mm 38 (1-1/2") 37 (1-15/3...

Page 8 - Safety Instructions; A. Instruction manual; PRECAUTIONS ON SALES PROMOTION

-5- 1. Safety Instructions In the interest of promoting the safest and most efficient use of the C 6SS and C 7SS Circular Saws by allof our customers, it is very important when concluding a sale that the salesperson carefully ensure that thebuyer seriously recognizes the importance of the Instructio...

Page 9 - Precautions on Disassembly and Reassembly; Removal of the Protective Cover; Disassembly

-6- Before disassembly, be sure to remove the saw blade to prevent damage to the cutting edge or personalinjury due to the saw blade. 1. Precautions on Disassembly and Reassembly The disassembly and reassembly procedures are described below, as well as certain precautions. Thenumbers in the descript...

Page 11 - Removal of the Base

-8- Fig. 4 7. Removal of the Base (a) Align the bevel plate hole of Base [68] with the Gear Cover Ass’y [26] and then press-fit Roll Pin D6 x 50 [58] . (b) Loosen the Seal Lock Screw (W/Sp. Washers) M6 x 14 [62] , and then remove Lever (A) [63] , the Lock Nut [65] , Washer (C) [67] and Bolt (Square)...

Page 12 - Reassembly

-9- Fig. 5 Fig. 6 Perform reassembly by reversing the order of the disassembly procedure. However, special attentionshould be given to the following items. 1. Reassembly of the Bearing Lock and Thrust Washer Before installing the Armature [23] , be sure to install the Bearing Lock [18] and Thrust Wa...

Page 15 - Tightening torque values for selected fasteners; Deflection of saw blade

-12- Models Measuring points Allowable level C 6SS, C 7SS 150 0.3 mm max. 8. Tightening torque values for selected fasteners • Bolt (W/Washer) M7 x 17.5 [14] ------------------------------------- 9.8 r 2.0 N•m (100 r 20 kgf•cm) • Seal Lock Screw (W/Sp. Washers) M6 x 14 [62] --------------- 2.9 r 0.5...

Page 18 - PARTS

PARTS C 6SS DESCRIPTION REMARKS 1 963-803 METAL 1 * 2 322-088 SPINDLE AND GEAR SET 1 * 2 331-705 SPINDLE AND GEAR SET 1 FOR CHI, PAN, MEX 3 308-361 BEARING HOLDER 1 4 305-568 SEAL LOCK FLAT HD. SCREW M5 X 12 2 5 331-266 PROTECTIVE COVER 1 6 331-268 RETURN SPRING 1 7 600-2VV BALL BEARING 6002VVCMPS2L...

Page 20 - STANDARD ACCESSORIES

C 6SS DESCRIPTION REMARKS 501 944-459 HEX. BAR WRENCH 5MM 1 502 302-756 GUIDE 1 DESCRIPTION REMARKS 601 302-981 DUST COLLECTOR SET (D) 1 602 322-099 WASHER (A) 1 - 4 - Printed in Japan 06 - 09 (090618N) *ALTERNATIVE PARTS NO. USED CODE NO. ITEM NO. NO. USED CODE NO. ITEM NO. STANDARD ACCESSORIES OPT...

Page 21 - Model C 7SS

A A Rev.1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 40 41 38 39 42 43 44 45 46 47 29 30 31 32 33 34 36 37 35 51 52 53 56 57 58 59 60 18 61 62 65 67 68 28 501 C7SS TU01695 ᒻޓޓޓฬ ࿑ޓޓޓ⇟ ዤޓᐲ 33.3% 502 50 49 48 55 54 64 66 503 63 Model C 7SS CIRCULAR SAW LIST NO. E520 (E1) 2...