Page 2 - IMPORTANT; Follow all warnings and instructions marked on this television.; CAUTION; POWER SOURCE; or
IMPORTANT 2 SAFETY POINTS YOU SHOULD KNOW ABOUT YOUR HITACHI TELEVISION Our reputation has been built on the quality, performance, and ease of service of HITACHI televisions. Safety is also foremost in our minds in the design of these units. To help you operate these products properly, this sec-tion...
Page 3 - Read before operating equipment; PREVENTION OF SCREEN BURN; by your HITACHI Factory Warranty.; PUBLIC VIEWING OF COPYRIGHTED MATERIAL
IMPORTANT 3 Read before operating equipment Follow all warnings and instructions marked on this television. 1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with a dry cloth.7. Do not block any...
Page 4 - ACCESSORIES; REMOTE CONTROL BATTERY INSTALLATION AND REPLACEMENT; BOTTOM VIEW
ACCESSORIES 4 1. Simple Remote Control Unit CLU-121S (Part No. HL01862).2. Remote Control Unit CLU-5721TSI (Part No. HL01821).3. Two “AA” size, 1.5V batteries (For Remote Control Unit).4. Two “AAA” size, 1.5V batteries (for Simple Remote Control Unit).5. Two IR Mouse Cables (Part No. EY01641). REMOT...
Page 5 - HOW TO SET UP YOUR NEW HITACHI PROJECTION TV; ANTENNA; BEST
HOW TO SET UP YOUR NEW HITACHI PROJECTION TV 5 CAUTION: Magnetic fields, such as those of external speakers, may cause the picture to distort if they are placed too closeto the television. Move the magnetic field source away from the television until there is no picture distortion. S S L R 4' MINIMU...
Page 6 - HOOK-UP CABLES AND CONNECTORS
HOOK-UP CABLES AND CONNECTORS 6 ANTENNA CONNECTIONS TO REAR JACK PANEL VHF (75-Ohm) antenna/CATV (Cable TV) When using a 75-Ohm coaxial cable system, connect the outdoor antenna or CATVcoaxial cable to the ANT A (75-Ohm) terminal. If you have a second antenna orcable TV system, connect the coaxial c...
Page 7 - FRONT PANEL CONTROLS; POWER; CHANNEL selector; Press this button to turn the TV on or off.; MAGIC FOCUS
FRONT PANEL CONTROLS 7 INPUT 5 S-VIDEO VIDEO AUDIO L/MONO R EXIT INPUT SELECT MENU MAGIC FOCUS VOL- VOL+ CH- CH+ POWER PULL POWER MENU/SELECT button This button allows you to enter the MENU, making it possible to set TV features to your preference without using the remote. Thisbutton also serves as ...
Page 8 - FRONT PANEL JACKS AND CONNECTORS
FRONT PANEL JACKS AND CONNECTORS 8 The front panel jacks are provided as a convenience to allow you to easily connect a camcorder or VCR as shown in the followingexamples: NOTE: 1. Completely insert connection cord plugs when connecting to front panel jacks. If you do not, the played back picture ma...
Page 9 - REAR PANEL JACKS; only when ANT B is displayed as a main picture.
REAR PANEL JACKS 9 Antenna Input/OutputANT A - A 75-Ohm RF antenna or CATV (Cable TV) input. ANT A can be displayed as a main picture or sub-picture. ANT B - A 75-Ohm RF antenna or CATV (Cable TV) input. ANT B can only be displayed as a main picture. ANT B cannot be displayed as a sub-picture. TO CO...
Page 10 - Inputs; Inputs 1 and 2 provide Y-P; the components R-Y output to the TV’s PR input.; IR Blaster; Digital and PCM compatible, such as an audio amplifier.; Multi Media Card Slot; on the screen in its digital form.
REAR PANEL JACKS 10 Component: Y-P B P R Inputs Inputs 1 and 2 provide Y-P B P R jacks for connecting equipment with this capability, such as a DVD player or Set Top Box. You may use composite video signal for INPUT:2. NOTES: 1. Do not connect composite VIDEO and S-VIDEO to Input 3, 4 or 5 at the sa...
