Hitachi 51F710E - Manuals - manualsarea.com

Page 2 - Important Safety Instructions; CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,; CAUTION; RISK OF ELECTRIC SHOCK

2 SAFETY POINTS YOU SHOULD KNOW ABOUTYOUR HITACHI TELEVISION Our reputation has been built on the quality,performance, and ease of service of HITACHI televisions. Safety is also foremost in our minds in the design ofthese units. To help you operate these productsproperly, this section illustrates sa...

Page 4 - Accessories; REMOTE CONTROL BATTERY INSTALLATION AND REPLACEMENT; “Z” Allen Key; First time use

4 Accessories Check to make sure you have the following accessories before disposing of the packing material. CAUTION: This SLF10 TV Top Shelf for use only with Hitachi 51F710E, 57F710E, 51F710A and 57F710A . Use with other apparatus is capable of resulting in instability causing possible injury. Re...

Page 5 - How to set up your new HITACHI Projection Television; ANTENNA; Your new; VIEWING; The major benefit of the; HITACHI; Projection Television; BEST

5 How to set up your new HITACHI Projection Television ANTENNA Unless your TV is connected to a cable TV system or to a centralized antenna system, a good outdoor TV antennais recommended for best performance. However, if you are located in an exceptionally good signal area that is freefrom interfer...

Page 6 - Hook-up Cables and Connectors

6 Most video/audio connections between components can be made with shielded video and audio cables that havephono connectors. For best performance, video cables should use 75-Ohm coaxial shielded wire. Cables can bepurchased from most stores that sell audio/video products. Below are illustrations an...

Page 7 - Quick Reference Remote Control Buttons and Functions; POWER BUTTON; VCR –; Video Cassette Recorder/Player; CBL –; Cable Box; DVD –; Digital Video Disc Player; STB –; Satellite Receiver

7 Quick Reference Remote Control Buttons and Functions First time use POWER BUTTON (TV, CBL, VCR, DVD, SAT) Turns the selected device on and off. INPUTS BUTTON (TV) Accesses the INPUTS menu system. ASPECT BUTTON (TV) Changes the aspect ratio while watching TV. MENU BUTTON (CBL, DVD, SAT, TV) Accesse...

Page 8 - Front Panel Controls; CHANNEL selector

8 Front Panel Controls First time use MENU/SELECT button This button allows you to enter the MENU , making it possible to set TV features to your preferencewithout using the remote. This button also servesas the SELECT button when in MENU mode. INPUT/EXIT button Press this button to display the inpu...

Page 9 - Front Panel Jacks and Connections; played back picture may be abnormal.

9 Front Panel Jacks and Connections First time use The front panel jacks are provided as a convenience to allow you to easily connect a camcorder or VCR as shownin the following examples: NOTE: 1. Completely insert connection cord plugs when connecting to front panel jacks. If you do not, the played...

Page 10 - Rear Panel Connections; Antenna Input; logo and High-Definition; Upgrade Card

10 Rear Panel Connections First time use Antenna Input CABLE – A 75-Ohm RF antenna or CATV (Cable TV) input. AIR – A 75-Ohm RF antenna input. NOTE: You may ask your local cable companywhether DTV services are available. Audio/Video INPUTS 1, 2, 3 and 4 By using the INPUTS button, CURSOR buttons and ...

Page 11 - on the Internal Speakers Settings of; CableCARD Slot; Please see Appendix on page 64 for; EXIT; button to exit the second screen.; OR

TV AS CENTER (INPUTS 1-4) These jacks are for stereo amplifiers with centersignal output capability. This feature allows the TVspeakers to be used as a center speaker. The TVmust be set as a center channel by selecting TV AS CENTER on the Internal Speakers Settings of the Audio Menu (see page 36). C...

Page 12 - TIPS ON REAR PANEL CONNECTIONS; INPUT 3

12 TIPS ON REAR PANEL CONNECTIONS • S-VIDEO , Y-P B P R and HDMI connections are provided forhigh performance laserdiscplayers, VCRs etc. that havethis feature. Use theseconnections in place of thestandard video connection ifyour device has this feature. • If your device has only oneaudio output (mo...

