Harman Kardon HKTS 11 - Manuals

Page 2 - TABLE OF CONTENTS; Table of Contents; Typographical Conventions; Declaration of Conformity; We, Harman Consumer International

2 TABLE OF CONTENTS 3 Introduction 4 SUB-TS11 Subwoofer Amplifier PanelControls and Connections 6 Speaker Placement 7 Mounting Options 8 Speaker Connections 8 Speaker-Level Connection Guide 9 Dolby Digital or DTS (or Other DigitalSurround Mode) Connection 10 Dolby Pro Logic (Non-Digital) – Line Leve...

Page 3 - INTRODUCTION; Introduction; Complete home theater speaker system; Included; One center channel speaker

INTRODUCTION 3 Introduction Introduction Thank you for purchasing the Harman KardonHKTS 11, with which you’re about to beginmany years of listening enjoyment. The HKTS 11has been custom-designed to provide all theexcitement and power of the cinema experiencein your own living room. While sophisticat...

Page 4 - REAR PANEL CONNECTIONS; Rear Panel Connections; CAUTION

4 REAR PANEL CONNECTIONS Rear Panel Connections OFF ON AUTO ON FILTER NORMAL REVERSE PHASE IN OUT AC 230V~50Hz POWER "WARNING: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE,REPLACE ONLY WITH SAME TYPE T 2.5A L/250 VOLT FUSE" "AVERTISSEMENT: UTILISEZ UN FUSIBLE DE RECHANGE DE MEMETYPE T 2...

Page 5 - Switch

REAR PANEL CONNECTIONS 5 Rear Panel Connections Line-Level Subwoofer (SUB) Input: Con- nect the subwoofer output of a receiver withdigital surround sound decoding, such as Dolby*Digital or DTS ® , to this input. This input bypasses the SUB-TS11’s internal crossover circuitry, andshould only be used ...

Page 6 - SPEAKER PLACEMENT; Speaker Placement; Front Speakers

6 SPEAKER PLACEMENT Speaker Placement Color-Coding System The HKTS 11 uses the channel color-codingsystem established by the Consumer ElectronicsAssociation to make setting up your hometheater speaker system as easy as possible. Yoursystem includes a set of colored stickers thatmay be placed near th...

Page 7 - MOUNTING OPTIONS; The customer is responsible for; Mounting Options

MOUNTING OPTIONS 7 Wall-Mounting Unscrew the bolt that attaches the black shelfstand to the bottom of the speaker. Store thestand and bolt in a safe place in case they areneeded for a future installation. Mount the wall-bracket attachment plate on thewall in the desired location. If possible, positi...

Page 8 - SPEAKER CONNECTIONS; Speaker Connections; Speaker-Level Connection Guide; Before making speaker; Input; or the; Inputs

8 SPEAKER CONNECTIONS Speaker Connections Speaker-Level Connection Guide IMPORTANT NOTE: Before making speaker connections, be certain that your receiver oraudio power amplifier is turned off and pre-ferably unplugged from its AC power source. TheSUB-TS11 subwoofer should not be connectedto an AC po...

Page 9 - Dolby Digital or DTS; or other digital surround processors:; Surround

SPEAKER CONNECTIONS 9 Dolby Digital or DTS ® (or Other Digital Surround Mode) Connection Use this installation method for Dolby Digital,DTS ® or other digital surround processors: Use the line-level input jack marked "SUB" forthe Low-Frequency Effects channel. Connect this jack to the LFE ou...

Page 10 - Sub Input

10 SPEAKER CONNECTIONS Speaker Connections Dolby Pro Logic (Non-Digital) –Line Level Use this installation method for Dolby Pro Logicapplications (not Dolby Digital, DTS ® or other digital processing), where the receiver/processoris equipped with a subwoofer output, or avolume-controlled preamp (lin...

Page 11 - or other; Front Left; Receiver

SPEAKER CONNECTIONS 11 Speaker Connections Dolby* Pro Logic* (Non-Digital) –Speaker Level Use this installation method for Dolby Pro Logicapplications (not Dolby Digital, DTS ® or other digital processing), where the receiver/processordoes not have a subwoofer output, or a volume-controlled preamp (...

Page 12 - OPERATION; Operation; Volume

12 OPERATION Operation Move the Master Power switch (marked“Power” ) to the “•” (On) position to use the subwoofer. The SUB-TS11 subwoofer will auto-matically turn itself on or go into standby modedepending on whether or not a signal is beingsent to it by your receiver or surround processor,and prov...

Page 13 - TROUBLESHOOTING; Troubleshooting

TROUBLESHOOTING 13 Troubleshooting If there is no sound from • Check that receiver/amplifier is on and a source is playing. any of the speakers: • Check that the powered subwoofer is plugged in, its Power switch is switched on to the “ON•” position. • Check all wires and connections between receiver...

Page 14 - SPECIFICATIONS; Specifications; DTS is a registered trademark of Digital Theater Systems, Inc.

14 SPECIFICATIONS Specifications HKTS 11 System Frequency Response35Hz – 20kHz (–6dB) SAT-TS14Satellites Recommended Power 10 – 120 Watts Impedance8 Ohms nominal Sensitivity86dB @ 1 Watt/1 meter TweeterOne 1/2" dome, video-shielded MidrangeDual 3" drivers, video-shielded Dimensions (H x W x ...