Page 11 - REAR PANEL CONNECTIONS; Connect only 1 component to each input jack.; TYPICAL FULL-FEATURE SETUP
REAR PANEL CONNECTIONS 11 NOTES: 1. Connect only 1 component to each input jack. 2. Follow connections that pertain to your personal entertainment system. 3. Composite video signal can be input to Input2~Input5. 4. Cables are not included with the purchase of this TV, except when noted as “provided”...
Page 12 - TIPS ON REAR PANEL CONNECTIONS; and the components R-Y output to the TV’s PR input.
TIPS ON REAR PANEL CONNECTIONS 12 S-VIDEO connections are provided for high performance laserdisc players, VCRs etc. that have this feature. Use these connectionsin place of the standard video connection if your device has this feature. If your device has only one audio output (mono sound), connect ...
Page 13 - CONNECTING EXTERNAL AUDIO SOURCES; the sound using the remote control of the TV set.; REAR PANEL OF TELEVISION
CONNECTING EXTERNAL AUDIO SOURCES 13 To control the audio level of an external audio amplifier with the TV remote control, connect the system as shown below. NOTES: 1. To prevent damage to the speaker and distorted sound, set the volume control of the audio amplifier lower and adjust the sound using...
Page 14 - Only ANT C has optical audio output capability.; TYPICAL STEREO SYSTEM SETUP
CONNECTING EXTERNAL AUDIO SOURCES 14 P B P R CENTER IN P B P R DVI-HDTV ANT A TOCONVERTER ANT B L Y R (MONO)/L IRBLASTER AUDIOTO HI-FI R S-VIDEO S-VIDEO S-VIDEO Y/VIDEO R (MONO)/L R (MONO)/L VIDEO R (MONO)/L VIDEO R L VIDEO INPUT 1 INPUT 2 INPUT 3 INPUT 4 MONITOR OUT AUDIO AUDIO AUDIO ANT C (DTV) Mu...
Page 15 - CONNECTING EXTERNAL VIDEO SOURCES; CONNECTING A MONAURAL AUDIO SOURCE TO INPUT2~INPUT5; Press the ANT button to return to the previous channel.; Before Operating External Video Source
15 CONNECTING EXTERNAL VIDEO SOURCES CONNECTING A MONAURAL AUDIO SOURCE TO INPUT2~INPUT5 1. Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack, as shown on the TV set below. 2. Connect the cable from the AUDIO OUT of the VCR or the laserdisc player to t...
Page 16 - CONNECTING A STEREO SOURCE TO INPUT2~INPUT5
16 CONNECTING EXTERNAL VIDEO SOURCES CONNECTING A STEREO SOURCE TO INPUT2~INPUT5 1. Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack, as shown on the TV set below. 2. Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INP...
Page 17 - CONNECTING AN S-VIDEO SOURCE TO INPUT 3, 4 AND 5
17 CONNECTING EXTERNAL VIDEO SOURCES CONNECTING AN S-VIDEO SOURCE TO INPUT 3, 4 AND 5 1. Connect the cable from the S-VIDEO OUT of the VCR or the laserdisc player to the INPUT (S-VIDEO) jack, as shown on the TV set below. 2. Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player t...
Page 18 - CONNECTING A COMPONENT SOURCE WITH DVI-HDTV CAPABILITY TO INPUT 1; played back will be abnormal if the connection is loose.
18 CONNECTING EXTERNAL VIDEO SOURCES CONNECTING A COMPONENT SOURCE WITH DVI-HDTV CAPABILITY TO INPUT 1 1. Connect the DVI connection cable from the output of the HDTV set top box or DVD player to the DVI-HDTV input as shown on the TV set below. 2. Connect the cable from the AUDIO OUT R of the HDTV s...
Page 20 - Press the MENU button on the Remote Control and select SETUP.; connect from 1st device when making connection to 2nd device).