Page 13 - Connecting External Audio Sources

Match the numbers below to the diagram forspeaker placement. The television’s internal speakers will act ascenter speaker (select AUDIO - INTERNAL SPEAKERS - TV AS CENTER ). These FRONT left and right speakers areconnected to the FRONT output of aseparate audio amplifier. These REAR left and right s...

Page 14 - Connecting External Video Sources

14 BEFORE OPERATING EXTERNAL VIDEO SOURCE Connect an external source to the INPUT terminal, thenpress the INPUTS button to show the INPUTS menu. Use the CURSOR PAD to select the CABLE, AIR or INPUT of your choice. Then press the SELECT button to confirm your choice (see page 21). NOTE: When the TV i...

Page 16 - Completely insert the connection cord

CONNECTING A COMPONENT SOURCE WITHHDMI OR DVI CAPABILITY TO INPUT 1 1. Connect the HDMI or DVI to HDMI connectioncable from the output of the HDTV set top box orDVD player to the HDMI input as shown on the TVto the right. When using a component with DVIoutput, you also have to connect the AUDIO OUT(...

Page 17 - Completely insert the connection cord

CONNECTING A COMPONENT AND AN AUDIOSOURCE TO INPUT 3 OR 4: Y-P B P R . 1. Connect the cable from the Y OUT of theLaserdisc/DVD player or HDTV set top box to theINPUT (Y) jack, as shown on the TV to the right. 2. Connect the cable from the C B /P B OUT or B-Y OUT of the Laserdisc/DVD player or HDTV s...

Page 18 - The Remote Control; The Remote Contr

18 In addition to controlling all the functions on your HITACHI Projection TV, the new remote control is designed to operate different types of VCRs, CATV(Cable TV) converters, set-top-boxes, satellite receivers(SAT) and DVD players with one touch. Basic operationkeys are grouped together in one are...

Page 19 - Freeze; How to Use the Remote to Control Your TV

POWER button Press this button to turn the TV set on or off whenthe remote is in TV mode. (See page 20 forinstructions on how to set the remote control to TVmode.) MODE buttons These buttons allow the remote to control your TV,VCR, DVD, Cable box/Satellite box depending onwhich button is pressed. PA...

Page 22 - RECORD button

22 VOLUME (VOL), MUTE button Press the VOLUME button ( or ) until you obtain the desired sound level. To reduce the sound to one half of normal volume(SOFT MUTE) to answer the telephone, etc., pressthe MUTE button. Press the MUTE button again to turn the sound off completely (MUTE). To restorethe so...

Page 23 - PIP button; CURSOR; MAIN PICTURE; SUB

Your HITACHI Projection TV incorporates Two Tuner technology designed for improved viewing enjoyment.This Two Tuner feature allows you to view antenna inputson both the main picture and sub-picture simultaneously,with separate tuning control for each. When a DIGITAL channel is viewed as the main pic...

Page 24 - SUB PICTURE

24 PIP Mode Picture-in-Picture This feature is only available with a Digital 16:9,720p and 1080i signal. To prevent a pattern burn,occasionally move the sub-picture using the CURSOR buttons. SPLIT Mode Picture-in-Picture Split Mode PIP displays the main picture and sub-picture evenly on the screen. ...

Page 25 - FREEZE

MAIN FREEZE Press the PAUSE button to freeze one frame of the picture you are currently viewing and the frozenframe will show in the Main Picture. Press the EXIT button to return to normal viewing. This feature isuseful for freezing a picture frame with addresses. SPLIT FREEZE Press the PAUSE button...

Page 26 - If your cable box cannot be operated after; PRECODED CABLE BOX buttons; The Remote Control for Cable Box Functions

26 OPERATING THE PRECODED FUNCTION FOR YOUR CABLE BOX. This remote is designed to operate different types ofcable boxes. You must first program the remote tomatch the remote system of your cable box (referbelow for pre-codes). 1. Turn ON your cable box. 2. Aim the remote control at the front of your...

