Hitachi AX-M140 - Manuals

- 5 - Connection Caution: Please turn off all the equipment power before connecting. Connect to the TV Connecting diagram Safety precautions S o m e s e t t i n g s s h o u l d b e m a d e f o r t h e u n i taccording to the TV connection.* According to the colour system setting of TV, select the co...

- 6 - Connecting Control Cable With the unit unplugged from the mains connectthe power control cable to the DVD player, MP3player, the amplifier and the radio via the connec-tions on the rear of the units as shown . Connect to the amplifier with digital signal input terminal Connection precautions P...

- 7 - Connecting to a PC The AX-M140 can be connected to a PC via theUSB (B) Port on the rear of the unit. Music files onyour PC can then be transferred to the Music bankfor storage and play back through the AX-M140 Hi-Fi. Your PC should see the AX-M140 Music bank asan external hard drive/storage de...

- 9 - Remote control 6. Clock Dimmer (In standby mode)Loudness 7. Preset Equalizer 8. Volume Up 9. Fast ReverseMenu Select Down 10. Volume Down11. Previous Information 12. Play/Pause Menu Confirm 13. Repeat14. Number15. Direction ( )16. Enter Button17. PBC Menu 18. Function Setting19. Subtitle20. OS...

- 10 - Installation of Batteries in the Remote Control 1. Remove the battery compartment cover.2. Insert two batteries (size AAA) correctly, so that the + and - polarities match the polarity diagrams in the battery compartment. * About half a year of normal operation can be expected when using stand...

- 11 - Press the stop/return button ( L ) to stop playing, the unit will store the last playing time in the memory automatically, then press the play/pause button ( BF ), the unit will resume to last memory time and continue playback automatically.If you press the stop/return button ( L ) twice to s...

- 14 - l When playing CD disc, press the intro button ( INTRO ) to play the beginning of each track consecutively. The playing time of each track is 10 seconds. l When playing a Video CD disc (except for CD disc), press the intro button ( INTRO ) to enter the thumbnail function, the menu will displa...

- 15 - General Setup Page TV Display This menu allows the user to select the aspect ratio ofthe TV to be connected. Angle Mark Available only when the disc is recorded with anglemarks, you can set the angle mark to show on the TVscreen or not. OSD Language This menu allows the user to select the lan...

- 16 - Preference Page Audio, Subtitle, Disc Menu You can select subtitles, different audio tracks and languages in this menu, if available. Parental Setup this system when playing a disc which has agecontrol. Default Restore to factory setting. Password Setup Page Password Mode Select this item to ...

- 17 - Note: When playing a picture CD, press the L button to enter the “Thumbnail Mode”, use the , , , buttons to move the cursor to illuminate the “MENU” then press the ENTER button to enter the “Remote Key Function” list. l You may need use the K button on the unit to stop playing and open the di...

- 19 - w ww ww INFO Button (Unit and Remote) If the INFO button is held down for more than 2 seconds, then this causes the advanced information display to be shown. When the info button is clicked or held subsequently, then the info displayreturns to the start of the cycle.Pressing INFO once will gi...

- 20 - FM Radio w ww ww System Reset To reset switch off, then back on at mains supply. Press and hold “ CONFIRM ” knob/button and press “ STANDBY ”. Continue to hold “ CONFIRM ” until the unit displays “System Reset”. FM Radio will go into scan mode. w ww ww State Display (Tuned) When a user has tu...

- 21 - w ww ww Signal Quality The bottom line displays a graphical representation of the signal quality of the station currently beingdemodulated.Poor signal quality… Good signal quality… This display will be continuously updated so that the user can use it to position the radio to obtain thebest re...

- 22 - Press the G button once or more to skip forward one or more tracks. (You can also operate the key “ G ” on the panel of MP3 player.) l In playing mode, you can have the hard disk or USB device played in a random order bypressing the RANDOM button. l In stop mode, press the menu setting button...

- 23 - Recording 1. Before recording, please firstly confirm whether the menu is setup to the record setting you need. 2. Place the disc on the disc tray correctly and press play. Press the REC button ( REC ) to select the record mode, the “REC TO HARD DISK” will be displayed on the VFD. 3. Press th...

- 24 - WMA files “can” have DRM protection. In this case the file content is encrypted with a key. Forplayback and decoding it is necessary to have DRM license files on your computer. DRMlicense can limit your rights for using these functions. For instance, it can allow only play-back and prohibit c...

- 25 - Setting the Daily Timer l In standby mode, you can use the daily timer setting to turn the unit on automatically at acertain time everyday under standby mode. When the setting timer is on, the timerindictor “ ” will display on the VFD, however the clock must be set correctly for the timerfunc...

- 26 - Protect the Disc 1. To keep the disc clean, please don’t touch the disc’s surface when you are holding it. You should hold the edge. 2. If the disc is dirty, it will affect the sound quality. Please use the clean and soft cloth to wipe the disc from inside to outside. Don’t wipe the disc in c...

- 27 - Specification System Power supply ............................................................. ~230V / 50 HzRated working power consumption .......................... £ 130W Channel ..................................................................... ³ 40dB Distortion .........................