Hayter 407D - Manuals

Hayter 407D – Manual in PDF format online.

Manuals:

Manual

Manual Hayter 407D

Summary

Page 2 - TABLE OF CONTENTS

2 276798MA DRAFT COPY TABLE OF CONTENTS OWNER’S INFORMATION 4 SAFETY PRECAUTIONS 4 INTERNATIONAL PICTORIALS 7 ASSEMBLY 8 OPERATION 11 MAINTENANCE 14 TROUBLE SHOOTING CHART 20 REPAIR PARTS 22 Declared vibration emission values in accordance with Directive 98/37/EC. Vibration Emission according to EN ...

Page 3 - LIMITED WARRANTY

3 276798MA DRAFT COPY Hayter Limited warrants to the original user / purchaser that this unit shall be free from defects in material and workmanship under normal use and service for a period of three years from the date of purchase. The manufacturers of the engine and battery pack system (where appl...

Page 4 - SAFETY RULES; OWNER’S INFORMATION; Responsibility Of The Owner; The responsibility of the owner is; General Operation

SAFETY RULES 4 276798MA DRAFT COPY OWNER’S INFORMATION Know your product: If you understand the unit and how the unit operates, you will get the best performance. As you read this manu- al, compare the illustrations to the unit. Learn the location and the function of the controls. To help prevent an...

Page 7 - INTERNATIONAL PICTORIALS; Safety Warning Pictorials

SAFETY RULES 7 276798MA DRAFT COPY INTERNATIONAL PICTORIALS IMPORTANT: The following pictorials are located on your unit or on literature supplied with the product. Before you operate the unit, learn and understand the purpose for each pictorial. 1 2 6 7 3 8 4 5 9 Safety Warning Pictorials 1 WARNING...

Page 8 - ASSEMBLY; Owner’s Manual; TOOLS REQUIRED; TO REMOVE THE

ASSEMBLY 8 276798MA DRAFT COPY ASSEMBLY CONTENTS OF PARTS BAG 1 − Owner’s Manual 1 − Parts Bag 1 − Safety Glasses (Not shown actual size) 2 Sets − Trimmer Lines (0.155 inch diameter) 1 − Bag (4 Screws) 1 − 20 oz. Bottle Oil WARNING: Always wear safety glasses or eye shields while as- sembling the ma...

Page 9 - HOW TO RAISE THE HANDLE

ASSEMBLY 9 276798MA DRAFT COPY HOW TO RAISE THE HANDLE 1. Hold the handle with one hand and loosen both handle adjustment knobs until the ratchet teeth are disengaged. Do not remove the handle adjustment knobs . See Figure 2. 2. Raise the handle to the operating position. 3. Stand in the operator’s ...

Page 10 - ENGINE PREPARATION; Fill Crankcase With Oil; CHECKLIST

ASSEMBLY 10 276798MA DRAFT COPY ENGINE PREPARATION Note: Engine does not contain OIL or PETROL. WARNING: Follow the engine manufacturer’s instructions for the type of petrol and oil to use. Always use a safety petrol container. Do not smoke when adding petrol to the en- gine. When inside an enclosur...

Page 11 - OPERATION; KNOW YOUR POWERTRIM; Trimmer Head Drive Lever; EYE PROTECTION

OPERATION 11 276798MA DRAFT COPY KNOW YOUR POWERTRIM READ THE OWNER’S HANDBOOK AND ALL SAFETY RULES BEFORE YOU OPERATE the machine. To familiarise yourself with the location of the controls, compare the illustrations with your machine. Save this handbook for future reference. Trimmer Head Recoil Sta...

Page 13 - HOW TO START THE ENGINE

OPERATION 13 276798MA DRAFT COPY HOW TO START THE ENGINE NOTE: DO NOT BE ALARMED, your engine will smoke the first time it is started. It is burning off the protective coating that is on the internal engine parts. WARNING: Never leave the ma- chine unattended while the en- gine is running. Wait for ...