20 CONNECTING EXTERNAL VIDEO SOURCES CONNECTING A COMPONENT SOURCE WITH DIGITAL INTERFACE CAPABILITY TO IEEE1394 TERMINALS 1. Connect the IEEE1394 cable from the output of the component with IEEE1394 capability, such as a Set-Top-Box or Digital VCR, to the IEEE1394 input terminals shown on the TV se...
Page 21 - CONNECTING A/V NETWORK; Press the A/V NET button on the remote control. Use THUMB STICK
21 CONNECTING A/V NETWORK Your Hitachi Television is equipped with an A/V Network feature. This feature helps to control your external Audio/Video equipment(VCR, Set Top Box, DVD, etc.). Once this is setup, it allows your IR Mouse connector to control your equipment using your HitachiTV Remote Contr...
Page 22 - A/V NETWORK SETUP WIZARD; There are six steps in the setup procedure (VCR setup example below).; Enter “9999” to uninstall the equipment from your A/V Network.
22 A/V NETWORK SETUP WIZARD There are six steps in the setup procedure (VCR setup example below). HITACHI AV NET Wizard (step 1 of 6) This Wizard helps you with VCR connections and settings. Would you like to setup or modify your VCR? BACK NEXT HITACHI AV NET Wizard (step 2 of 6) Follow the digrams ...
Page 24 - THE REMOTE CONTROL; LIGHT BUTTON; When you are in a dark room, press the light button
24 THE REMOTE CONTROL In addition to controlling all the functions on your HITACHI Projection TV, the new remote control is designed to operate differenttypes of VCRs, CATV (Cable TV) converters, set-top-box, satellite receiver, DVD players, and other audio equipment with onetouch. Basic operation k...
Page 25 - HOW TO USE THE REMOTE TO CONTROL YOUR TV; POWER button
25 HOW TO USE THE REMOTE TO CONTROL YOUR TV POWER button Press this button to turn the TV set on or off when the remote is in TV mode. (See page 24 for instructions on how to set the remotecontrol to TV mode.) TV button When the TV button is pressed, it will blink, to indicate the remote is in TV mo...
Page 26 - CHANNEL selector buttons; YP
26 HOW TO USE THE REMOTE TO CONTROL YOUR TV CD, TAPE, AMP buttons When pressed, each of these buttons will blink to indicate the remote is in Audio mode. (see page 40) CHANNEL selector buttons CHANNEL selector buttons are used to select channels, lock access code, etc.Enter one, two, or three number...
Page 28 - ASPECT button; When in ANT C, signal format is dependent on broadcaster.
28 HOW TO USE THE REMOTE TO CONTROL YOUR TV ASPECT button Press this button to quickly change the picture format ASPECT ratio. Depending on the input signal format received, the picture format ratio allows you to adjust the images through the following options. 4:3 STANDARD Use this aspect mode to d...
Page 29 - VIRTUAL HD button
29 HOW TO USE THE REMOTE TO CONTROL YOUR TV VIRTUAL HD button Press this button to toggle between 1080i and 540p (This feature is not available while in ANT C mode). MENU button The MENU button will start the On-Screen Display. EXIT button When in MENU mode, this button will exit all On-Screen Displ...
Page 30 - See separate section on pages 33-35 for a description.; PIP CH button; Press this button to directly access the VIDEO adjustment menu.; TAKA; ANT
30 HOW TO USE THE REMOTE TO CONTROL YOUR TV PICTURE-IN-PICTURE buttons See separate section on pages 33-35 for a description. PIP CH button Use the PIP CH button to select between main picture and sub-picture tuning. The channel number which is highlighted indicateswhat channel is being controlled. ...
Page 31 - GUIDE button; Use THUMB STICK
31 HOW TO USE THE REMOTE TO CONTROL YOUR TV Move SEL Select GUIDE Channel Guide Event Timer American Family Ant C 15-1 Silence of God KPBS-HD 4:00PM 5:00PM TV-PG CC 5.1ch Anne of Green Gables 15-2 TV-PG CC 5.1ch XETV-DT KPBS-HD GUIDE GUIDE button The GUIDE button only works while in ANT C mode (DTV)...