Page 27 - Turn; ON; Hold down the; button on the remote and enter; SAT; button. The remote will turn; EXCLUSIVE TV buttons; These buttons are for operating the TV.; SATELLITE BRAND; The Remote Control for Set-Top Box/Satelite Receiver Functions

OPERATING THE PRECODED FUNCTION FORYOUR SET-TOP-BOX/SATELLITE RECEIVER. This remote is designed to operate different types ofset-top-box/satellite systems. You must first programthe remote to match the remote system of your set-top-box/satellite systems (refer below for pre-codes). 1. Turn ON your s...

Page 28 - If your DVD player cannot be operated; DVD button; The Remote Control for DVD Functions

28 OPERATING THE PRECODED FUNCTION FOR YOUR DVD PLAYER. This remote is designed to operate different types ofDVD players. You must first program the remote tomatch the remote system of your DVD player (referbelow for pre-codes). 1. Turn ON your DVD player. 2. Aim the remote control at the front of y...

Page 29 - If your VCR cannot be operated after; VCR button; The Remote Control for VCR Functions

OPERATING THE PRECODED FUNCTION FOR YOUR VCR. This remote is designed to operate different types ofVCRs. You must first program the remote to match theremote system of your VCR (refer below for pre-codes). 1. Turn ON your VCR. 2. Aim the remote control at the front of your VCR. 3. To switch to VCR p...

Page 30 - een Display

30 1. Press MENU on the remote control to display the different features on your HITACHI Projection TV. 2. Press the CURSOR buttons to navigate and highlight a different feature of the On-ScreenDisplay menu. Press the SELECT button to select. 3. Press EXIT on the remote control to quickly exit from ...

Page 31 - only available for Digital channels.

Picture Mode Select between the two picture modes; Day and Night. Contrast Adjust contrast. Brightness Adjust brightness. Color Adjust color. Tint Adjust tint. Sharpness Adjust sharpness. Color Temperature Set this to High for less intense color with more blue, set to Medium for natural color, set t...

Page 32 - Video

32 Select VIDEO to adjust picture settings and improvepicture quality. You can independently customize eachof the Video Inputs to your preference to increaseviewing performance and pleasure depending upon thevideo program being viewed. If RESET is selected, onlythe selected input will reset to initi...

Page 34 - Reset Video Settings; and

34 Black Side Panel The BLACK SIDE PANEL function turns the gray side bars on/off when watching 4:3 signals in Standard mode.The top/bottom gray bar will appear in SPLIT MODE PIP and SPLIT FREEZE. The TV set will always return to “SetBlack Side Panel - OFF” setting every time the TV is powered “OFF”...

Page 35 - Treble; SRS and the; BBE; Audio

Select AUDIO to adjust the TV to your preference andto improve the sound quality. 1. Use the CURSOR buttons or to highlight the function to be adjusted. 2. Press the CURSOR buttons or to adjust the function. 3. Press EXIT to quit the menu or select AUDIO to return to the main menu. NOTE: If TREBLE i...

Page 36 - MONO

36 Audio Source Multi-Channel Television Sound will allow you to select STEREO (a stereo broadcast), MONO (monaural sound) used when receiving a weak stereo broadcast or SECOND AUDIO PROG (SA) which may be a secondary language, weather report, etc. The sources received will be displayed at the top l...

Page 38 - Signal Meter; Channel Manager

38 Select CHANNEL MANAGER to set your Antenna options, run Auto Channel Scan, Check Signal Meterand Set Channel List. 1. Use the CURSOR buttons or to highlight the function to be adjusted. 2. Press the SELECT button or CURSOR button to select. Signal Meter Select SIGNAL METER when using an indoor or...

