Page 2 - TABLE OF CONTENTS; Table of Contents; Typographical Conventions; Declaration of Conformity
2 TABLE OF CONTENTS 3 Introduction 4 SUB-TS7 Subwoofer Amplifier PanelControls and Connections 6 Speaker Placement 7 Mounting Options 8 Speaker Connections 8 Speaker-Level Connection Guide 9 Dolby Digital or DTS (or Other DigitalSurround Mode) Connection 10 Dolby Pro Logic (Non-Digital) – Line Level...
Page 3 - INTRODUCTION; ENGLISH; Introduction; Complete home theater speaker system; Included; One center channel speaker
INTRODUCTION 3 Introduction ENGLISH Introduction Thank you for purchasing the Harman KardonHKTS 7, with which you’re about to begin manyyears of listening enjoyment. The HKTS 7 hasbeen custom-designed to provide all the excite-ment and power of the cinema experience inyour own living room. While sop...
Page 4 - REAR PANEL CONNECTIONS; Rear Panel Connections
4 REAR PANEL CONNECTIONS Rear Panel Connections HKTS 7 or HKTS 7BQ System 7 Subwoofer-Level Control: Volume may be adjusted using the Subwoofer-Level Control . Turn the control clockwise to increase the SUB-TS7’s volume, or counterclockwise todecrease it. High-Cut (Low-Pass) Filter Switch: Plac- ing...
Page 6 - SPEAKER PLACEMENT; Speaker Placement; Front Speakers
6 SPEAKER PLACEMENT Speaker Placement Color-Coding System The HKTS 7 uses the channel color-codingsystem established by the Consumer ElectronicsAssociation to make setting up your hometheater speaker system as easy as possible. Yoursystem includes a set of colored stickers thatmay be placed near the...
Page 7 - MOUNTING OPTIONS; Wall-Mounting for Satellites; The customer is responsible for; Mounting Options; Wires to
MOUNTING OPTIONS 7 ENGLISH Wall-Mounting for Satellites Unscrew the bolt that attaches the black shelfstand to the bottom of the speaker. Store thestand and bolt in a safe place in case they areneeded for a future installation. Mount the wall-bracket attachment plate on thewall in the desired locati...
Page 8 - SPEAKER CONNECTIONS; Speaker Connections; Speaker-Level Connection Guide; Before making speaker; Input; or the; Inputs
8 SPEAKER CONNECTIONS Speaker Connections Speaker-Level Connection Guide IMPORTANT NOTE: Before making speaker connections, be certain that your receiver oraudio power amplifier is turned off and prefer-ably unplugged from its AC power source. TheSUB-TS7 subwoofer should not be connected toan AC pow...
Page 9 - Dolby Digital or DTS; or other digital surround processors:; Surround
SPEAKER CONNECTIONS 9 ENGLISH Dolby Digital or DTS ® (or Other Digital Surround Mode) Connection Use this installation method for Dolby Digital,DTS ® or other digital surround processors: Use the line-level input jack marked "SUB" forthe Low-Frequency Effects channel. Connect this jack to th...
Page 10 - Sub Input
10 SPEAKER CONNECTIONS Speaker Connections Dolby Pro Logic (Non-Digital) –Line Level Use this installation method for Dolby Pro Logicapplications (not Dolby Digital, DTS ® or other digital processing), where the receiver/processoris equipped with a subwoofer output, or avolume-controlled preamp (lin...
Page 11 - or other; Front Left; Receiver
SPEAKER CONNECTIONS 11 ENGLISH Speaker Connections Dolby* Pro Logic* (Non-Digital) –Speaker Level Use this installation method for Dolby Pro Logicapplications (not Dolby Digital, DTS ® or other digital processing), where the receiver/processordoes not have a subwoofer output, or a volume-controlled ...
Page 12 - OPERATION; Operation; Volume
12 OPERATION Operation Move the Master Power switch (marked“Power” ) to the “•” (On) position to use the subwoofer. The SUB-TS7 subwoofer will auto-matically turn itself on or go into standby modedepending on whether or not a signal is beingsent to it by your receiver or surround processor,and provi...
Page 13 - TROUBLESHOOTING; Troubleshooting
TROUBLESHOOTING 13 Troubleshooting ENGLISH If there is no sound from • Check that receiver/amplifier is on and a source is playing. any of the speakers: • Check that the powered subwoofer is plugged in, its Power switch is switched on to the “ON •” position. • Check all wires and connections between...
Page 14 - SPECIFICATIONS; Specifications; DTS is a registered trademark of Digital Theater Systems, Inc.
14 SPECIFICATIONS Specifications HKTS 7 System Frequency Response35Hz – 20kHz (–6dB) SAT-TS7Satellites Recommended Power 10 – 80 Watts Impedance8 Ohms nominal Sensitivity86dB @ 1 Watt/1 meter TweeterOne 1/2" dome, video-shielded MidrangeOne 3" driver, video-shielded Dimensions (H x W x D) 16...