Page 33 - PIP button; Only sound from the main picture can be heard.; Main Picture
33 Use above connection to view VCR program as a sub-picture while viewing another program as main picture (ANT A, ANT B, ANTC, V:1, V:2, V:3, V:4, or V:5). You may also view the VCR program as a main picture while viewing another program as a sub-picture(ANT A, ANT C, V:1, V:2, V:3, or V:5). PIP bu...
Page 34 - SWAP button; Closed Caption will not appear when SURF mode is on.; PIP MODE button; PIP MODES will depend on the type of signal format received.; SPLIT
PICTURE-IN-PICTURE (PIP) 34 SPLIT MODE PICTURE-IN-PICTURE Split Mode PIP displays the main picture and sub-picture evenly on the screen. SURF MODE PICTURE-IN-PICTURE This feature will automatically scan all active channel numbers (those set in memory) and display them as PIP sub-pictures, Pressthe P...
Page 36 - USING THE REMOTE TO CONTROL VCR FUNCTIONS; Operating the precoded function for your VCR.
36 USING THE REMOTE TO CONTROL VCR FUNCTIONS Operating the precoded function for your VCR. This remote is designed to operate different types of VCRs. You must first program the remote to match the remote system of your VCR.(refer to page 42 for pre-codes) 1. Turn ON your VCR. 2. Aim the remote cont...
Page 37 - USING THE REMOTE TO CONTROL CABLE BOX FUNCTIONS; Operating the precoded function for your cable box.; Turn ON your cable box.; PRECODED CABLE BOX buttons; These buttons transmit the chosen precoded cable codes.; EXCLUSIVE TV buttons; These buttons are for operating the TV.; MY CABLE BOX CODE IS:
37 USING THE REMOTE TO CONTROL CABLE BOX FUNCTIONS Operating the precoded function for your cable box. This remote is designed to operate different types of cable boxes. You must first program the remote to match the remote system of yourcable box. (refer to page 42) 1. Turn ON your cable box. 2. Ai...
Page 38 - USING THE REMOTE TO CONTROL
38 USING THE REMOTE TO CONTROL SET-TOP-BOX/SATELLITE RECEIVER FUNCTIONS Operating the precoded function for your set-top-box/satellite receiver. This remote is designed to operate different types of set-top-box/satellite systems. You must first program the remote to match theremote system of your se...
Page 39 - USING THE REMOTE TO CONTROL DVD FUNCTIONS; Operating the precoded function for your DVD player.; MY DVD PLAYER CODE IS:
39 USING THE REMOTE TO CONTROL DVD FUNCTIONS Operating the precoded function for your DVD player. This remote is designed to operate different types of DVD players. You must first program the remote to match the remote system ofyour DVD player. (refer to page 42 for pre-codes) 1. Turn ON your DVD pl...
Page 40 - Operating the precoded function for your Audio component.; MY AUDIO EQUIPMENT CODE IS:
40 USING YOUR REMOTE TO CONTROL ADDITIONAL AUDIO EQUIPMENT Operating the precoded function for your Audio component. This remote is designed to operate different types of Audio component. You must first program the remote to match the remote systemof your Audio component. (refer to page 42 for pre-c...
Page 41 - THE SIMPLE REMOTE CONTROL; Press Power button to turn the TV set ON or OFF.
41 THE SIMPLE REMOTE CONTROL MUTE FAV CH SELECT VOL + CH - CH + A/V NET VOL - MENU ANT POWER EXIT/ASPECT POWER button Press Power button to turn the TV set ON or OFF. CH+ ( ), CH- ( ) Press the CH+ ( ) up or CH- ( ) down buttons to select desired channel or to navigate the on screen display features...
Page 42 - AUDIO CODES FOR REMOTE CONTROL
42 VCR, CABLE, SATELLLITE, DVD and AUDIO CODES FOR REMOTE CONTROL VCR BRAND. . . . . . . . . . . . . . . . . CODE Adventura . . . . . . . . . . . . . . . . . . . . . . 01Aiko . . . . . . . . . . . . . . . . . . . . . . . . . . . 09Aiwa . . . . . . . . . . . . . . . . . . . . . . . . . . 01Akai . . ....