Page 39 - Auto Channel Scan; Channel List; AUTO CHANNEL SCAN

Auto Channel Scan This feature will automatically store active TV channelsin Auto Channel Scan memory. 1. Use the CURSOR buttons or to highlight CABLE or AIR . 2. Press the CURSOR buttons or to highlight the START or RESET option. 3. Press the SELECT button to select. NOTE: When a CableCARD is insta...

Page 40 - If; Locks

40 This function will block out the picture and sound of theselected channel or video input. It can also be used tokeep the TV from being viewed for a scheduled timeperiod that you set. The code to enter the Locks feature is a four digitaccess code number. The factory preset code is 0000 . Use the N...

Page 41 - NOT RATED

Movie Ratings Use Movie Ratings to prevent viewing of any movie thatyou feel may be inappropriate due to its content. 1. Use the CURSOR buttons or to select the MOVIE RATING category that you want to block. 2. Press SELECT to block the MOVIE RATING that you have selected. Once rating is selected, fo...

Page 42 - TV Ratings; EAS

42 Locks On-Scr een Display TV Ratings Use TV RATINGS to prevent the viewing of any TV program that you feel may be inappropriate due to itscontent.1. Use the CURSOR buttons or to select the TV RATING category that you want to block. 2. Press SELECT to block the TV RATING that you have selected. 3. ...

Page 45 - Set The Clock; AUTOMATICALLY ADJUST CLOCK FOR DAYLIGHT SAVING CHANGES; Timers

Select TIMERS to set your Clock, Sleep Timer, Event Timer and Day/Night Timer Recordings. 1. Use the CURSOR buttons or to highlight the function to be adjusted. 2. Press the SELECT button or CURSOR button to select. Set The Clock The Clock must be adjusted before you can use the SET EVENT TIMER or D...

Page 46 - Set Sleep Timer; When the clock is changed in the

46 Set Sleep Timer Select this feature to set your SLEEP TIMER from 30 minutes to 3 hours (30 minute increments). 1. Press the CURSOR buttons or repeatedly to set your Timer from 0:00 , 0:30 , 1:00 , 1:30 , 2:00 , 2:30 and 3:00 . Set Day/Night Timer Select this feature to activate and set your TV’s ...

Page 47 - Set Event Timer

47 Timers On-Scr een Display Set Event Timer This function will automatically operate the ProjectionTV viewing reservation of a program. If the clock is notset, you can not use this function and the screen belowwill appear. The message on the screen will disappearafter 3 seconds, then the screen aut...

Page 48 - M A G I C F O C U S; Setup

48 Select SETUP when setting your TV up for the first time. 1. Use the CURSOR buttons or to highlight the function to be adjusted. 2. Press the SELECT button or CURSOR button to select. Magic Focus Tune Up Auto Digital Convergence Adjustment Please turn ON your television for at least 20 minutes bef...

Page 50 - To Move Adjustment Point

50 Setup On-Scr een Display Manual Convergence Adjustment Mode (9 Point Manual Adjustment) NOTE: 1. Please turn ON your television for at least 20 minutes before using this feature. 2. AUTO ADJUSTMENT MODE is recommended. If convergence is still notacceptable, use the MANUAL ADJUSTMENT MODE. 3. If A...

Page 53 - INPUT 4 Auto Link; Once the TV has been turned on using the; Set Closed Caption

INPUT 4 Auto Link Use this function to automatically turn the TV on andtune to INPUT 4 when it detects a video signal to INPUT 4 . 1. Use the CURSOR buttons or to highlight the AUTO LINK setting of your choice. 2. When AUTO is selected, the TV will turn on and tune to INPUT 4 automatically, when the...

Page 54 - Digital Captions; Some types of digital closed captions will not work with this TV.; Set Monitor Out; When

54 Setup On-Scr een Display Digital Captions Set captions for digital programs. This functionwill help choose and set available language,font, size and style of digital captions. 1. Use the CURSOR buttons , , or to highlight and select DIGITAL CAPTIONS feature. 2. Press EXIT to quit menu or CURSOR b...

