Page 2 - TABLE OF CONTENTS; Table of Contents
2 TABLE OF CONTENTS 3 Introduction 4 Connections 5 Controls and Functions 6 Remote Control 7 Operating Instructions 7 Troubleshooting 8 Specifications Table of Contents We, Harman Consumer Group International 2, route de ToursF-72500 Château-du-LoirFrance declare in own responsibility, that the prod...
Page 3 - INTRODUCTION; Introduction; General instructions; ENGLISH
INTRODUCTION 3 Introduction Introduction Congratulations on your choice of the Harman Kardon HK 980 Integrated Amplifier. In order to obtain the best performance from this integrated amplifier, please be sure to read this owner's manual and use your integrated amplifier only in accordance with its i...
Page 4 - CONNECTIONS; Connections
4 CONNECTIONS Connections Connecting Other Components 1. Make sure your amplifier and other compo- nents are turned off. 2. Connect each component's Output/Play jacks to the corresponding Input jacks on the back of your amplifier and, if available, the compo-nent’s Input/Record jacks to the Output j...
Page 5 - CONTROLS AND FUNCTIONS; Controls and Functions
CONTROLS AND FUNCTIONS 5 Controls and Functions 1 Power Indicator: This LED will illuminate in amber when the unit is in the Standby mode to signal that the unit is ready to be turned on. When the unit is in operation, the indicator will turn blue. 2 System Power Control: Press this button to turn o...
Page 6 - REMOTE CONTROL; Remote Control; Independent Remote Control; Operating Conditions; Remote button functions
HK 980 6 REMOTE CONTROL Remote Control Independent Remote Control The system remote of the HK 980 can control the amplifier and compatible Tuners, CD Players and CD Recorders. The remote In jack of units without an integrated IR receiver must be connected to the amplifier's remote control output jac...
Page 7 - OPERATING / TROUBLESHOOTING; Operating Instructions; Making a recording; Troubleshooting
OPERATING / TROUBLESHOOTING 7 Operating Instructions Listening to your CD player, tape deck, tuner or other source 1. Turn Volume control to minimum level and press the flat Power switch to turn on the amplifier. The power indicator lights blue and the protection circuitry checks for short circuit o...
Page 8 - Specifications; NOMINAL
250 Crossways Park Drive, Woodbury, New York 11797 www.harmankardon.comHarman Consumer Group International:2, Route de Tours, 72500 Château-du-Loir, France© 2007 Harman Kardon, Incorporated Part no. 8543 4813 0101 Specifications NOMINAL Continuous Average Power Per Channel (FTC) 8 Ohms: 80 Watts@<...