Page 45 - P i c t u r e M o d e; NOTE: MOVIE MODE 3:2 PULLDOWN DETECTION SPECIAL FEATURE
VIDEO 45 Select VIDEO to adjust picture settings and improve picture quality. Video Use THUMB STICK or to highlight Picture Mode settings. When SPORTS mode is selected, the following are automatically set: CONTRAST - 100%, COLOR TEMPERATURE - HIGH, LOUDNESS - OFF, PERFECT VOLUME - OFF, BASS - 63%,SU...
Page 47 - Auto Digital Convergence Adjustment
VIDEO 47 Magic Focus MAGIC FOCUS MAGIC FOCUS Auto Digital Convergence Adjustment Please turn ON your television for at least 20 minutes before using this feature. The Magic Focus button on control panel will not work when adjustment mode is set to Manual (see page 48). Your HITACHI Projection TV has...
Page 48 - Manual Convergence Adjustment Mode; DONE
VIDEO 48 NOTES: 1. Please turn ON your television for at least 20 minutes before using this feature. 2. Auto Adjustment Mode is recommended. If convergence is still not acceptable, use the Manual Adjustment Mode.DO NOT press MAGIC FOCUS or use Auto Adjustment Mode after using Manual Adjustment Mode....
Page 49 - Color System
VIDEO 49 Your HITACHI Projection TV has an ADVANCED SETTINGS function which will automatically adjust picturesettings to produce the highest quality picture possible.When ADVANCED SETTINGS is highlighted, press down on THUMB STICK to access an ADVANCEDSETTINGS feature. Use THUMB STICK to highlight f...
Page 50 - This function controls the low frequency audio to all speakers.; Bass
AUDIO 50 Select AUDIO to adjust the TV to your preference and to improve the sound quality. Audio MENU THUMB STICK THUMB STICK SELECT THUMB STICK SELECT Setup Locks Ch. Manager Audio Video Move SEL Sel Next/Prev Change Value Return SEL Sound Enhancement Balance Bass Treble Audio Move SEL Return 50% ...
Page 51 - To enter SOUND ENHANCEMENT, use THUMB STICK; Technology; BBE Mach3Bass provides rich and natural bass sound.
AUDIO 51 Sound Enhancement The following surround settings will reproduce the “live” sound you would hear in concer t halls,spor ts stadiums, movie theaters, etc. with only two speakers. THUMB STICK SELECT Audio Move SEL Return Sound Enhancement Sound Enhancement Balance Bass Treble Audio 50% 50% SR...
Page 52 - Audio Source; Press THUMB STICK; Internal Speakers; On - Select this feature if using the internal speakers only.; Auto Noise Cancel
AUDIO 52 Use ADVANCED SETTINGS to improve the sound performance of your TV, depending on listening conditions. Audio Source Multi-Channel Television Sound will allow you to select STEREO (a stereo broadcast), MONO (monaural sound) used when receiving aweak stereo broadcast or SAP (second audio progr...
Page 53 - Advanced; Press THUMB STICK; DTV Language; This function allows you to select between Dolby
AUDIO 53 Use ADVANCED DIGITAL if your TV is connected to an amplifier/receiver with optical digital input with DolbyDigital or PCM decoder capabilities. Advanced Digital THUMB STICK SELECT Audio Move SEL Return Advanced Digital Sound Enhancement Balance Bass Treble Audio DTVLanguage 1 2 3 4 [English...
Page 54 - CHANNEL MANAGER; Channel; Scan
CHANNEL MANAGER 54 Press THUMB STICK or to review more channels. Press EXIT to quit menu. THUMB STICK SELECT Ch. Manager Move SEL Return Ant A Ant B (NTSC) Ant A (NTSC) Ch. Manager CH# Scan CH ID Lock 2 Off -------- 3 Off -------- 4 Off -------- 5 Off -------- 6 Off -------- 7 Off -------- 8 Off ---...