Page 56 - Please remove 3 screws (; 7” Disassembly/Assembly Instructions; Useful Information

56 IMPORTANT POINTS: (a) Do not attempt to perform this work by yourself. (b) Request an installation specialist to install this unit. (c) HITACHI assumes no responsibility or liability for injury/damage as a result of consumer installation and handling. Be advised that improper consumer installatio...

Page 57 - STEP 6; When the TV is separated, the top

STEP 4 Remove the sensor box by unscrewing the 2 screwslocated on both sides of the sensor box, see (a).Rotate the sensor box and there are 4 low voltageconnectors located on the sensor board, see (b).Disconnect the connector with the brown wires(PDSE), see (c) and (d). (Make sure to push thecenter ...

Page 58 - ASSEMBLY PROCEDURE; This completes the Disassembly and Assembly instructions.

58 ASSEMBLY PROCEDURE STEP 10 Re-install the top (4) four screws into the lower rearcover, see (a). Re-install the (4) four side screws thathold the back cover to the cabinet, see (b). STEP 11 Re-connect the sensor connector to the sensorboard, see (a). Re-install the sensor box, see (b). STEP 12 Re...

Page 59 - 5” Disassembly/Assembly Instructions

59 65” Disassembly/Assembly Instructions Useful Information IMPORTANT POINTS: (a) Do not attempt to perform this work by yourself. (b) Request an installation specialist to install this unit. (c) HITACHI assumes no responsibility or liability for injury/damage as a result of consumer installation an...

Page 62 - TROUBLESHOOTING; Press the; DO; Dust the screen and cabinet with a soft cloth.; DO NOT; Do not touch the screen too often.; Equipment Care and Troubleshooting

62 Useful Information TROUBLESHOOTING HITACHI Projection Television incorporates advanced power surge protection technology designed to protect against component or circuit damage due to external or internal voltage power surges. IF YOUR TELEVISION SHOULD APPEAR TO HAVE A LOSS OF POWER, PLEASE FOLLO...

Page 63 - Reception Problems; RADIO FREQUENCY INTERFERENCE:

63 Useful Information Reception Problems IGNITION NOISE: Black spots or horizontal streaks may appear, picture may flutter or drift.Usually caused by interference from automobile ignition systems, neon lamps,electrical drills, and other electrical appliances. GHOSTS: Ghosts are caused by the televis...

Page 64 - SRS and; Features and Specifications

64 Useful Information FEATURES: • Superfine Picture Quality; 1280 Line HorizontalResolution • Remote (Controls many PVR/VCR brands, cableboxes, satellite boxes, and other audio equipment). • New Easy-to-Use (3-Language) On-Screen Menu • Full Set of Input Jacks, including S-Video • COMPONENT VIDEO: Y...

Page 65 - Hitachi; has made every effort to assure you hours of; Authorized; pour; Service Hotline; To locate an authorized; service facility in the continental; DIAL TOLL FREE; days a week, 24 hours a day

65 Useful Information Hitachi HITACHI AMERICA, LTD. HOME ELECTRONICS DIVISION HITACHI has made every effort to assure you hours of trouble free operation from your unit. However, shouldyou require service, a network of HITACHI Authorized Service Facilities has been established in all 50 statesand Pu...

Page 66 - END USER LICENSE AGREEMENT FOR HITACHI DTV SOFTWARE; End User Licence Agreement for HITACHI DTV Software

66 END USER LICENSE AGREEMENT FOR HITACHI DTV SOFTWARE IMPORTANT – READ CAREFULLY: This End User License Agreement for HITACHI DTV Software (this “Agreement”) is a legal agreement between you (“you” or “your”), in your capacity as the owner of a HITACHI brand digital television (the “DTV”), and HITA...

Page 67 - Index; The; Appendix – Additional CableCARD Information

67 A Accessories .............................4 Antennas (Connecting) ............5 Aspect Ratio..........................20 Audio Languages .........................37 Dolby Digital.......................37 DRC (Dynamic Range Compression)..................37 SRS .......................................

Page 68 - Notes