Harman Kardon MS 150 - Manuals

7 1. Carefully unpack the MS 150, the FM antenna, the analog and digital audio cables, the power supply and detachable cable, the dock for iPod/iPhone and inserts, and the remote control and batteries. 2. Install the batteries in the remote control, following the “+” and “–” symbols in the battery c...

8 MS 150 Operation Figure 1: Setting the Clock Figure 2: Setting the Alarm Using the Remote Control Aim the remote at the front of the MS 150. The remote IR sensor is located in the middle of the front panel, behind the mesh grille, about 25mm (1 in) above the CD slot. Do not block the sensor. The r...

10 MS 150 Operation Troubleshooting Guide Symptom Solution Unit does not function when the Power On button is pushed. • Make sure the AC power cord is securely plugged into a unswitched outlet. If the “PROTECT” message appears, turn off the MS 150 and unplug it. Do not use it without first bringing ...

11 MS 150 Technical Specifications Specifications System Power output 30 watts per channel, 20hz – 20khz, ThD <0.07% into 6 ohms, both channels driven bandwidth 57hz – 27khz, –6db System frequency response 65hz – 20khz, ±3db Signal-to-noise ratio (“A” WTG) 75db Channel separation ≥ 60db Crosstalk...