Page 55 - To get CHANNEL ID in ANT C, Auto Channel Scan must be done first.; Channel ID
CHANNEL MANAGER 55 This selection contains advanced features which will make TV viewing easier and more enjoyable. Usethis feature to give up to 20 channels a name when ANTENNA signal source is selected and up to 60channels a name when CATV signal source is selected. NOTES: 1. If ANT A and ANT B are...
Page 56 - LOCKS
LOCKS 56 This function will block out the picture and sound of the selected channel or video input.It can also be used to keep the TV from being viewed for a scheduled time period that you set. The code to enter the Locks feature is a four digit secret code number. The factory preset code is 0000.Us...
Page 57 - Use THUMB STICK; Movie has not been rated or; PG
LOCKS 57 Use MOVIE RATINGS to block from showing any movie you feel might have inappropriate content. Use THUMB STICK or to select the MOVIE RATING category that you want to block. Press SELECT to block the MOVIE RATING that you have selected. Once rating is selected, for example PG-13, allmovies ra...
Page 58 - The program; FV; If you Block TV-14D, you will still permit
LOCKS 58 TV Ratings THUMB STICK SELECT Locks Move SEL Return TV Ratings Movie Ratings TV Time Lock Engage Lock Change Access Code Locks Status TV Ratings Move SEL Select Canadian Ratings (Eng) Canadian Ratings (Frn) TV-Y: TV-Y7: TV-YG: TV-PG: TV-14: TV-MA: MENU THUMB STICK Sub Rating D L S V FV TV P...
Page 59 - Canadian Ratings; Canadian Ratings English Chart; Programming intended for children under age 8 -; Violence Guidelines Careful
LOCKS 59 Canadian Ratings (Eng) THUMB STICK SELECT Locks Move SEL Return Canadian Ratings (Eng) Movie Ratings TV Time Lock Engage Lock Change Access Code Locks Status TV Ratings Move SEL Select Canadian Ratings (Eng) Canadian Ratings (Frn) C: C8+: G: PG: 14+: 18+: MENU THUMB STICK Canadian Ratings E...
Page 60 - Canadian Ratings French Chart
LOCKS 60 Canadian Ratings (Frn) THUMB STICK SELECT Locks Move SEL Return Canadian Ratings (Frn) Movie Ratings TV Time Lock Engage Lock Change Access Code Locks Status TV Ratings Move SEL Select Canadian Ratings (Eng) Canadian Ratings (Frn) G: 8 ans+: 13 ans+: 16 ans+: 18 ans+: MENU THUMB STICK Canad...
Page 61 - SETUP; Menu Preference
SETUP 61 Select SETUP when setting your TV up for the first time. Use the THUMB STICK or on the remote to highlight the function desired. This feature will allow you to select any one of three different languages for all on-screen displays. Use THUMB STICK , to highlight the language of your choice....
Page 62 - Set The
SETUP 62 The time must be adjusted before you can use the “Set Event Timer” or “TV Time Out” features. Use THUMBSTICK , , , to highlight the chosen Time Zone settings. Press down on THUMBSTICK to select.If you observe daylight savings, use THUMBSTICK to highlight “Daylight Saving Correction” and pre...
Page 64 - Reception channels are shown at the left.; Press down on THUMB STICK to Close or press Exit to quit MENU.; AIR; RECEPTION BAND
SETUP 64 Reception channels are shown at the left. Refer to your cable or TV guide for channel identification standards. When in ANT C, select Signal Meter when using an indoor or outdoor antenna. This feature will show the sig-nal strength and peak values of the Antenna signal to help you adjust yo...
Page 65 - If two antenna are; Auto Channel Scan
SETUP 65 This feature will automatically store active TV channels in Auto Channel Scan. This will allow you to skipunused channels when using CHANNEL UP ( ) or DOWN ( ). If the EXIT button is pressed while AUTO CHANNEL SCAN function is engaged, programming will stop. If two antenna are connected, sw...
Page 66 - Use this feature to give a name to any of the five video inputs.
SETUP 66 Use this feature to give a name to any of the five video inputs. Press THUMB STICK , , , , to highlight the name of the video inputs. Press down on THUMB STICK to select desired input name. Select RESET to set video names to original factory preset condition. Set The Inputs THUMB STICK SELE...
