Hilti 3608328 - Manuals

English 9 5.3 Removing the battery 1. Press the battery release buttons.2. Remove the battery from the tool. 5.4 Fitting the saw blade 1. Remove the battery. → page 92. Push the saw blade (teeth facing the cutting direction) into the blade holder until it engages. 3. Grip and pull the saw blade to c...

10 English 1. Remove the battery. → page 92. Push the saw blade release lever to the side, as far as it will go. ◁ The saw blade will be released and ejected. 5.6 Fitting the guard 1. Remove the battery. → page 9 2. Push the guard onto the power tool from the front until it clicks into place. Note T...

English 11 2. Tilt the guard slightly and pull it off toward the front. 5.8 Dust removal system Note The dust removal system reduces dust emissions, increases working safety by providing better visibility of the cutting line and reduces exposure to dust and wood chips at the workplace. 1. Fit the gu...

12 English 5.8.2 Removing the suction adapter 1. Press the two retaining catches inwards.2. Pull the suction adapter away from the base plate toward the rear. 3. Pull the vacuum cleaner hose off the suction adapter. 5.8.3 Cleaning the suction adapter 1. Remove the battery. → page 9 2. Remove the suc...

English 13 ▶ Set the stroke rate regulator thumbwheel to a setting between 1 (low) and 6 (high). 5.11 Setting the cutting angle 1. Remove the battery. → page 92. Remove the suction adapter. → page 12 3. Slacken the screw on the base plate. 4. Adjust the base plate to the desired cutting angle (from ...

14 English 1. Remove the battery. → page 92. Press the anti-splinter insert into the base plate from below. 6 Operation 6.1 Switching on 1. Insert the battery. → page 8 Note A safety interlock ensures that the tool doesn’t start when the tool is first switched on and the battery then fitted, i.e. sl...

English 15 4. Press the product firmly against the workpiece and begin the plunge cut by slowly reducing the angle of attack. 5. Once the blade has penetrated right through the workpiece, bring the product into its normal working position. ◁ The base plate then lies flat on the working surface. 6. C...

16 English Storage CAUTION Inadvertent damage caused by defective battery. A leaking battery may damage the tool. ▶ Always remove the battery before storing the tool. ▶ Store the tool and batteries in a place that is as cool and dry as possible. ▶ Never store batteries in direct sunlight, on heating...

English 17 It collects a high percentage of the dust generated and can be quickly and easily attached to the orbital- action jig saw. The dust removal module is equipped with a suction fan. This fan is driven by its own motor. When the orbital-action jig saw is switched on the dust removal module dr...