Page 14 - MAINTENANCE; CUSTOMER RESPONSIBILITIES; SERVICE RECORDS; PRODUCT SPECIFICATIONS

MAINTENANCE 14 276798MA DRAFT COPY CUSTOMER RESPONSIBILITIES SERVICE RECORDS Fill in dates as you complete regular service. Before Each Use Every 5 Hours Every 25 Hours Every 100 Hours As Noted SERVICE DATES Check Engine Oil Level √ Check trimmer Lines √ 1 Check Trimmer Head Engagement √ Engine/Mach...

Page 15 - LUBRICATION

MAINTENANCE 15 276798MA DRAFT COPY LUBRICATION How To Lubricate The Jackshaft Assembly A grease fitting is provided to lubricate the jackshaft assembly. Use a grease gun with au- tomotive type grease to lubricate the jackshaft assembly as shown in Figure 10. Figure 10 Grease Fitting How To Change En...

Page 16 - SPARK PLUG

MAINTENANCE 16 276798MA DRAFT COPY SPARK PLUG Check the spark plug every 25 hours. Re- place the spark plug if the electrodes are pitted or burned or if the porcelain is cracked.1. Make sure the spark plug is clean. Clean the spark plug by carefully scraping the electrodes (do not sand blast or use ...

Page 17 - SERVICE AND ADJUSTMENT

MAINTENANCE 17 276798MA DRAFT COPY SERVICE AND ADJUSTMENT WARNING: Before you inspect, clean or service the machine, stop the engine. Make sure that all moving parts have stopped. Disconnect the wire from the spark plug. HOW TO REPLACE THE TRIMMER LINE For the best performance, use a heavy gauge 3.3...

Page 18 - HOW TO

MAINTENANCE 18 276798MA DRAFT COPY HOW TO REPLACE THE DRIVE BELT To replace the drive belt, the trimmer head and shield must be removed as follows. WARNING: Before you remove the drive belt, disconnect the wire from the spark plug. 1. Remove the two fasteners that hold the rear of the shield to the ...

Page 19 - STORAGE; Trimmer

MAINTENANCE 19 276798MA DRAFT COPY STORAGE WARNING: Do not remove petrol while inside a building, near a fire, or while you smoke. Petrol fumes can cause an explosion or a fire. When the machine is put in storage for thirty days or more, follow the steps below to make sure the machine is in good con...

Page 20 - TROUBLE SHOOTING CHART; TROUBLE

TROUBLE SHOOTING CHART 20 276798MA DRAFT COPY TROUBLE CAUSE CORRECTION Engine does not start Spark plug wire disconnected. Connect spark plug wire. Engine not primed. Prime engine. Defective or incorrectly gapped spark plug. Inspect or replace spark plug. Fuel tank empty. Add fuel. Dirty carburetor ...

Page 22 - REPAIR PARTS

Code 407D REPAIR PARTS 22 276798MA DRAFT COPY 1 2 3 4 5 28 6 2 7 6 8 4 9 10 9 10 4 11 16 17 11 14 12 15 14 20 22 29 23 27 16 19 30 17 6 20 25 24 26 19 18 18 13 31 21 32 33 34

Page 23 - Key

Code 407D REPAIR PARTS 23 276798MA DRAFT COPY Key No. Part No. Description 1 MU740198E549 Lever, Stop 2 MU323035 Bolt 3 MU740193 Cable, Control Latching 4 MU071372 Tie, Cable 5 MU740196E701 Handlebar 6 MU15x116 Nut 7 MU1601039 Control, Throttle 8 MU672510 Guide, Rope 9 MU740202 Knob, Handlebar 10 MU...

Page 26 - NOTES

Page 28 - How To Order Replacement Parts

28 276798MA DRAFT COPY How To Order Replacement Parts Use only manufacturer’s authorised or approved replacement parts. The letter placed on the end of the part number denotes the type of finish for the part, C for chrome, Z for zinc, a PA for purchased assembly. It is important that you include thi...