Page 67 - Video 2 Auto Link
SETUP 67 Use this function to automatically turn the TV on and tune to Video2 when it detects a video signal to input 2. Use THUMB STICK or , then press down on THUMB STICK to change AUTO LINK setting. When AUTO INPUT SIGNAL SENSOR is selected, the TV will turn on and tune to Video2 automatically, w...
Page 70 - Auto; Closed Caption
SETUP 70 Caption Display: On/Off will turn the display on or off. Auto will turn the display on when Mute/Soft Mute is on. Caption Mode: Captions is for the program you are viewing. Text is for additional information such as news reports or a TV program guide. This information covers the entire scre...
Page 71 - This feature will select the source of the Monitor Output.; Set Monitor Out; About Your TV
SETUP 71 This feature will select the source of the Monitor Output. Set Monitor Out THUMB STICK SELECT Setup Move SEL Return Set Monitor Out Monitor OutMonitor TV Tuner Out Set The Channels Set The Clock Menu Preference Setup Set The Inputs Move SEL Select Set Event Timer Set Closed Captions About Y...
Page 72 - DO; Dust the screen and cabinet with a soft cloth.; DO NOT; Do not touch the screen too often.
72 CARE OF YOUR HITACHI TELEVISION AND YOUR REMOTE CONTROL DO Dust the screen and cabinet with a soft cloth. Clean the screen with a soft cloth moistened in warm water and dr y with a soft cloth. A mild soap may be used ifthe screen is extremely dir ty. Place your Television away from extreme heat, ...
Page 73 - RECEPTION PROBLEMS
73 RECEPTION PROBLEMS • IGNITION NOISE:Black spots or horizontal streaks may appear, picture may flutter or drift.Usually caused by interference from automobile ignition systems, neonlamps, electrical drills, and other electrical appliances. • GHOSTS:Ghosts are caused by the television signal follow...
Page 74 - USEFUL INFO; Press the power switch again.; SYMPTOMS; CHECK THESE ITEMS
USEFUL INFO 74 HITACHI Projection Television incorporates advanced power surge protection technology designed to protect againstcomponent or circuit damage due to external or internal voltage power surges. IF YOUR TELEVISION SHOULD APPEAR TO HAVE A LOSS OF POWER, PLEASE FOLLOW THIS PROCEDURE: 1. Pre...
Page 76 - Home Electronics Division; service; DIAL TOLL FREE; days a week, 24 hours a day
USEFUL INFO 76 Hitachi America, LTD. Home Electronics Division 1855 Dornoch Court San Diego, CA 92154 Hitachi America, LTD.Home Electronics Division Hitachi has made ever y effor t to assure you hours of trouble free operation from your unit. However, should you require ser vice,a network of Hitachi...
Page 77 - pour obenir votre copie.; Mississauga, ON L5N 2L8
USEFUL INFO 77 In Canada: 1-800-HITACHI (1-800-448-2244) Monday - Friday EST 9:00am - 7:00pm Saturday EST 9:00am - 5:00pm Hitachi Canada, LTD.Digital Media Division Should you have any questions regarding warranty, service, operation, or technical assistance, please contact: Look for your French Man...
Page 78 - INDEX
78 INDEX INDEX Clock Time, 62Time Zone, 62 A Date, 62 Closed Captions Accessories, 4 Analog Captions, 70 Antennas (Connecting), 5, 6 Digital Captions, 70 Aspect Ratio, 28 Color System, 49 Audio (Advanced Digital) Color Temperature, 49 DTV Language, 53 Color, 46 Optical Output, 53 Contrast, 46 Dolby ...
Hitachi WH14DBL
User Manual
Hitachi DS14DSFL
User Manual
Hitachi L32A104
User Manual
Hitachi CG22EADSL
User Manual
Hitachi CS33EB
User Manual
Hitachi C10FCH2
User Manual
Hitachi WH18DSDL
User Manual
Hitachi LE49S508
User Manual
Hitachi L46S604
User Manual
Hitachi CG23ECPSL
User Manual
Hitachi DB3DL2
User Manual